Pay in installments of $59.99 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
LV429852Main Range Compact Product name Compact NSX Product or component type Circuit breaker Device short name Compact NSX100N Device application Distribution Poles description 4P Protected poles description 3t Neutral position Left Network type AC Network frequency 50 60 Hz [In] rated current 100 A at 40 C [Ui] rated insulation voltage 800 V AC 50 60 Hz [Uimp] rated impulse withstand voltage 8 kV [Ue] rated operational voltage 690 V AC 50 60 Hz Breaking
Main
| Range | Compact |
| Product name | Compact NSX |
| Product or component type | Circuit breaker |
| Device short name | Compact NSX100N |
| Device application | Distribution |
| Poles description | 4P |
| Protected poles description | 3t |
| Neutral position | Left |
| Network type | AC |
| Network frequency | 50/60 Hz |
| [In] rated current | 100 A at 40 °C |
| [Ui] rated insulation voltage | 800 V AC 50/60 Hz |
| [Uimp] rated impulse withstand voltage | 8 kV |
| [Ue] rated operational voltage | 690 V AC 50/60 Hz |
| Breaking capacity code | N 50 kA 415 V AC |
| Breaking capacity | 85 kA at 240 V AC 50/60 Hz conforming to UL 508 10 kA Icu at 660/690 V AC 50/60 Hz conforming to IEC 60947-2 35 kA Icu at 525 V AC 50/60 Hz conforming to IEC 60947-2 20 kA at 600 V AC 50/60 Hz conforming to UL 508 50 kA at 480 V AC 50/60 Hz conforming to UL 508 36 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 50 kA Icu at 380/415 V AC 50/60 Hz conforming to IEC 60947-2 50 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 90 kA Icu at 220/240 V AC 50/60 Hz conforming to IEC 60947-2 |
| [Ics] rated service breaking capacity | 10 kA at 660/690 V AC 50/60 Hz conforming to IEC 60947-2 35 kA at 525 V AC 50/60 Hz conforming to IEC 60947-2 36 kA at 500 V AC 50/60 Hz conforming to IEC 60947-2 50 kA at 380/415 V AC 50/60 Hz conforming to IEC 60947-2 50 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 90 kA at 220/240 V AC 50/60 Hz conforming to IEC 60947-2 |
| Suitability for isolation | Yes conforming to EN 60947-2 Yes conforming to IEC 60947-2 |
| Utilisation category | Category A |
| Trip unit name | TM-D |
| Trip unit technology | Thermal-magnetic |
| Trip unit protection functions | LI |
| Pollution degree | 3 conforming to IEC 60664-1 |
Complementary
| Control type | Toggle |
| Mounting mode | Fixed |
| Mounting support | Backplate |
| Upside connection | Front |
| Downside connection | Front |
| Auxiliary contact composition | Without |
| Mechanical durability | 50000 cycles |
| Electrical durability | 10000 cycles 690 V In conforming to IEC 60947-2 20000 cycles 690 V In/2 conforming to IEC 60947-2 30000 cycles 440 V In conforming to IEC 60947-2 50000 cycles 440 V In/2 conforming to IEC 60947-2 |
| Connection pitch | 35 mm |
| Local signalling | Positive contact indication |
| Neutral protection setting | No protection (3t) |
| Protection type | L : for overload protection (thermal) I : for short-circuit protection (magnetic) |
| Trip unit rating | 63 A at 40 °C |
| Long time pick-up adjustment type Ir | Adjustable |
| Long time pick-up adjustment range | 0.7...1 x In |
| Long time delay adjustment type | Fixed |
| [tr] long-time delay adjustment range | 120…400 s at 1.5 x In 15 s at 6 x Ir |
| Short-time pick-up adjustment type Isd | Fixed |
| [Isd] short-time pick-up adjustment range | 500 A |
| Short-time delay adjustment type | Fixed |
| Height | 161 mm |
| Width | 140 mm |
| Depth | 86 mm |
| Net weight | 2.4 kg |
| Compatibility code | NSX100 |
Environment
| Overvoltage category | Class II |
| Electrical shock protection class | Class II |
| Standards | EN/IEC 60947 UL 508 |
| Product certifications | EAC Marine CCC |
| IP degree of protection | IP40 conforming to IEC 60529 |
| IK degree of protection | IK07 conforming to IEC 62262 |
| Ambient air temperature for operation | -35…70 °C |
| Ambient air temperature for storage | -55…85 °C |
Offer Sustainability
| Sustainable offer status | Green Premium product |
| REACh Regulation | REACh Declaration |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| Environmental Disclosure | Product Environmental Profile |
| Circularity Profile | End of Life Information |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 5
Great chair!
Color: Black
Had some issues with Delivery! But got the chair. Beautiful and comfortable. Had one once before as a gaming chair, same kind but bought it from walmart. I used to fall asleep in it all the time. Now i have it for work! One of the best chairs for the cheapest price you can get! If you want a more comfortable chair then this..... your looking at about 300 bucks. Which is next on my list!
