CE-9120TJS - TJ/LJ/XJ/MJ/ZJ Johnny Joint Front Trac Bar

CE-9120TJS - TJ/LJ/XJ/MJ/ZJ Johnny Joint Front Trac BarRockJock's Johnny Joint adjustable front trac bar for the TJ XJ LJ MJ features an offset Johnny Joint rod end that puts the bar further forward providing more clearance between the diff and the trac bar. Other features include 1 1 4 Inch x . 250 wall 4130 chrome moly construction, a welded in gusset from the bar to the Johnny Joint, heavy duty adjustor end with with bushing and steel insert sleeve that bolt into the factory housing bracket, and semi

RockJock's Johnny Joint adjustable front trac bar for the TJ/XJ/LJ/MJ features an offset Johnny Joint rod end that puts the bar further forward providing more clearance between the diff and the trac bar.

Other features include 1 1/4 Inch x .250 wall 4130 chrome moly construction, a welded in gusset from the bar to the Johnny Joint, heavy duty adjustor end with with bushing and steel insert sleeve that bolt into the factory housing bracket, and semi-gloss black powder coat finish.

Some drilling is required for installation. The supplied frame bolt is a 5/8 Inch and this hole must be drilled to size to accommodate the heavier duty bolt.

Note: This trac bar is intended to be used with a minimum of 2 Inch of lift. It may work on vehicles with less lift with Dana 30 frontends, however, on vehicles with no lift and a Dana 44, 9 Inch or 60 frontend, you may run into a clearance issue. Always check fitment before drilling!

Details:

• Johnny Joint Trac Bar
• 97-06 Wrangler TJ and LJ Unlimited/XJ/MJ Front
• Bolt-On
• Adjustable
• Greasable
• Chromoly
• Drilling Required
• Reuses Stock Housing Bolt