SKU: 70352200657

PRO-TECH CHAMFER 1/2'SHANK KP904

Sale price$163.77 Regular price$181.97
Save 10%

Pay in installments of $45.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 9 - Aug 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

PRO-TECH CHAMFER 1/2'SHANK KP904Edge profile router bits Bevel profile Carbide Tipped This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball bearing guide. It is ideal for bevelling and decorative edges. This router bit is also used for producing a 45 edge for mitres, especially where extreme accuracy is required. A great product for making boxes. This router bas a 12. 7mm shank (shaft) that will fit most large routers with the correct collet. Please

Edge profile router bits
Bevel profile

Carbide Tipped

This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball bearing guide. It is ideal for bevelling and decorative edges. This router bit is also used for producing a 45 edge for mitres, especially where extreme accuracy is required. A great product for making boxes.

This router bas a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.

PRO-TECH router bits are manufactured in Taiwan.

 

consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection clean and scratch free
  • Hearing protection quality earmuffs
  • Dust masks discard old and dirty masks
  • Gloves for easy handling of material and hand protection
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask

To use router bits safely (and to get the best results from your router), the router bits need to be installed properly into the router's collet. Improper installation of your bits can cause excessive chatter and could increase the likelihood that the bits will break when in use. 

Clean and sharp

First of all, before beginning any routing operation, check your bits to make sure that they are clean, relatively free of pitch, and most of all, sharp. If the bit is dull, chipped, is excessively burned or has any other defect, it should be sharpened or replaced before use. 

Correct collet and collet nut fit

Most router collets have a recess (groove) that needs to click into a circlip that resides inside the collet nut. Failing to ensure that the collet 'clicked' into the collet nut will cause you to struggle to remove the router bit after tightening. This could cause the collet to break or be removed by a technical repair centre.

 

Correct fit inside the collet

When installing the bit into the collet, do not tighten the collet with the bit 'seated.' Instead, insert the bit until the shank (bit shaft) reaches the bottom of the collet, then ease it out about 2 mm before tightening the collet.

When the bit is tightened, there should be no less than  2/3 's of the length of the shank in the collet. If your bit has a shank that is too short, then the bit should be replaced. 

 

Safety gear

There are a few other safety measures to keep in mind whenever you use your router. First of all, remember to always wear appropriate safety gear as indicated above.

Correct speed setting

Second, be sure to set your router to the proper speed for your router bit. Setting your router to an incorrect speed will not only affect the router's performance, but also can cause the bit to break much more easily and even cause bodily harm. The speed at which a router bit turns can be important. The typical router runs at about 22,000 rpm, which is fine for most bits. But as the diameter of the bit increases, you ll want to slow things down.

Also, before beginning any routing operation, be certain that you give the router's motor time to come up to full speed for the chosen setting. Beginning to cut before the bit is at full speed can give less than desired results. 

Observe the following at all times

  • Wear a protective face shield or Safety Glasses to prevent eye and face injury.
  • Wear ear plugs or ear muffs to protect your hearing.
  • Use a respirator or dust mask to give protection from dust particles. Wood dust may remain in the air for hours after using power tools.
  • Always read and follow router operator's manual instructions.
  • Make sure that router rpm's and the bit selected match.
  • Dress properly. Wear short sleeves, no loose fitting clothes, proper footwear and no jewellery. Tie back long hair.
  • Always be sure the router is unplugged before replacing bits and that the switch is off before connecting the router.
  • Be sure the router bit has completing stopped spinning before sitting the router down.
  • Be sure bits, clamps and attachments are secure before starting up.
  • Keep children, pets and visitors at a safe distance.
  • Be especially cautious when working small pieces.
  • Keep hands and fingers away from revolving bits and cutters.
  • Do not operate routers in moist or wet areas.
  • Always grip tool tightly and be prepared at start-up to resist the motor torque.
  • When using a router table, make sure on/off switch is easily accessible.
  • Learn the sound of your router and shut it off at any unfamiliar sounds or irregularities.
    Never start the router with the bit in contact with the material.
  • Always feed in the proper direction, against the direction of bit rotation.
  • Maintain equipment. Replace worn parts, discard worn-out bits and check router periodically. Clean parts with appropriate solvents.
  • Don't operate a tool if you are tired or under the influence of medication, drugs, alcohol or while smoking.
  • Check wood for nails, screws or loose knots before routing.
  • Keep your mind on your work, avoid distractions, work at a comfortable pace and stop before you get tired.

Do a dry run

  • Place the router on the final work surface and test you cut by moving the router over the whole are to cut with THE ROUTER SWITCHED OFF
  • You do not want to waste an expensive piece of wood
  • You do not want to start all over
  • Never met anyone with spare fingers - SAFETY
Part No. Shank dia. Cutting width Cutting Height Angle (°)
KP904 1/2 inch 1 5/8 inch 3/4 inch 45°
12.7 mm 41.30 mm 19.05 mm

 

Length of Shank: 32 mm
Replacement bearing part number: KP100 1-2

 

 



KP904Router Bits > Profiles > Chamfer
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70352200657