It comes with its own screws and washers. The manual is self explanatory however you do kinda gotta play the guessing game. It's pretty simple! match the screws up with the ones in diagram. It comes with an Alan wrench. Your hand might be a bit tired tho. I advise to tighten them with super lock tight or gorilla glue so they never come unloose. And gorilla glue the bolt covers on.
Keep in mind if you use gorilla glue..... they will never come off. Lol. But as far as tighting it.... do not over tighten it. Tighten enough to where you have to put some pressure on it to turn it half way and stop.
Another tip, it's a bit of a pain to set it up with one person. If you got an extra set of hands... use em. If not.... you might be their for a bit.
Start with setting up base.
Then put arms on seat.
(Keep bolts loose but screwed in. You'll see why later when you tighten them down)
Then attach back to arms and seat.
(Now make sure bolts are in holes and tighten them down. But not at once! Do about 4 turns, move to another one. Then the other side. It's like tightening lug nuts on the wheel of a car. If you tighten one all the way down it will throw all the other bolts off and make it much more difficult to ease the bolts into the holes they go in)
Then attach seat to base.
Believe me. It's way easier if you do it like that instead of how the installation instructions say.
After that, put the caps on the holes to cover the bolts. If you don't glue them, they will pop off ..... their not..... super good. But!!!! 1 or 2 drops of gorilla glue and you never have to worry about them popping off. (They seem like they go on their tight, but they don't stay on!)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 31, 2024
★★★★★ 4
Nice chair but definitely not breathable.
Color: Black
Once I figured out the arms had a left and right...the chair was easy to put together. The faux leather is nice. The seat is (or will be once I break it in) very comfortable. I have 2 minor complaints. It is extremely straight up and down. I haven't had much chance to play with it to see if I can get it to recline even an inch. That would help. And number two, it's HOT. I'm going to have to get some sort of seat pad because the pleather is not breathable and every time I get up my bum is sweaty. I know, TMI. But all in all I think it will serve my purposes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
Highly recommend
Color: Black
Beautiful chair, comfortable and rolls well, the directions were not very clear, we had the seat on backward at first, but finally figured it out and the chair is perfect, I've had it over a year and it works perfectly
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
★★★★★ 5
Good quality, fairly easy assembly
Color: White
Comfortable chair as advertised. Assembly time about 20 minutes with one screwdriver needed.
(Note: don't follow the instructions included. Lay the left arm assembly down on the floor and THEN affix the seat, followed by turning that over on its side and adding the right arm assembly. Trying to affix the two arms in an upright position is too difficult as directed.)
The only thing I don't like about it is the fluted upholstery on the seat and back, where a bit more padding would have helped greatly. Otherwise, it's comfortable and functional and reasonably priced. Delivery was on time.
ADDITIONAL COMMENTS AFTER 18 MONTHS OF USE: I've used the chair for 6-8 hours a day. The leather on the arms is cracking in multiple places. This is a big disappointment. And speaking of the arms, there's a major problem with the sewing of the leather on the outside edge of both left and right arms: the stitching is on the top at the outer edge, which means that it forms a jagged edge that your arms scrape on when resting on the leather. That jagged edge scraping my skin has caused a great deal of chafing, is most irritating, and could have been avoided entirely if they had just applied the stitching one inch further down on the side rather than along the top flat edge. This is a major design flaw. I will not buy this chair again because of the one flaw and the too-thin, cracking leather on the flat top of the arms, which is too bad, because it's fine in all other ways.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2020
★★★★★ 3
Good, but not great
Color: White
I work from home, so having a really comfortable chair that supports my back and provides me a nice place to sit for 8 hours is really important to me. I ordered this chair in March 2023 and was really happy with it at first. Sleek, easy to put together, and comfortable. I then had an issue with it because after I sat on it while wearing leggings, the entire seat and armrests turned black from the fabric. No other furniture I own turns black from my leggings. I reached out to the seller and they were kind enough to provide me a replacement for the seat and the two armrests at no charge. I went through the whole summer and didn't wear leggings. However, I am now in Oct 2023 and wearing leggings again. The chair seat and armrests are black again, but there is also a lot of wear to the chair in general. I understand I sit in it a lot, but the seat lost its comfort factor. Additionally, I lean on the left armrest a lot and it shows - there is a large indent on it. The fake leather material is just not for me and the chair no longer looks attractive. I wish it lasted longer considering how much I paid for it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 9, 2023
recommand products
KLUHSMAN RACING PRODUCTS #6AN Stainless Fuel Filter KRC-4706BK
132.95
VIBRANT PERFORMANCE Turboflex Coupling W/ Interlock Liner 3.5In 61108
118.95
TAYLOR/VERTEX SBC 8MM Pro Race Wires- Red 76230
121.95
SCE GASKETS SBC Titan Copper Head Gasket 4.155 x .043 T111543
120.95
LEED BRAKES Proportioning Valve Disc/Drum PV2_B
118.95