KYO-EI BIMECC HUB CENTRIC WHEEL SPACER x2 AUDI A4 / A5 / S5 MY '08 SP186

KYO-EI

SP186

HOLE: 5
_x000D_ PCD: 112
_x000D_ Hub shape: Hub No
_X000D_ inner diameter mm: 66.5
_x000D_ Thickness mm: 10
_x000D_ 2 Like
_x000D_ JAN code: 4965581 912004

Italian bolts that delivered many as genuine parts in Europe wheel manufacturers, nuts manufacturers "Bimekku"
_x000D_ confidence of major brands KyoHisashi industry has to offer.
_x000D_ high quality, hub with a spacer of the trust of the brand "Bimecc" boasts a high degree of accuracy. You can adjust the feet of imported cars to the ideal of the tread width (5 · 10 · 15 · 20mm). The spacer is also excellent fitting of the vehicle becomes a product specially designed for each car manufacturer. Is the lineup of the rich set up a dedicated spacer also to Porsche user.
_x000D_ ● price will be two one set. ● products, aluminum anodized finish.
_x000D_ ● 5mm spacer and the Porsche 7mm spacer does not have a hub.
_x000D_ ※ attachment, please mounted on top of the check the following notes.
_x000D_ ※ After mounting the Notes
_x000D_ ● spacers when mounting, it is recommended alignment adjustment to prevent uneven wear of the tire.
_x000D_ ● The spacer is imported vehicles only. Please do not install other than the specified models and domestic cars.
_x000D_ ● attachment of the spacer, you will always need a long bolt. Long bolts, will be sold separately. At the time of purchase, please order together.
_x000D_ ● Please extend the bolt according to the thickness of the spacer. In the case of the spacer thickness 5mm bolt Please also extended 5mm under neck length.
_x000D_ ● bolt, please use the current use has been that of the shape and the same type of bolt that is attached to the wheel bolts. Also please be attached to extend the under head length in accordance with the spacer thickness.
_x000D_ ● Always bolt of a screw in order to securely fix the wheel, please tighten more than 10mm. Please pay attention to the seat of
_x000D_ ● bolt. The seat of the wheel there is a 60 ° taper seat-spherical seat. Please choose a bolt adapted to the wheel to mount.
_x000D_ ● bolt can not be used when in contact with the brake system (ABS sensors, etc.) on the inside hub. Please check your sure that the bolt by turning the wheel by hand does not interfere with anything after installation.
_x000D_ ● the height of the hub is extremely low vehicle will exist depending on the model. If they can not be used for that can not be hub centric.
_x000D_ ● 5mm spacer and Porsche for 7mm spacer does not have a hub for out center. If the height of the hub on the vehicle side is sufficient, but can be installed, when the height of the hub is low, please use the hub with a spacer after 10mm.
_x000D_ ● attachment, for the failure and corruption when attached to the vehicle that is subjected error handling, or an illegal modification, will not be guaranteed at all.
_x000D_ ● There is a possibility that does not gap occurs in close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
_x000D_ ● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
_x000D_ ● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting. _x000D_ ● Please pay attention to the seat of the bolt. The seat of the wheel there is a 60 ° taper seat-spherical seat. Please choose a bolt adapted to the wheel to mount.
_x000D_ ● bolt can not be used when in contact with the brake system (ABS sensors, etc.) on the inside hub. Please check your sure that the bolt by turning the wheel by hand does not interfere with anything after installation.
_x000D_ ● the height of the hub is extremely low vehicle will exist depending on the model. If they can not be used for that can not be hub centric.
_x000D_ ● 5mm spacer and Porsche for 7mm spacer does not have a hub for out center. If the height of the hub on the vehicle side is sufficient, but can be installed, when the height of the hub is low, please use the hub with a spacer after 10mm.
_x000D_ ● attachment, for the failure and corruption when attached to the vehicle that is subjected error handling, or an illegal modification, will not be guaranteed at all.
_x000D_ ● There is a possibility that does not gap occurs in close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
_x000D_ ● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
_x000D_ ● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting. _x000D_ ● Please pay attention to the seat of the bolt. The seat of the wheel there is a 60 ° taper seat-spherical seat. Please choose a bolt adapted to the wheel to mount.
_x000D_ ● bolt can not be used when in contact with the brake system (ABS sensors, etc.) on the inside hub. Please check your sure that the bolt by turning the wheel by hand does not interfere with anything after installation.
_x000D_ ● the height of the hub is extremely low vehicle will exist depending on the model. If they can not be used for that can not be hub centric.
