Bandsaw Blade - 105" x 1/2" x .032" x 3 TPI - Alternate Set

Bandsaw Blade - 105" x 1/2" x .032" x 3 TPI - Alternate SetLow tension, Swedish silicon steel bandsaw blades from Timber Wolf will outlast your old carbon steel blades. Your bandsaw will cut better and faster with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood cutting blade was meant to be. Alternate Set tooth pattern means a great finish fast. The round design of the gullet eliminates any work hardening

Low tension, Swedish silicon steel bandsaw blades from Timber Wolf® will outlast your old carbon steel blades. Your bandsaw will cut better and faster with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood-cutting blade was meant to be. Alternate Set tooth pattern means a great finish fast. The round design of the gullet eliminates any work hardening zones. This blade can make a 2-1/2"-radius cut and is a favorite of woodturners for cutting smaller radius bowl blanks, vases, etc. It is typically used for cutting green or exotic woods from 6" to 12" in height, as the 0.032" kerf opens up a little wider to remove saw dust and prevent the blade from being pinched.

Features:

• Ideal for roughing or milling green wood/logs or exotic woods
• Alternate Series blades utilize the unique geometry of our PC gullet
• Their performance is excellent if the thickness of your material exceeds 6” to 8”
• High silicon, low carbon steel
• Runs cooler and lasts longer
• Runs under low tension which requires less horsepower

Specifications:

• Blade Length: 105"
• Blade Width: 1/2"
• Blade Thickness: 0.032"
• Teeth Per Inch: 3 TPI
• Tooth Design: Alternate Set
• Kerf: .056"
• Tooth Hook Angle: 6.5°
• Tooth Set Pattern: Alternate Set
• Radius of Cut: 2-1/2"
• Depth of Cut Range (Kiln Dried and Green Hardwood and Softwood): 3” – 12”

What's Included:

• (1) Timber Wolf® - Bandsaw Blade - 105" x 1/2" x 3 TPI - Alternate Set

Notes:

• These blades are not meant to be used on any 3-wheel saw or any saws with less than a 90" blade length or wheel diameter less than 14".