6D9-W006A-00 Service Kit for Yamaha F200C F225B | JLM Marine

6D9-W006A-00 Service Kit for Yamaha F200C F225B | JLM Marine6D9 W006A 00 Service Kit for Yamaha F200C F225B JLM Marine This comprehensive service kit is engineered for Yamaha 4 stroke outboard engines, specifically the F200C and F225B models from 2012 onward. It consolidates essential maintenance componentsincluding water pump parts, fuel filters, oil filter, thermostat, and drain gasketsinto one complete package for convenient service intervals. Direct OEM replacement part number 6D9 W006A 00, this kit

6D9-W006A-00 Service Kit for Yamaha F200C F225B | JLM Marine

This comprehensive service kit is engineered for Yamaha 4-stroke outboard engines, specifically the F200C and F225B models from 2012 onward. It consolidates essential maintenance components—including water pump parts, fuel filters, oil filter, thermostat, and drain gaskets—into one complete package for convenient service intervals.

Direct OEM replacement part number 6D9-W006A-00, this kit ensures compatibility with your Yamaha engine and simplifies routine maintenance by bundling all critical wear items in a single purchase.

• Includes complete water pump rebuild components (impeller, housing, gaskets, pins, and hardware)
• Features multiple fuel filters, oil filter, thermostats, and drain gaskets for comprehensive service
• Designed for Yamaha 4-stroke outboard engines F200C and F225B (2012 and newer)

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This service kit includes the following components:

• 61A-44322-02 – Cup, Insert × 1
• 6E5-44315-A0 – Gasket × 1
• 6E5-44352-01 – Impeller × 1
• 6G5-44323-00 – Plate × 1
• 90280-04M05 – Key × 1
• 93210-37M67 – O-ring × 1
• 93210-86M38 – O-ring × 1
• 93606-12019 – Pin × 2
• 97080-08045 – Bolt × 4
• 6E5-44311-00 – Housing × 1
• 6CB-24501-01 – Fuel Filter × 1
• 6P3-WS24A-00 – Fuel Filter × 1
• 63P-13915-00 – Fuel Filter × 1
• 69J-13440-00 – Oil Filter × 1
• 67F-12411-01 – Thermostat × 2
• 90430-08020 – Drain Gasket × 4
• 91490-40030 – Cotter Pin × 1
• 24OP149 – Gear Oil Pump × 1

Installation Guide

1. Disconnect the battery and ensure the engine is off and cool before beginning any work.
2. Remove the lower unit following your engine's service manual to access the water pump housing.
3. Disassemble the old water pump by removing the housing, impeller, plate, and gaskets. Clean all mating surfaces thoroughly.
4. Install the new impeller (6E5-44352-01) into the housing, ensuring the blades curve in the correct direction of rotation.
5. Lubricate the impeller and O-rings with glycerin or soapy water to prevent tearing during installation.
6. Install the plate (6G5-44323-00), insert cup (61A-44322-02), key (90280-04M05), and secure with pins and bolts provided.
7. Replace all gaskets and O-rings (6E5-44315-A0, 93210-37M67, 93210-86M38) to ensure a watertight seal.
8. Replace the oil filter (69J-13440-00) and all three fuel filters (6CB-24501-01, 6P3-WS24A-00, 63P-13915-00) according to your engine's service manual locations.
9. Install the two new thermostats (67F-12411-01) and replace the drain gaskets (90430-08020) on all drain plugs.
10. Use the gear oil pump (24OP149) to refill the lower unit with the correct grade and quantity of gear oil.
11. Reassemble the lower unit and torque all fasteners to manufacturer specifications.
12. Reconnect the battery, start the engine, and check for proper water flow from the tell-tale and verify no leaks.

Troubleshooting & FAQ

How do I confirm this service kit fits my Yamaha engine?
Verify your engine model and year against the compatibility table above—this kit is designed for F200C and F225B models from 2012 onward. Cross-reference the OEM part number 6D9-W006A-00 with your engine's service manual or parts diagram to ensure correct fitment.

How often should I replace the water pump and filters in this kit?
Yamaha recommends water pump service every 3 years or 300 hours of operation, whichever comes first. Fuel and oil filters should typically be replaced annually or at 100-hour intervals, depending on operating conditions and fuel quality.

What are the signs that my water pump impeller needs replacement?
Watch for reduced water flow from the tell-tale, engine overheating, steam from the engine, or an increase in operating temperature. If you notice any of these symptoms, inspect and replace the water pump components immediately to prevent engine damage.

Can I install this service kit myself or do I need a mechanic?
If you have mechanical experience and the proper tools, you can perform this service yourself following the installation steps and your engine's service manual. However, professional installation is recommended if you're unfamiliar with lower unit removal or water pump service procedures.

Does this kit include everything I need for a complete service?
This kit includes all essential water pump components, fuel filters, oil filter, thermostats, drain gaskets, and a gear oil pump. You will need to supply fresh gear oil, engine oil (if performing an oil change), and basic hand tools.

Is this an OEM part or aftermarket replacement?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.