LDO Kit Voron Trident 300 RevD

LDO Kit Voron Trident 300 RevDLDO Voron Trident Features New for June 2024: (Rev D) now includes Raspberry Pi 4B, LDO Leviathan Board, LDO Nitehawk toolhead board, Bondtech IGDA, pre installed bed magnet and included printed parts for LDO specific mods (z endstop & other misc. parts). E3D Revo High Flow Hotend with 60W heater. Raspberry PI 4B with included heatsink. Clockwork 2 motor included. LDO bed heater Edge to edge heating pre installed and wired ready to go! Stainless Steel

LDO Voron Trident Features

• New for June 2024: (Rev D) now includes Raspberry Pi 4B, LDO Leviathan Board, LDO Nitehawk toolhead board, Bondtech IGDA, pre-installed bed magnet and included printed parts for LDO-specific mods (z endstop & other misc. parts).
• E3D Revo High-Flow Hotend with 60W heater.
• Raspberry PI 4B with included heatsink.
• Clockwork 2 motor included.
• LDO bed heater- Edge-to-edge heating pre-installed and wired ready to go!
• Stainless Steel Linear Rails - No more worrying about rusty rails. Remember to properly lubricate your linear rails!
• NiteHawk USB toolhead PCB- this toolhead simplifies wiring by moving to 1 usb cable (included) from the toolhead to the MCU. it also adds many other upgrades like build int accelerometer and multiple fan connections.
• Brass Heatset Insert Tool - We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease!
• Input Shaper Tool- We threw in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free.
• Pre-cut & Pre-wired - Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See instructions in LDO's detailed wiring guide.
• Touch Screen Display - We've replaced the standard 12864 LCD with an IPS Capacitive Touch Display to use with KlipperScreen.
• LED Lighting - Bring lighting to your Voron with included LED strips and all necessary wiring!
• Nevermore Filter - We include parts for an optional internal circulation filter: the Nevermore Micro V5 by 0ndsk4 (carbon pellets not included due to shipping restrictions).
• Klicky Mod - Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optional Klicky mod by jlas1.
• Small Tools - We include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flat head screwdriver that is useful in a surprising number of situations.
• 2mm Drill Bit - Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.

What you need to source

• Printed Parts Guide
• Wiring Guide