_x000D_ ● 5mm spacer and Porsche for 7mm spacer does not have a hub for out center. If the height of the hub on the vehicle side is sufficient, but can be installed, when the height of the hub is low, please use the hub with a spacer after 10mm.
_x000D_ ● attachment, for the failure and corruption when attached to the vehicle that is subjected error handling, or an illegal modification, will not be guaranteed at all.
_x000D_ ● There is a possibility that does not gap occurs in close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
_x000D_ ● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
_x000D_ ● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting. br> _x000D_ ● bolt can not be used when in contact with the brake system (ABS sensors, etc.) on the inside hub. Please check your sure that the bolt by turning the wheel by hand does not interfere with anything after installation.
_x000D_ ● the height of the hub is extremely low vehicle will exist depending on the model. If they can not be used for that can not be hub centric.
_x000D_ ● 5mm spacer and Porsche for 7mm spacer does not have a hub for out center. If the height of the hub on the vehicle side is sufficient, but can be installed, when the height of the hub is low, please use the hub with a spacer after 10mm.
_x000D_ ● attachment, for the failure and corruption when attached to the vehicle that is subjected error handling, or an illegal modification, will not be guaranteed at all.
_x000D_ ● There is a possibility that does not gap occurs in close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
_x000D_ ● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
_x000D_ ● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting. br> _x000D_ ● bolt can not be used when in contact with the brake system (ABS sensors, etc.) on the inside hub. Please check your sure that the bolt by turning the wheel by hand does not interfere with anything after installation.
_x000D_ ● the height of the hub is extremely low vehicle will exist depending on the model. If they can not be used for that can not be hub centric.
_x000D_ ● 5mm spacer and Porsche for 7mm spacer does not have a hub for out center. If the height of the hub on the vehicle side is sufficient, but can be installed, when the height of the hub is low, please use the hub with a spacer after 10mm.
_x000D_ ● attachment, for the failure and corruption when attached to the vehicle that is subjected error handling, or an illegal modification, will not be guaranteed at all.
_x000D_ ● There is a possibility that does not gap occurs in close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
_x000D_ ● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
_x000D_ ● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting. _x000D_ ● The height of the hub is extremely low vehicle will exist depending on the model. If they can not be used for that can not be hub centric.
_x000D_ ● 5mm spacer and Porsche for 7mm spacer does not have a hub for out center. If the height of the hub on the vehicle side is sufficient, but can be installed, when the height of the hub is low, please use the hub with a spacer after 10mm.
_x000D_ ● attachment, for the failure and corruption when attached to the vehicle that is subjected error handling, or an illegal modification, will not be guaranteed at all.
_x000D_ ● There is a possibility that does not gap occurs in close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
_x000D_ ● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
_x000D_ ● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting. _x000D_ ● The height of the hub is extremely low vehicle will exist depending on the model. If they can not be used for that can not be hub centric.
_x000D_ ● 5mm spacer and Porsche for 7mm spacer does not have a hub for out center. If the height of the hub on the vehicle side is sufficient, but can be installed, when the height of the hub is low, please use the hub with a spacer after 10mm.
_x000D_ ● attachment, for the failure and corruption when attached to the vehicle that is subjected error handling, or an illegal modification, will not be guaranteed at all.
_x000D_ ● There is a possibility that does not gap occurs in close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
_x000D_ ● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
_x000D_ ● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting. _X000D_ ● may not gap occurs close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
_x000D_ ● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
_x000D_ ● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting. _X000D_ ● may not gap occurs close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
_x000D_ ● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
_x000D_ ● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting.

Images are for illustration purpose only. Actual product may vary.