Pay in installments of $8.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Aerpro APUSBGM2 DUAL USB TO SUIT HOLDEN/ISUZUDUAL USB TO SUIT HOLDEN ISUZU Model: APUSBGM2 Brand: AERPRO Category: CAR AUDIO ACCESSORIES Type: VEHICLE SPEC PANEL ADAPTERS Aerpro APUSBGM2 Dual USB Charge & Sync has been designed specifically to suit various Holden & Isuzu vehicles (Vehicle housing may require modification in some models). It replaces the spare factory switch blanking plates in the vehicle dashboard that measure 22mm wide x 39mm high, providing seamless USB integration for your
DUAL USB TO SUIT HOLDEN/ISUZU
Model: APUSBGM2
Brand: AERPRO
Category: CAR AUDIO ACCESSORIES
Type: VEHICLE SPEC PANEL ADAPTERS
Aerpro APUSBGM2 Dual USB Charge & Sync has been designed specifically to suit various Holden & Isuzu vehicles (Vehicle housing may require modification in some models). It replaces the spare factory switch blanking plates in the vehicle dashboard that measure 22mm wide x 39mm high, providing seamless USB integration for your vehicle. Featuring two USB ports, one is designed for smartphone and device fast charging at 3A max and the other provides USB pass through sync for Audio, CarPlay & Android Auto when connected to the rear USB input on compatible aftermarket headunits. The USB ports are bidirectional, allowing the cable to be connected either way and the charge port illuminates blue making it easy to find day and night. The clip-in design combined with the simple 3 wire plus USB connection, makes it quick and easy to install, providing a professional and discreet USB upgrade solution for the vehicle.
Key Features:
- Suitable for Holden & Isuzu vehicles with 22mm wide x 39mm high switch blanking plates
- Replaces factory switch blanking plates in the dashboard
- Vehicle specific OEM style design for discreet seamless USB integration
- Dual USB ports, one fast charge and one sync pass through
- Charge port supports up to 3 amps max and illuminates blue
- Audio/sync port provides USB pass through for Audio, CarPlay & Android Auto when connected to compatible headunits
- Bidirectional USB ports, allowing the cable to be connected either way
- Ferrite choke on USB cable to reduce signal interference
- Simple clip-in design makes it easy to install with no modifications required
- 3 wire installation; accessory power, illumination, earth/ground, plus USB connection
Specifications:
- VEHICLE APPLICATION: VARIOUS HOLDEN & ISUZU VEHICLES
- PANEL DIMENSIONS:
- BODY: 22MM (W) X 39MM (H)
- FACE: 22MM (W) X 39MM (H)
- CONNECTION TYPE: DUAL USB
- USB 1: FAST CHARGE 3.0A MAX
- USB 2: PASS THROUGH (AUDIO AND SYNC)
- MOUNTING TYPE: CLIP-IN
- WIRING INSTALLATION:
- 12V+ ACCESSORY POWER: RED
- EARTH: BLACK
- ILLUMINATION: BLUE
- USB CONNECTION: USB-A
- NOTES:
- The AUDIO USB Port is pass through, it will only function when connected to the rear USB input of an aftermarket head unit.
- Not recommended for aftermarket head units with a USB lead from rear of unit. Recommended for aftermarket head units with USB port on the rear of unit.
- Vehicle housing may require modification in some models.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 5
Good shelves!
Easy enough to assemble and as shown in the pictures you can shape the shelves how you want them. There is one screw hole in the mounting bracket right in the narrow part which makes it difficult to get a screw into. To get around this I just put a screw in at an angle. The quality is decent and I would not overload these by any means. However, if you are looking for cheaper shelves that look decent for light items these will work great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 10, 2025
★★★★★ 3
Great shelves for the price (~$15), but could be better.
Unlike many others here reviewing the item, I took note of the dimensions & the rough surface of the wood *before* purchasing it & read the instructions that tells you how NOT to assemble it. So my review won't be mentioning how it was smaller than I expected, how unexpectedly rough the wood was, or the fact that it fell off my wall because I didn't read the instructions.
