62Y-W006A-00 Maintenance Kit for Yamaha F9.9 F9.9C F15 F15A | JLM Marine

62Y-W006A-00 Maintenance Kit for Yamaha F9.9 F9.9C F15 F15A | JLM Marine62Y W006A 00 Maintenance Kit for Yamaha F9. 9 F9. 9C F15 F15A JLM Marine This comprehensive maintenance kit is engineered to fit Yamaha 4 stroke outboard engines, specifically the 9. 9HP F9. 9 and F9. 9C (1998 2008) and 15HP F15 and F15A (1998 2007) models. It provides all essential service components in one convenient package to keep your engine running at peak performance. Designed as a direct replacement for Yamaha OEM part number 62Y W006A 00,

62Y-W006A-00 Maintenance Kit for Yamaha F9.9 F9.9C F15 F15A | JLM Marine

This comprehensive maintenance kit is engineered to fit Yamaha 4-stroke outboard engines, specifically the 9.9HP F9.9 and F9.9C (1998-2008) and 15HP F15 and F15A (1998-2007) models. It provides all essential service components in one convenient package to keep your engine running at peak performance.

Designed as a direct replacement for Yamaha OEM part number 62Y-W006A-00, this kit eliminates the need to source individual components separately. Each part meets OEM specifications to ensure reliable operation and longevity.

• Complete service solution including water pump components, filters, thermostat, and sacrificial anode
• Covers critical maintenance points: cooling system, fuel system, lubrication, and corrosion protection
• All gaskets, seals, and hardware included for hassle-free installation

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This maintenance kit includes 15 components covering all major service points:

• 63V-44322-00 - Cup, Insert × 1
• 63V-44323-00 - Plate, Wear × 2
• 63V-44352-00 - Impeller × 1
• 647-44366-00 - Water Seal Damper × 1
• 664-44338-00 - Key × 1
• 97095-08045 - Bolt × 4
• 63V-44301 - Housing Water Pump × 1
• 61N-24560-10 - Fuel Filter × 1
• 5GH-13440-00 - Oil Filter × 1
• 66M-12411-01 - Thermostat × 1
• 62Y-12414-00 - Thermostat Gasket × 1
• 90430-08020 - Drain Gasket × 4
• 91490-30025 - Cotter Pin × 1
• 61N-45251-01 - Anode × 1
• 24OP149 - Gear Oil Pump × 1

Installation Guide

1. Preparation: Disconnect the battery and remove the engine cowling. Gather all tools and have the kit components laid out for easy access.
2. Water Pump Disassembly: Remove the lower unit from the engine following your service manual. Access and remove the old water pump housing and components.
3. Impeller Replacement: Install the new impeller into the housing, ensuring the vanes rotate in the correct direction. Apply marine grease to facilitate installation and initial priming.
4. Water Pump Assembly: Install the wear plate, insert cup, key, and water seal damper in proper sequence. Secure the new housing with the provided bolts, torquing to specification.
5. Fuel Filter Replacement: Locate the inline fuel filter in the fuel line. Replace with the new filter, ensuring proper flow direction as marked by arrows on the filter body.
6. Oil Filter Replacement: Remove the old oil filter using a filter wrench. Lubricate the O-ring on the new filter with clean engine oil and hand-tighten into position.
7. Thermostat Replacement: Access the thermostat housing on the cylinder head. Remove the old thermostat and gasket, clean the mating surfaces thoroughly.
8. Thermostat Installation: Install the new thermostat with the spring facing downward. Place the new gasket and secure the housing cover.
9. Drain Gasket Replacement: Remove drain plugs from the lower unit and engine oil pan. Replace old drain gaskets with new ones to prevent leaks.
10. Anode Replacement: Remove the old sacrificial anode and clean the mounting surface. Install the new anode with the cotter pin to secure it properly.
11. Reassembly: Reinstall the lower unit, ensuring proper alignment and spline engagement. Refill with fresh gear oil using the provided gear oil pump.
12. Final Check: Reconnect the battery, replace the cowling, and perform a water test. Check for proper cooling system operation and inspect for any leaks.

Troubleshooting & FAQ

Q: How do I confirm this maintenance kit fits my specific Yamaha engine?
A: Cross-reference your engine model and year with the compatibility table above. This kit fits F9.9/F9.9C (1998-2008) and F15/F15A (1998-2007) models. You can also verify by checking your current OEM part number 62Y-W006A-00 or consulting the Yamaha parts diagrams linked above.

Q: How often should I replace these maintenance components?
A: Yamaha recommends full maintenance service annually or every 100 hours of operation, whichever comes first. The water pump impeller should be inspected yearly and replaced if worn, while filters and thermostats follow the same annual schedule.

Q: What are the signs that my water pump or filters need replacement?
A: Key warning signs include reduced water flow from the telltale (pee hole), engine overheating, loss of power, rough idling, or difficulty starting. If you notice any of these symptoms, inspect and replace the affected components immediately.

Q: Can I install this kit myself or do I need a marine mechanic?
A: If you have mechanical experience and the proper tools, you can install this kit yourself following the service manual. However, the water pump replacement requires lower unit removal, so professional installation is recommended if you're unfamiliar with outboard servicing.

Q: What's the difference between this aftermarket kit and the OEM Yamaha version?
A: This is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.