Ronseal Interior Varnish Teak Satin 250ml (36827)

Ronseal Interior Varnish Teak Satin 250ml (36827)It's easy to use just apply with a brush Dries in just 20 minutes Diamond Hard protection 16 square metres covered per Litre Features Specifications Our Interior Varnish gives great protection against knocks, scuffs and scratches. It's suitable for use on high wear areas such as wooden dining tables and skirting. It gives wood a richer colour and comes in gloss, satin or matt finishes. We have traditional wood colours or softer tones, if you want

• It's easy to use - just apply with a brush
• Dries in just 20 minutes 
• Diamond Hard protection
• 16 square metres covered per Litre

• Features
• Specifications

• Our Interior Varnish gives great protection against knocks, scuffs and scratches.

  It's suitable for use on high wear areas such as wooden dining tables and skirting. It gives wood a richer colour and comes in gloss, satin or matt finishes.  

  We have traditional wood colours or softer tones, if you want something different.

• 250ml
  
  RONSEAL INTERIOR VARNISH
  
  Ronseal Interior Varnish provides a beautiful, natural finish for doors, skirting, tables, furniture and other wood inside your home.
  Diamond Hard protection provides superior resistance against scratches, knocks and scuffs. It is touch dry in 20 minutes and ready to re-coat in 1 hour.
  
  BEFORE YOU START
  Make sure the room is warm and well ventilated. Open a window or a door if you need to.
  
  Prep - Bare Wood: Ensure all surfaces are free from wax, grease and oil by wiping with white spirit on a damp cloth. Give it a quick sand, make sure you wear a face mask to do this. Then get rid of any dust by wiping with a damp cloth. Leave to dry thoroughly before varnishing.
  
  Prep - Previously Varnished Wood: Ensure all surfaces are free from wax, grease and oil by wiping with white spirit on a damp cloth. Remove any loose, flaking or peeling coatings. Give it a good sand, making sure that you are wearing a face mask. Then get rid of any dust by wiping down with a damp cloth. Leave to dry thoroughly before varnishing.
  
  Using Your Interior Varnish
  Give the tin a good stir before you use it. Apply an even layer of varnish in the direction of the wood grain. Put on 2-3 coats leaving 1 hour between coats.
  Before applying the final coat, give the wood a quick sand down and wipe with a damp cloth.
  
  Usage Areas: All interior wood.
  Compatibility: Bare or previously varnished wood. Not suitable for painted wood.
  Clean Up: Clean all brushes in warm, soapy water.