About how NOT to install it- never screw into the board such that the weight is relying on the *screws* to keep it up. Whichever way you place the brackets in relation to the wood, above or below, make sure the weight is ON THE BRACKETS. In other words, *never* screw in from THE TOP OF the shelf.
The instructions specifically point this out, so if you see any reviews about the screws stripping out of the wood and the thing crashing to the floor-- they didn't read the instructions and they assembled it incorrectly.
And no, unlike what some reviews here are telling you, it is not painted plastic. It is wood.
I sanded it, it's wood. They tell you that in the description of the item, too.
Paulownia, but yes, the weight of it reminds you of styrofoam, which isn't a bad thing. Ive read its a sturdy wood, relative to how much it weighs.
I was already expecting rough boards when I bought it, but on top of that fact the surface had the grossest hand-feel I've ever felt (probably from the surface + the paint they used) that I ended up lightly sanding it with 120 grit (which helped a ton with the feel while also doing very little to the painted surface) and painted it with some white paint that we had on hand (it was originally grey). Much better.
The brackets getting in the way of screwing is awful because I don't have a 90° angle screwdriver, but it worked out alright enough. The resulting angle wasn't severe by any means, but still I recommend making sure you have a 90° angle screwdriver before purchasing because I'd much rather it be nice, clean, flush screws.
One point of serious suggestion for the seller would be that the brackets need more than a quick dot of welding. Even though my brackets came relatively even and all with unbroken welding, judging from other reviews and looking at mine, this is an area that could definitely do with some improvement.
Another suggestion for the seller would be to include a few extra drywall anchors. I ended up breaking three of them trying to get them in my drywall and now I have to go find some replacements.
I think our drywall is about as petrified as our studs because in looking up external sources for the best method of installing these types of anchors (to make sure I wouldn't break any. smh) they recommend to NOT predrill, as these are made with no predrilling in mind.
However, when trying to initially gently hammer them in with my rubber mallet as the instructions stated, they just weren't penetrating the drywall very far and I even made sure to pierce the paint layer (which is recommended if your walls have a thick layer of paint from over the years). I actually ended up quite extensively drilling in order to get the first portion of the anchors (before the threads) into the wall without doing too much damage to the anchors.
Ive gotten two of the three shelves up but can't get the last one up until I get more drywall anchors. So far so good. Lightly hand sanded and a couple coats of paint slapped on them and I quite like them.
Definitely takes a lot of time installing them though, so expect that before going into it.
Rated 3 stars for the gross hand-feel, the brackets needing more welding, the brackets that could've been more even with each other, the lack of warning that you'd need a 90° angle screwdriver, and the lack of backup drywall anchors.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 1, 2023
★★★★★ 5
WOULD buy again!!
Color: Dark Brown
VERY STURDY! Id buy them again. Easy to clean & hang on the wall. Look good hanging up. Weight capacity is more then i thought it would be.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 16, 2026
★★★★★ 5
style, durability, and functionality
The Amada HOMEFURNISHING Floating Wall Shelves offer a perfect blend of style, durability, and functionality. Whether you're looking to display decorative items or need extra storage space, these shelves are a valuable addition to any room. Their easy installation and sturdy design make them a worthwhile investment for enhancing your home's decor.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2025
★★★★★ 5
A Victorian Addition
Color: 4 Panels Black Wood, Size: 4 Panels, Color: 4 Panels Black Wood, Size: 4 Panels
I am so impressed! This room divider is a piece of Victorian architecture for my dressing area. Well made , eye-catching and refined...just beautiful!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2026
recommand products
TAG | Heavy Duty Towbar 3-Piece & Direct Fit Wiring Kit | Mazda BT-50 UP UR Styleside Tub 2011–2020 | T7F704-K103
475.60
Ultra Stitch Chain Tote Leather
670.00
15" Soft Close, Under-Mount, Full Extension Drawer Slide, 85 lb Capacity
23.96
Maryland Black Bears Essential Fleece Pullover Hooded Sweatshirt
49.00
TAG | Heavy Duty Towbar & Direct Fit Wiring Kit | Mitsubishi Outlander ZJ ZK ZL SUV 2012–2021 | T7C761-K201
429.87