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 25 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Sandra Dutson
Birmingham, US
★★★★★ 5
Worth the money.
It’s very nice. Good quality. Not cheap. Handles well. I’m very satisfied!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
C
Chief
Waukegan, US
★★★★★ 5
One of the best genral-purpose frothers out there, period
For the longest time, I've been looking for what seems like a unicorn -- something about the size of a mini-frother, but stronger than most. Almost a mini-submersion blender, really. And I still haven't found it. But the Maestri House frothers are about the closest thing I have found, which gives me hope that my unicorn might really exist someday. Unlike cheaper frothers that almost always warn you off from actually washing them, Maestri House makes theirs waterproof. Seriously, you can froth sloppy and get it all up in the whisk end of this, then rinse the whole thing under the faucet if you want to. I really don't recommend that for the speed ring at the top of this one, as a precaution and because it should never be necessary, but you can if you have to. Despite what I believe is cheaping out on the battery at just 1200mAh, it really can last a while, especially if you use it just once or twice a day. That it recharges using a USB-C connector is definitely a bonus. The speed ring at the top is great feature, overall. It turns on at a slow speed and lets you crank it all the way up to a speed that I still haven't found a good use for. This provides a lot of flexibility, from gentle mixing to full-on danger frothing. The included whisks can all be pretty handy. The whisk-whisk is good for things like two or three whole eggs, and the frother-whisk is good for general-purpose frothing. I really haven't figured out what the hook-whisk is for, because this isn't really made for handling any kind of dough, but it might work well for medium-to-thin batters. Generally speaking, I can easily recommend Maestri House frothers over just about any other handheld frother you're going to find. For completeness, though, there are a few things that I think could be improved upon: - The battery. Once you're into the $25+ range, I would expect a a high-current 2000mAh battery, for longevity and torque. - The speed ring is flexible, but depending on your dexterity and grip it can be tricky to operate when dialing in just the right speed, with just one hand. And there's no "Off" button, so you have to wind it down to "Off". For some reason I often end up spinning it the other way and making it go faster instead. Muscle memory should take over eventually, but still. A dedicated On/Off button would be handy. - For as beefy as this device feels, it doesn't handle thick liquids as well as I expected. The torque for basic mixing and frothing tasks is more than enough, but get this into thicker liquids or even four+ eggs, and it starts to bog down. - Like most frothers of this type, the balance of the whisks is a variable thing. If a whisk shaft gets even a little bent this thing will shake, at least when started at slow speed. Things usually settle out at higher speeds, but I'd really like to see the shaft of the whisks made thicker and more rigid so they don't bend so easily. - The frother whisk is good for what it is, and will quickly make great, basic foam. But unless you have supreme technique, it probably won't be good for any kind of latte art. This isn't a big problem in my mind, just something to be aware of. - The stand is okay at best, and unstable at worst. It's just a bit short for some whisks, so some of them can bottom out on the counter and make it unstable. Bending the holder at the top back just a bit with some good pliers, so the whisks are tilted up and away from the bottom, can help. I'll probably end up designing a 3D printed stand to hold this more security, as well as store the extra whisks. - I'm really not a fan of the textured finish on this model. It feels good enough, and the color is okay, but there are obvious seams on each side that, in my opinion, take away from the aesthetic. My call would be that whatever finish might be on the body, it should be seamless around the entire cylinder. I want to be clear, that none of the comments above are intended to warn you off of this if you're looking for a very good, well made frother. I doubt that you can find anything better! I only mention them because nothing is perfect, and to temper the reader's expectations. This brand, if not this specific model of frother, is almost certainly everything that you are looking for. If there's anything you don't like about this particular model on paper, I urge you to consider literally any other handheld frother they make. It only falls short compared to my unicorn device, something I don't ever expect to see from anyone else, but really believe that Maestri House could deliver if they think there's a market.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
G
Gadget Reviewer
Charlottesville, US
★★★★★ 4
It is an upgrade from PRODUKT
There's a lot to like with this frother. First off, it gets super-fast. It has good power but struggles a bit through thicker liquids at high speeds. I really got it exclusively for frothing milk and making really smooth chocolate milk. For those things it works well. I like the stand. I just keep a napkin under it so it will drip dry after rinsing. It is easy to clean because you can just run it on about medium under running water. I've been using it for about 3 weeks now, probably once every other day, and I'm still on the first charge. To me that is excellent battery life. It spins true, even at high speed. The key is to treat it well and probably make sure to use the stand instead of laying it on the counter. Because of the high RPM, any imbalance or bend at all is really going to be exaggerated. The only thing I am not crazy about is the control. I don't like that I have to twist it off while in the liquid. I wish there was just a switch along with the adjustment ring.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2026
M
Verified Purchase
Mike from San Diego
Port Orchard, US
★★★★★ 5
I love it!
Color: Black, Size: Rechargeable
This thing works great! It holds a charge for a long time. I love that it has different attachments. I use it mainly for mixing powder into my drinks. It is very powerful. The speed is adjustable too. It feels good to hold too. It lights up when you squeeze the trigger and when it starts losing charge, the light bar gets shorter. I highly recommend it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2026
K
Verified Purchase
KindleDiva
Draper, US
★★★★★ 5
Perfect all-around frother, stand keeps it nice and neat on the counter within easy reach.
Color: Black, Size: Rechargeable
Rechargeable, lightweight, variable speeds and optional whisks all make this the perfect item for your kitchen. You can quickly froth milk for your coffees, whip a small batch of whip cream, and even make mug cakes with the hook attachment. The price is very compatible with the competitors, but the ease of use makes this a top choice. The variable speeds makes it much better to control than the push button ones. When you let go of the pressure switch it turns off, no need for a dedicated on-off switch. Having the pressure switch on the top makes it extremely easy to use! It fits very comfortably in the hand and with the metal stand, looks quite nice on the counter, ready to use at any time. I highly recommend this InstaWhisk!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026

recommand products