SKU: 66055558402

V1M: (UTB18) Mini Comp Chassis

Sale price$77.36 Regular price$85.95
Save 10%

Pay in installments of $21.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

V1M: (UTB18) Mini Comp ChassisFits: Axial 1 18th Scale UTB18 Crawler Buggy Battery: You can use the stock battery on the rear links but it is kid of tight and bulky. To optimize your performance, we recommend the Helios 600MAH 2C Lipo (https: heliosrc. com 2s 600 mah 45c lipo ) mounted either on a front axle battery mount or rear upper link plate. The Helios battery will need to have the lead swapped to an IC2 Connector or change the connector on the stock upgraded ESC.

Fits: Axial 1/18th Scale UTB18 Crawler Buggy

Battery: You can use the stock battery on the rear links but it is kid of tight and bulky. To optimize your performance, we recommend the Helios 600MAH 2C Lipo (https://heliosrc.com/2s-600-mah-45c-lipo/) mounted either on a front axle battery mount or rear upper link plate. The Helios battery will need to have the lead swapped to an IC2 Connector or change the connector on the stock/upgraded ESC.

Modifications Required: Direct Bolt on, No Modification required.

You will recieve: 2 - CF Chassis Plates, 2 - CF Cab Plates, 4 - Aluminum Braces 4 - M3x20, 4 - M3x16, 4 - M3 Nylock, 8 - M2.5x10, 4 - M2.5x20, 2 - M2.5 Nylock, 8 - Zip Tie

The V1M (UTB19) Comp Chassis has been reenginered to directly bolt the driveline and components from an AXIAL UTB18 on to this Narrow chassis to allow for a more optimal proformance orented chassis for the WRCCA Mini Class Comp Crawler.

Chassis Features: The chassis and cab have been cut from 2mm Carbo Fiber sheets with a nice matt finsh. Simlia to the old Losi MRC, we have kept the base of the chassis very narrow to allow you to navigate the tight terain without bottoming out on a wide chassis. Upper link adjustment offer a range of antisquat and anti dive adjustments with 100% being your middle range allowing yout to tune your rig to match your driveing style. (These values were calculated with 1.9 Rover Tires, Front Brass Knuckles Weight Covers and rear brass Portal Covers with the stock battery mounted on top of the rear upper links and ESC Mounted to the roof of the cab.)

The basic setup will help you take the UTB18 make the most of the stock setup. All COG and weight distribution has been calculated with the stock eletronics and battery. Changing to smaller and lighter components and battery will increase your proformance. Some Adjustments may be needed.

Shocks: If using the stock Capra Shocks, the recomended setup is: Front half droop with rubber bump stop replaced with an O-Ring. Rear full droop with the rubber stps replace with an O-Ring and a pen spring under the piston inside the shock.

Rear Lower Links: Remove your rear lower links and tape them together evenly, Measure a spot about 1 inch from the base of the rod end and give them a slight bend in a vice to make them high clearance links. Alternativly, you could replace your lower links with small diameter brass links from D-Links.

Body Side Pannels: You will recieve one set of 3D printed side panels. It is recomended that you use these as a template to trace and cut pannels out of .03 lexan or even a used pop bottle to help customize your build.

The Hood Roof and Tail Plate: These parts are a solid 3D printed piece. You can substitute the prints for Aluminum Spacers and Lexan panels if you like. We opted to print these components to save you money on your conversion. Aluminum Spacers can usually be found in e-bay or Amazon for around $2-3 each for low quantities.

Aluminum Cross Brace Note: The kit includes four braces, If using a 380 size motor, you will only use three braces as the motor will interfere with the brace next to the hood. With a 380 motor, use the supplied 2.5m Nylock's in place of the Brace. If you are using a compact revolver type motor, you can use all 4 braces.

Reccomended setup: Use an after market motor and compact ESC like the Furitek system. This will allow you to reduce the ESC size and mount it on the fron Upper link plate that is included. You should also use a smaller battery mounted on the rear upper link plate. This will keep your COG low and better distribut the weight on the rig.

3D Printed Parts: You can select your desired color or save a few dollors by selecting the self print option. (Print files are free with every purchas reguardless of choice).

You Will Need: One small velcro strap to secure the battery to the rear upper link Battery Tray or heavy duty velcro.

Comp UTB18 ESC Motor Combo - https://furitek.com/products/fur-2267?_pos=1&_sid=... ... however, I'm a big fan of Holms hobbies when they start to make 380 motors again.

Wheels in Photo: Brazen Scale RC Hurricane Wheels (Delrin) - https://www.brazinscalerc.com/wheels/19-hurricanes
The beedlock rings and hubs are a 3D Printed design I did to suit my style. Those files will be included in the down-load pack. You will need 2mm hardware to secure the rings and hubs to the wheels.

