KYO-EI BIMECC HUB CENTRIC WHEEL SPACER x2 MERCEDES BENZ SP5 5112M

KYO-EI

SP5 5112M

HOLE: 5
_x000D_ PCD: 112
_x000D_ Hub shape: Hub No
_X000D_ inner diameter mm: 66.5
_x000D_ Thickness mm: 5
_x000D_ 2 Like
_x000D_ JAN code: 4965581 910901

Italian bolts that delivered many as genuine parts in Europe wheel manufacturers, nuts manufacturers "Bimekku"
confidence of major brands KyoHisashi industry has to offer.
high quality, hub with a spacer of the trust of the brand "Bimecc" boasts a high degree of accuracy. You can adjust the feet of imported cars to the ideal of the tread width (5 · 10 · 15 · 20mm). The spacer is also excellent fitting of the vehicle becomes a product specially designed for each car manufacturer. Is the lineup of the rich set up a dedicated spacer also to Porsche user.
● price will be two one set. ● products, aluminum anodized finish.
● 5mm spacer and the Porsche 7mm spacer does not have a hub.
※ attachment, please mounted on top of the check the following notes.
※ SP110AL: E class (W221 / S211 / W212 / S212) SL class (R230 / R231) CLS class (W219 / W218) CL class (C216) S class (W221)
above, vehicle type, front It will not be mounted. However, the rear is wearing is possible.
※ above, models the front of the vehicle hub height is equal to or greater than 10mm, you may not enter interfere with the hub inner diameter of the spacer.
※ C surface C3 following the wheel of the wheel, please note that can not be installed.
※ SP110 Steel, it will be temporarily out of stock, please understand.
※ After mounting the Notes
● spacers when mounting, it is recommended alignment adjustment to prevent uneven wear of the tire.
● The spacer is imported vehicles only. Please do not install other than the specified models and domestic cars.
● Installation of the spacer is, you will always need a long bolt. Long bolts, will be sold separately. At the time of purchase, please order together.
● Please extend the bolt according to the thickness of the spacer. In the case of the spacer thickness 5mm bolt Please also extended 5mm under neck length.
● bolt, please use the current bolt that is attached to the wheel that is being used shape and the same type of bolt. Also please be attached to extend the under head length in accordance with the spacer thickness.
● Always bolt of a screw in order to securely fix the wheel, please tighten more than 10mm.
● Please pay attention to the seat of the bolt. The seat of the wheel there is a 60 ° taper seat-spherical seat. Please choose a bolt adapted to the wheel to mount.
● bolt can not be used when in contact with the brake system (ABS sensors, etc.) on the inside hub. Please check your sure that the bolt by turning the wheel by hand does not interfere with anything after installation.
● The height of the hub is extremely low vehicle will exist depending on the model. If they can not be used for that can not be hub centric.
● 5mm spacer and Porsche for 7mm spacer does not have a hub for out center. If the height of the hub on the vehicle side is sufficient, but can be installed, when the height of the hub is low, please use the hub with a spacer after 10mm.
● attachment, for the failure and corruption when attached to the vehicle that performs an error on the handling or improper modification, does not guarantee anything.
● There is a possibility that does not gap occurs in close contact with the vehicle and the spacer due to individual differences and variations of the vehicle. Please confirm that there is no gap at the time of mounting.
● Please check the status of each of the mounting surface was fitted with a spacer performs a provisional set of hub hole of the vehicle side of the hub and the wheel side of the spacer. May not enter smoothly into time, or have backlash after mounting, please never use if there is a gap in the mounting surface.
● There is a case mounted in the dirt of the vehicle hub and the wheel is difficult. Please refer to the attachment from dropping enough dirt with a brush or the like before mounting.

Images are for illustration purpose only. Actual product may vary.