SKU: 28839390458

Makita DTD 173 T1J Akku Schlagschrauber 18 V 180 Nm 1/4“ Brushless + 1x Akku 5,0 Ah + Makpac - ohne Ladegerät

Sale price$117.32 Regular price$130.36
Save 10%

Pay in installments of $32.59 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 25 - Jul 30

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Makita DTD 173 T1J Akku Schlagschrauber 18 V 180 Nm 1/4“ Brushless + 1x Akku 5,0 Ah + Makpac - ohne LadegerätLieferumfang: 1x Makita DTD 173 Akku Schlagschrauber 1x Makita BL 1850 B Akku 18 V 5,0 Ah 1x Makita Makpac Koffer 1x Universaleinlage ohne Ladegert Produktbeschreibung: Der Akku Schlagschrauber DTD173 von Makita berzeugt durch seine kompakte Bauweise, ein geringes Gewicht und ein beeindruckendes Anzugsdrehmoment von 180 Nm. Dieses vielseitige Werkzeug ist mit vier speziell entwickelten Schraubmodi ausgestattet, die den unterschiedlichen Anforderungen

Lieferumfang:

- 1x Makita DTD 173 Akku Schlagschrauber
- 1x Makita BL 1850 B Akku 18 V 5,0 Ah
- 1x Makita Makpac Koffer
- 1x Universaleinlage
- ohne Ladegerät

Produktbeschreibung:

Der Akku-Schlagschrauber DTD173 von Makita überzeugt durch seine kompakte Bauweise, ein geringes Gewicht und ein beeindruckendes Anzugsdrehmoment von 180 Nm. Dieses vielseitige Werkzeug ist mit vier speziell entwickelten Schraubmodi ausgestattet, die den unterschiedlichen Anforderungen im Arbeitsalltag gerecht werden. Dabei handelt es sich um den Holzmodus, den Modus für Maschinenschrauben sowie zwei weitere T-Modi.  Der Holzmodus startet mit einer geringen Drehzahl und erhöht diese automatisch, sobald die Schraube greift, bis die maximale Geschwindigkeit erreicht ist. Der Schraubenmodus stoppt das Werkzeug im Linksdrehbetrieb automatisch, sobald Schrauben oder Muttern ausreichend gelöst wurden. Der T1-Modus ist ideal für schnelles Anziehen: Die Schraube wird mit hoher Drehzahl eingedreht, und der Schlagbetrieb setzt kurz darauf ein. Im T2-Modus wird ein Ausreißen des Gewindes verhindert, indem das Werkzeug die Drehzahl nach Beginn des Schlagbetriebs reduziert. Zur besseren Sichtbarkeit im Arbeitsbereich sorgt ein durchgehender Lichtring an der 1/4"-Werkzeugaufnahme. Eine neue Bit-Aufnahme mit reduziertem Widerstand erleichtert zudem die Installation und sorgt für einen festeren Halt der Bits. Mit diesen durchdachten Eigenschaften ist der Makita DTD173 der perfekte Begleiter für präzises und effizientes Arbeiten.

Technische Daten:

Hersteller: Makita
Herstellerbezeichnung: DTD173
Akkuspannung: 18 V
Bürstenloser Motor: Ja
Leerlaufdrehzahl: 0 - 1100 / 2100 / 3200 / 3600 min⁻¹
Drehmoment max.: 20 / 50 / 170 / 180 Nm
(Leerlauf-)Schlagzahl: 0 - 1100 / 2600 / 3600 / 3800 min⁻¹
Standardschrauben: M5 - M16
Maschinenschrauben: M4 - M8
Hochfeste Schrauben: M5 - M14
Aufnahme: 1/4 "
Schallleistungspegel (LWA): 108 dB(A)
Schalldruckpegel (LpA): 97 dB(A)
K-Wert Geräusch: 3 dB(A)
Vibrationswerte, Anziehen unter Maximalbelastung: 12,9 m/s² 
Vibrationsunsicherheitsfaktor (K-Wert), Anziehen unter Maximalbelastung: 1,5 m/s² 
Produktabmessung (L x B x H): 111 x 81 x 234 mm
Gewicht inkl. Akku: 1,2 - 1,5 kg


Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 28839390458

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 7 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
EEMD
Battle Creek, US
★★★★★ 3
Quality Assurance Lacking
Color: White, Size: 15.7 Inches
The first set I ordered was great; super easy to install, no issues. The second set I ordered the holes on the bottom of the shelves did not match up with the holes on the bar that secures the shelves to the wall so it was impossible to attach the shelves correctly. I'm still trying to figure out a solution. TO SUMMARIZE: First set perfect; second set unusable
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026
L
Verified Purchase
Lou Woodward
New York, US
★★★★★ 5
Worth it if you're a figure/doll collector!
Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch, Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch
I ordered these shelves to display my figures and dolls, and I love the way they look! I ordered 2 sets of the 4 pack in black with black hardware. After looking at reviews, I took the jump and bought them and don't regret it! TL;DR: Listing is accurate, don't use the paper measurement thingy, quality is what you'd expect for the price, doesn't come pre-drilled, easy enough to put together, over all worth it if you're looking for smaller, decent quality, decent price shelves especially if you display figures or dolls. 1. Listing: They are accurate to the measurements! They're only 5.5 inches deep, so there isn't much (if at all) any room for layering. They do feel small, but the listing is accurate!! Mine are paired next to each other to create a "longer" shelf. DO NOT use the paper measurement thingy. Another review mentioned it was un-even, and after holding it to mine, yeah, it was off. I'd highly recommend a stud finder, small leveler, and a white gel pen or marker to mark where to drill if you do. 2. Assembling & Mounting: The shelves didn't come with pre-drilled holes for the mounting options because it was easy enough to screw into. I will warn you that the small screws only came with a singular extra, so be careful about losing them in case it's the same for you... I'd highly recommend doing this on a FLAT surface. I stood the shelves on the side that would be flat against the wall and set the brackets against it. I put one screw in on each side (both brackets have 1 screw to hold them where I want) then I laid it on its top and tightened and added the other screw. I may have done more work than needed, but none of mine are leaning forward or backward super far. I used the "load bearing" mount simply because I like the look but if you intend to put books, I would do the "no drop" design and possibly get some other L brackets for more support since books can get heavy. PLAN WHERE YOU WANT THE BRACKETS if you intend on doing the "load bearing" design or adding any more brackets. 4. Quality: I kind of expected the wood to be a bit thicker/more sturdy feeling, but upon realizing they didn't come pre-drilled, it made more sense. THEY CHIP AND SCRATCH EASILY. If you're like me and don't really care as long as you cant see/don't notice it, then this isn't any concern but they may come damaged cause some of our mail couriers aren't the best. If you stick them in the corner like I did, please be careful about it slipping! I accidentally dropped the second one from a 21-inch TV stand after adding brackets, and the corner chipped (yes, I measured). The hardware is standard screw quality, and the brackets could be better. After reading the broken bracket reviews plus the price, I honestly wasn't expecting much, but they aren't too bad! You can always replace them with another one you like! 5. Overall: I'd say these are worth the price and I see why "customers usually keep this item"! They were easy enough to mount, even if you aren't the handiest man out there. I'd definitely recommend these if you're looking to display anime figures or dolls like I do! They're nice for adding vertical space without sticking out of the wall too much! Definitely good for smaller spaces! I'm very happy with this product and will more than likely return to this listing if I want some decent and affordable shelving! Thank you for reading my review, Im usually hesitant to buy online so I hope it helps you decide if you wanna buy these shelves as well! (Also, in case anyone is wondering the layout, the longest shelf will be 1, the middle length will be 2, the shortest length will be 3. It's the last image of the review!)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2025
I
Verified Purchase
Isabel Hernandez
Draper, US
★★★★★ 5
Stylish, Sturdy and Perfect for Small Spaces
Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch, Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch
Love these shelves! They are sturdy, easy to install, and perfect for organizing bathroom essentials. I used them above the toilet, and they fit perfectly in a small space. They helped me keep things organized while also adding a modern and decorative touch. Great quality and very functional. Highly recommend for anyone looking to upgrade their bathroom without taking up extra space!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026
A
Verified Purchase
Ash Wallace
Port Orchard, US
★★★★★ 5
Pirate ship shelves bathroom - perfect!
Color: C. Rustic Brown Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch, Color: C. Rustic Brown Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch
Love these shelves! I ordered them to match my "pirate ship" bathroom theme. They are solid and the wood is finished on all sides. My husband had no issue installing them. The only thing he found odd was the 15/64 drill bit it recommended. That's an odd size. The shelves look great and hold all on my stuff really well!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026
J
Verified Purchase
J23
Lake Worth, US
★★★★★ 4
Amazing little shelves
Color: G. Black Board & Gold Brackets, Number Of Shelves: 4, Size: 16-inch, Color: G. Black Board & Gold Brackets, Number Of Shelves: 4, Size: 16-inch
I love them! I use them in my nail room for clients and to hold my product. They are sturdy enough to put phones, keys, and their water bottles on. Being able to hang them in different ways is awesome for different aesthetics.4 different sizes. Easy to put together it came away with all the hardware you need. My only complaint is that the wood fills rough so not really able to dust them. I have to fix that
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026

recommand products