////// Files will be available at the download link after pre-order is closed. all Pre-Orders will recieve and e-mail with the files once they are finalized. //////


WRCCA 2023 Rules: 2.4 - Mini Class:

▪ 2.4.1 - Vehicle wheelbase is limited to a maximum of 9”/228.6mm.
▪ 2.4.2 - Vehicle track width is limited to a maximum of 9”/228.6mm.
▪ 2.4.3 - Wheel/ rim is limited to 1.9”/48.26mm or smaller at the bead surface. Wheels may be modified provided that the tire bead surface does not exceed 1.9”/48.26mm in diameter. With a tire mounted no exterior component of the wheel including but not limited to the bead lock ring shall exceed 2.2”/55.88mm
▪ 2.4.4 - Tires may be modified from other size tires using only pliable rubber but must not exceed a total uncompressed outer diameter of 4.95”/125.73mm.
▪ 2.4.5 - Vehicles are limited to 2-wheel steering on the front axle only.
▪ 2.4.6 - Vehicles are limited to the use of 2 channels radio control (one for steering & one for throttle) only. Neither channel can be used to perform more than one function. Radio systems with more than 2 channels are allowed but only 2 channels can be used to control the vehicle.
▪ 2.4.7 - Vehicles are limited to 1 ESC & 1 servo only.
 2.4.8 - Vehicles are limited to 1 motor powering both of the axles.
 2.4.9 - No driver controlled devices, other than steering and throttle control, will be allowed. Independent throttle control to the front or rear axles (“burn” or “dig”),(winching down the axles, and forced articulation are not allowed in this class.)
▪ 2.4.10 - Vehicle body/ bodiless measurements must be greater than or equal to 6.75"/171.54mm overall length, 2.5"/63.5mm overall width and 2.75"/69.85mm overall height.
▪ 2.4.11 - Motor must be chassis mounted. Motor mount cannot be part of or directly coupled to an axle.


Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.


 

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

 

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ [email protected] or PM us @ Spare-Time Hobbies on Face Book.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 66055558402

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
Denyce Schoemehl
West Palm Beach, US
★★★★★ 5
Got it fast and works great
Very nice looking and works fast!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 9, 2026
A
Verified Purchase
Amazon Customer
Charlottesville, US
★★★★★ 5
So easy
I love it
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2026
K
Verified Purchase
k. oakes
Louisville, US
★★★★★ 4
Nice tool, but with a 4 year life span.
I bought this on Nov. 2020, after hand surgery left me temporarily unable to do simple yet necessary tasks- like opening a wine bottle. 🤪 It's compact, nicely designed, and reliable. I kept it plugged in all the time with no issues. The only negative so far is the blue light which stays on whenever the unit is in the base, fully charged or not. (Not a fan of the many small yet bright lights from all appliances! Placing a Talking Yoda figurine in front of it blocked enough of the light to satisfy me). I found it easy to use and appreciated the foil cutter. Worked well on all types of corks. Flash forward to spring 2024... Despite the constant charging, the corkscrew dies at maybe a half inch into the cork. Just slows down and dies. Having read earlier reviews, I may try to crack it open and replace the battery. But ultimately, having regained my hand strength back, I'm more likely to go back to an old fashioned, reliable, hand operated corkscrew and celebrate the loss of weird lights and needed electricity. Conclusion: unless you are recovering from hand surgery, just get a good quality non- electric corkscrew and use it for 75 years (optimistically). Best deal ever. And you can take it camping too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 2, 2024
D
Verified Purchase
Divya
Natrona Heights, US
★★★★★ 5
Game Changer for Wine Lovers
Color: 8-in-1 Silver, Size: Rechargeable
Circle Joy Electric Wine Bottle Opener and I’m honestly really impressed. Setup was super simple, and it works exactly as advertised—just place it on the bottle, press a button, and the cork comes out smoothly in seconds. No struggling, no broken corks, and no mess. It makes opening wine feel effortless and a lot more enjoyable. I also love the sleek design—it looks modern and feels sturdy, not cheap. If you have the set with accessories, the extras like the foil cutter and pourer are a nice bonus and actually useful. Overall, this is a great little gadget, especially if you open wine often or just want something convenient and easy to use. Definitely a solid buy or even a nice gift idea.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
B
Verified Purchase
Bruce Dresser
Chelsea, US
★★★★★ 5
Great electric corkscrew
Color: 7-in-1 Silver, Size: Rechargeable
The electric corkscrew works perfectly. It makes opening wine bottles so easy. I haven’t had to recharge the device for weeks!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026

recommand products