Pay in installments of $18505.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 3 - Aug 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Dana Dolly Portable Dolly System with Universal Track Ends16 Custom Dolly Track Wheels Soft Polyurethane Track Wheels ABEC 7 Rated Precision Bearings Wheel Trucks Swivel for Curved Track For 1. 5 to 1. 9" O. D. Pipe Supports 100 lb of Camera & Accessories Center Support Includes 75 & 100mm Bowl Adapaters 1 4" 20 & 3 8" 16 Accessory Holes Designed & Made in The USA The Dana Dolly Portable Dolly System with universal track ends is a heavy duty camera dolly platform that rides on 16 custom modified soft
- 16 Custom Dolly Track Wheels
- Soft Polyurethane Track Wheels
- ABEC-7-Rated Precision Bearings
- Wheel Trucks Swivel for Curved Track
- For 1.5 to 1.9" O.D. Pipe
- Supports 100 lb of Camera & Accessories
- Center Support
- Includes 75 & 100mm Bowl Adapaters
- 1/4"-20 & 3/8"-16 Accessory Holes
- Designed & Made in The USA
The Dana Dolly Portable Dolly System with universal track ends is a heavy duty camera dolly platform that rides on 16 custom modified soft polyurethane wheels that resist flat spotting and use ABEC-7-rated precision bearings providing you with extremely smooth dolly shots. The wheel trucks swivel, allowing the dolly to ride on available straight or curved track, which you must source separately. The manufacturer recommends using standard speed rail or Schedule 80 aluminum pipe of compatible size. The dolly includes two universal track ends, which accept pipe from 1.5" up to 1.9" O.D., and fit into available standard Junior stand receivers or 5/8" Baby pins.. A center support is included for long track runs or when using heavy cameras.
The dolly platform is machined from aluminum and features a standard Mitchell mount including a 2.75" center hole with a machined key way. The included 75mm and 100mm bowl adapters allow you to mount fluid heads with standard 75mm or 100mm leveling balls. The platform incorporates one 3/8" through hole, one 1/4"-20 threaded hole, and one 3/8"-16 threaded hole on each side of the dolly platform for a total of 6 accessory mounting holes. The Dana dolly is designed and manufactured in the USA.
- Custom Machined Track Wheels
- The key to the Dana dolly's smooth ride are the 16 custom machined track wheels.
- The wheels are custom made soft, then turned down to be round within 1/1000 of an inch to eliminate the bounce that normal skateboard wheels suffer from.
- You can park the dolly with 100 pounds of camera and accessories on the track at 100° F for an hour without the wheels flat spotting.
- Another benefit from the machining the wheels is reduced squeak during use.
- The wheels are custom modified 16 at a time on a special machine, providing uniformity.
- Wheel Trucks
-
- The wheel trucks can swivel on the dolly, which allows it to ride on straight and curved track.
- A felt washer separates the dolly platform from the wheel trucks, helping to reduce noise.
- The included T-Tool features a 1/2, 9/16, and 3/8" ends.
- It allows you to tighten the wheel trucks using the 9/16th end to suit your taste.
- Mitchell Mount
- The Mitchell mount features an elongated key way, allowing you to use non standard adapters.
- Track Supports
- Track supports fit into available standard Junior stand receivers or 5/8" Baby pin, although Dana Dolly recommends the use of available beefy baby stands at a minimum and to avoid thin walled aluminum stands
| Material of Construction | Dolly Platform Machined 6061 Aluminum Track Wheels 16 x Soft Polyurethane Bearings ABEC-7 rated precision bearings |
| Load Capacity | 100 lb (45.4 kg) |
| Head Fitting | Incorporated: Mitchell Mount With Included Adapters: 75/100mm Available Adpaters: 150mm |
| Accessory Mounting | 2 x 3/8" Through Hole 2 x 1/4"-20 Threaded 2 x 3/8"-16 Threaded |
| Track Format | Outer Diameter: 1.5 to 1.9" (3.8 to 4.8 cm) Truck Distance: Just under 12" (30.5 cm) on center |
| Temperature | Max: 100°F (37.8°C) |
| Dimensions (L x W) | 14 x 10" (35.6 x 25.4 cm) |
| Weight | 13 lb (5.9 kg) |
| Packaging Info | |
|---|---|
| Package Weight | 25.8 lb |
| Box Dimensions (LxWxH) | 20.7 x 20.4 x 9.2" |
- 2 x Universal Track Ends
- Center Support
- 75mm Bowl Adapter
- 100mm Bowl Adapter
- 3" Washer
- T-Tool
- Limited 1-Year Warranty
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy