SKU: 59041671024

Kenji Togashi Shirogami #2 Mizu-Honyaki Ripple 240mm Kiritsuke Gyuto with Polished Flowing Blue River Acrylic Handle

$764.55 $849.50
Save 10%
No.2 Bestseller on prudentsource.com >

Pay in installments of $212.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 6 - Aug 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Kenji Togashi Shirogami #2 Mizu-Honyaki Ripple 240mm Kiritsuke Gyuto with Polished Flowing Blue River Acrylic HandleRare mizu honyaki kiritsuke gyuto with ripple hamon, hand forged by legendary Sakai Honyaki master Kenji Togashi with Shirogami #2 steel and sharpened by renowned Sakai sharpener Hirotsugu Tosa. Very few bladesmiths in Japan have the skill to make mizu honyaki blades, not to mention the exquisite ripple hamon. Master Togashi is one of them. This knife is paired with a flowing river patterned polished acrylic handle that is beautifully fitted with

Rare mizu-honyaki kiritsuke-gyuto with ripple hamon, hand-forged by legendary Sakai Honyaki master Kenji Togashi with Shirogami #2 steel and sharpened by renowned Sakai sharpener Hirotsugu Tosa. Very few bladesmiths in Japan have the skill to make mizu-honyaki blades, not to mention the exquisite ripple hamon. Master Togashi is one of them. This knife is paired with a flowing-river patterned polished acrylic handle that is beautifully fitted with mosaic pin decorations and polished steel bolster and bottom cap. Only one available

Spec:

  • Origin (Made in): Sakai, Osaka Prefecture, Japan
  • Craftsman: Mr. Kenji Togashi
  • Sharpener: Mr. Hirotsugu Tosa
  • Distributed by: Sakai Takayuki
  • Knife Type: Kiritsuke Gyuto
  • Blade
    • Construction: Mizu-Honyaki
    • Grind: Double-edged Blade (50/50 Grind)
    • Hagane: Shirogami #2 (White #2)
    • Hardness: 63-64 HRC
    • Hand-forged, hand-grinded, hand-sharpened
  • Blade Finishes: Ripple
  • Blade Length: 240mm (9.4")
  • Blade Height (at heel): 51mm
  • Spine Thickness
    • Above heel: 2.4mm
    • Middle: 2.1mm
  • Handle
    • Premium Custom Handle
    • Material: Polished Acrylic
    • Color: Flowing Blue River
    • Bolster / Bottom Cap: Stainless Steel
    • Decoration: Mosaic Pins
    • Length: 125mm
  • Overall Length: 374mm
  • Weight: 305g (10.76oz)
  • Engraved Mark: In Japanese Kanji "Shirogami #2 Togashi Made" (白二鋼 冨樫作)

About Kenji Togashi 富樫 憲治

Master Kenji Togashi is a legendary blacksmith in Sakai, and one of the few blacksmiths in Japan with the skills of forging quality honyaki blades. Since the start of his bladesmithing career in 1966, master Togashi has received numerous accolades including Dentō-Kugeishi. Master Togashi is renowned for his mastery of this now endangered blacksmithing skill. Master Togashi makes blades out of his own workshop in Sakai, along with his three sons. He makes blades mainly for Sakai Takayuki.

About Hirotsugu Tosa 土佐 廣次

Born in 1948, Mr. Hirotsugu Tosa started his sharpener apprenticeship under his father at age 19. Mr. Tosa is renowned for his mirror finishing works on Aogami and Shirogami blades, as well as his exquisite edge grinding and polishing skills. He was recognised as Dentō-Kugeishi in 1996 for his artisan craftsmanship. Mr Tosa is the inhouse master of mirror polishing at Sakai Takayuki.

About Mizu-Honyaki 水本焼

Mizu-Honyaki is the highest level of Japanese knife making, involving a differential heat treatment achieved by applying clay mud on spine and hira of the blade before heating and water quenching. Very few blacksmiths have the skills of making quality mizu-honyaki, and the failure rate is very high as any tiny crack during the heat treatment forfeits the entire blade. A fine mizu-honyaki is always costly due to the scarcity of blacksmiths and high failure rate.

Care:

Shirogami #2 (white #2) steel is one of the most popular types of high carbon steel found in Japanese kitchen knives (Wa Knives). It is not stainless, therefore you must wipe your knife dry after each use. Patina will develop over time. Rust may develop if left in prolonged contact with water or acidic food. Use a rust eraser to clean if rusts develop. Avoid cutting into bones, frozen foods, hard fruit pits.

Cutting Surface:

Recommended cutting surface: wood, rubberized boards and high-end composites, and quality plastics such as polyethene make acceptable cutting surfaces, and will help protect and prolong knife’s edge. AVOID glass, metal, countertops, and other rigid, non-forgiving surfaces.

Sharpening:

We recommend sharpening all quality Japanese knives on whetstones, as we believe they yield the best results for your knives. 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 59041671024

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mona T.
Lexington, US
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly. while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
K
Verified Purchase
karine
Massapequa, US
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
ralversity
Lowell, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Lowell, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
M
Verified Purchase
Mike
Grantham, US
★★★★★ 5
Works For Desired Use
Color: Black, Size: 4 Panel-136‘’W-Round Pad
I recently purchased the Room Divider 6FT Folding Privacy Screens, 4 Panel Partition Room Dividers, and I must say, it has transformed the way I use my living space. The four-panel design is both elegant and functional, providing instant privacy without feeling bulky or overwhelming in my room. Setting it up was a breeze; the folding mechanism is smooth, allowing me to adjust the configuration as needed—straight, angled, or zigzag. I particularly appreciate the sturdy build; the panels feel solid yet lightweight, making it easy to move around when I want to reconfigure my space. Aesthetically, it’s a great addition. The neutral finish blends well with my décor, and the simple design doesn’t draw too much attention while still offering a sense of separation. It’s perfect for creating a temporary office corner, dividing a studio apartment, or even using it as a backdrop for online meetings. If I had to point out a minor downside, it would be that the divider isn’t completely soundproof—so conversations can still carry through—but for visual privacy and space management, it’s excellent. Overall, I’m extremely satisfied and would recommend it to anyone looking for a versatile and stylish room divider.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026

recommand products

Honda CRF1000L Africa Twin
180.97
White Cotton Voile Embroidery Fabric with Delicate Floral Motif – 110 cm Width-D21549
49.88
Honda Genuine Parts Number 28500RJB004 SOLENOID ASSEMBLY
2240.50
Pig Spit PSO Spit Original 9 oz - Black Vinyl for Motors, Transmissions & Trim
23.42
Sky Blue Pure Linen Fabric with Smooth Textured Finish, 60 Lea, 150 cm Width-D21651
46.88