Libec 5.3m/17.5' Extension zoom cable for LANC and Panasonic cameras

The Libec EX-530DV is a professional-grade extension zoom cable designed to bridge the distance between a tripod pan-handle remote controller and a compact camera utilizing LANC or Panasonic remote protocols. It provides a generous physical reach, making it essential for complex setups like production jibs, studio cranes, elevated tripods, or remote camera configurations.

Core Features & Practical Utility

• Universal Prosumer Interface: The cable features standard 2.5mm mini-jack connectors on both ends. This layout is standard for sub-mini remote ports found on a wide range of compact cinema cameras, camcorders, and mirrorless rigs.

• Dual-Protocol Compatibility: It serves as a lossless data extension for universal controllers like the Libec ZC-3DV or the Libec ZFC-5HD (zoom/focus remote). This configuration lets the operator switch seamlessly between Sony/Canon LANC protocols and Panasonic control standards over the same long physical cable run.

• Shielded Signal Path: The internal wiring is insulated against radio frequency (RF) and electromagnetic interference (EMI). This heavy shielding prevents data delay, stuttering commands, or sudden signal drops when routing the cable alongside high-voltage studio power leads.

Hardware Technical Specifications Matrix:

Operational System Tips for the EX-530DV:

💡 The Jib Pivot Loop: When running this 5.3-meter extension cable along a production crane like the Libec Swift Jib50, never pull the wire taut across the moving structural joints. Always anchor the cable securely to the frame using touch-fastener straps while leaving a generous loose loop directly over the central fulcrum and front tilt hinges. If the line is strapped completely flat, pitching the crane up or down will pull the cable tight, straining the camera's delicate 2.5mm input socket or ripping the plug loose mid-take.

• Mode Switch Verification: The EX-530DV simply extends the electronic signal pass-through. If you switch from a Sony camera to a Panasonic camera body and notice the zoom control is unresponsive, confirm that the physical selector toggle on the side of your attached ZC-3DV or ZFC-5HD controller block is clicked over to match the correct camera brand.