1/10 Scale Full-Width Front Bumper with Trail Bar for Traxxas TRX4 Sport

1/10 Scale Full-Width Front Bumper with Trail Bar for Traxxas TRX4 SportFull Size Steel, Welded Front Bumper w Trail Bar For The TRX4 Sport *Note: trimming required for after market inner fenders. Specifications: 190mm wide Bumper Top Plate sites approx. 20mm above the top of the frame rail. **REQUIRES Trimming of body for fitment. Bumper is not made to fit a winch. Mounts using existing holes in frame does not mount like stock plastic bumper(s) (Longer hardware recommended hardware not included See Optional Bumper

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.