Pay in installments of $41.44 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 25 - Jul 30
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
EBC S1 Kits Ultimax Pads and RK rotorsDO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ? Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle. The ? Thermic Black coating? is an anti corrosion
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
Damond Motorsports offers a variety of brake components to suit different performance needs.
Since we pull vehicle fitment data from various manufacturers, vehicle fitment may be incorrect. If you're unsure if this EBC or any other EBC product fits your vehicle, please reach out to us.
Looking to upgrade further? Check out our brake caliper bushings, built for performance, whether for daily driving or track use.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2013 | Mitsubishi | Lancer | DE |
| 2009-2017 | Mitsubishi | Lancer | ES |
| 2011-2014 | Mitsubishi | Lancer | ES Sportback |
| 2015 | Mitsubishi | Lancer | Evolution Final Edition |
| 2010-2015 | Mitsubishi | Lancer | Evolution GSR |
| 2010-2015 | Mitsubishi | Lancer | Evolution MR |
| 2010-2011 | Mitsubishi | Lancer | Evolution MR Touring |
| 2010 | Mitsubishi | Lancer | Evolution SE |
| 2012-2016 | Mitsubishi | Lancer | GT |
| 2012-2014 | Mitsubishi | Lancer | GT Sportback |
| 2009-2011 | Mitsubishi | Lancer | GTS |
| 2010-2011 | Mitsubishi | Lancer | GTS Sportback |
| 2009-2015 | Mitsubishi | Lancer | Ralliart |
| 2010-2011 | Mitsubishi | Lancer | Ralliart Sportback |
| 2012-2017 | Mitsubishi | Lancer | SE |
| 2016-2017 | Mitsubishi | Lancer | SEL |
| 2007-2012 | Mitsubishi | Outlander | ES |
| 2010-2012 | Mitsubishi | Outlander | GT |
| 2007-2008 | Mitsubishi | Outlander | LS |
| 2008-2012 | Mitsubishi | Outlander | SE |
| 2007-2011 | Mitsubishi | Outlander | XLS |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 27 reviews
Sort
Product Reviews
★★★★★ 5
Easy assembly and great cut
Husband said it was easy to put together and the blade did a great job
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 5
Great power and east to maintain straight cuts.
I have zoysia grass, and if your familiar with that you know its as thick as crab grass. I also had a sidewalk and driveway that hadn't been edged for a couple of years. This edger was up for the task. It easily cut away 3-5 inches of over-growth a few inches thick. I actually filled up 3 lawn bags which is a lot. I also like the way the edger is easy to maintain a straight line for a nice finish. I found that a back-and-forth motion was the best way to remove years of over-growth. Now that I have conquered the over-growth, I run the edger once every month and I am able to keep a clean professional looking edge along my driveway and sidewalks. Because this is electric, it has plenty of power. And because of the wheels it is easy to move and is not to heavy. It's a little loud so ear protection would be wise but not necessary. I have purchased some replacement blades and put them on and it only takes a few minutes and is easy to do. My neighbor was using his battery powered edger, he has zoysia grass also and asked to borrow my edger. He has since bought his own just like mine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 3, 2025
★★★★★ 5
Great edger
This is a great lightweight and portable edger. It’s much easier to use than a gasoline powered model. The only limiting factor is the length of the electric cord. It does a great job and make sure your driveways and sidewalk look manicured.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 6, 2026
★★★★★ 5
Easy of use.
Easy to use for edging driveway. I am not a professional and a senior who is learning to take care of my yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 3
Nice Edger as long as the blade doesn't come loose -- and it will come loose, repeatedly!
Probably could've/should've rated this 2 stars yet it works well when it works. I purchased this edger to edge my drive and sidewalks and not for trenching. The edger arrived very quickly after I ordered it (I am not a Prime member so this was a nice surprise). Assembly was easy and straight-forward. The first use went smoothly and the edger performed flawlessly and provided clean, smooth edging. About 20 minutes into the second use I noticed that the edger was cutting and quickly determined that the blade was spinning freely -- fortunately the hex nut was still attached to the threaded shaft. I reviewed the manual that came with the edger, grabbed the correct sized socket and torque wrench. I removed the hex nut, the first washer, the blade and then the second washer. To install I followed the directions ensuring that the flats of the washer aligned with the flat on the shaft and tightened the hex nut to the specified 140 in-lbs. The edger worked well for about 10 minutes and the blade once again became loose. This time I replaced the original blade (which did not need to be replaced from a wear perspective) with a new B&D blade and new washers. Once again I followed the instructions and this time the edger performed flawlessly until about 5 minutes remaining in my edging when once again the blade came loose. my experience has most certainly been frustrating to say the least. one should not need to carry a socket and torque wrench with them and repeatedly need to tighten the blade. So, when the edger performs as intended it does an excellent job at edging; however I have no confidence that this edger will be able to perform as intended throughout repeated uses and more importantly has shown that it cannot complete my edging without requiring tightening the blade (which requires disassembly down to the second keyed washer). Potential buyers should be prepared for this experience and make your decision accordingly. Note: I tried contacting black and decker via twitter (@blackdeckerhome) and never received a response; I could not find a separate customer service/support twitter account. Trying to contact customer service via the phone these days is an exercise in patience to say the least.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 11, 2022