CNC Stage 2 High Pressure Oil Pump - HPOP - 1994-2003 Ford F-Series

CNC Stage 2 High Pressure Oil Pump - HPOP - 1994-2003 Ford F-SeriesCNC Fabrication Stage 2 High Pressure Oil Pump The CNC Fabrication Stage 2 High Pressure Oil Pump flows 30% more than a brand new Bosch 99. 5 03 pump, providing enough volume to support 250 100 hybrid injectors. While it can handle 250 200 injectors, its important to note that it may not be able to keep up with a "hot race" tune, as performance can vary based on the injector builder's specifications. This pump is most effective for 230 250cc hybrid

CNC Fabrication Stage 2 High Pressure Oil Pump

The CNC Fabrication Stage 2 High Pressure Oil Pump flows 30% more than a brand new Bosch 99.5-03 pump, providing enough volume to support 250/100 hybrid injectors. While it can handle 250/200 injectors, it’s important to note that it may not be able to keep up with a "hot/race" tune, as performance can vary based on the injector builder's specifications.

This pump is most effective for 230-250cc hybrid injectors. Anything larger will likely require a twin pump setup. For those requiring a twin pump, CNC Fabrication also offers a twin kit from Full Force Diesel Performance.

Key Features:

• New gasket included

• Steel thread inserts: Ensures threads won't strip out.

• Upgraded internals: Provides more flow for better performance.

• New Viton o-rings: Allows reuse of your existing fittings.

• Flow Bench Tested: Every pump is tested to ensure it meets performance standards.

• Test Flow Result Sheet: Includes a flow test report for each pump.

This pump is recommended for 230-250cc or smaller injectors. For anything larger, a twin pump setup is required.

Applications:

• 1994-1995 7.3L Powerstroke

• 1996-1997 7.3L Powerstroke

• 1999-2003 7.3L Powerstroke

Core Return Policy

You have two options when obtaining this pump:

1. Send in your old pump (no charge) or

2. Receive the pump immediately with a core charge, refundable upon returning your old pump.

• Core Requirements:

  • 94.5-95 HPOP: Must be the correct housing to receive full core credit.

  • 96-03 HPOP without the check valve: Will be accepted, but with a 25% reduction in core refund.

Core Return Policy:

• You have 45 days from receiving the pump to return your core for a full refund.

• Refund Reductions:

  • After 45 days, there will be a 10% reduction in the core refund.

  • After 90 days, there will be a 50% reduction in the core refund, unless prior arrangements are made with CNC Fabrication.

If you expect to return the core later than 45 or 90 days, please email [email protected] to inform us and update our records.