SKU: 32509311817

Libec RT30B-3 Leg Semi Assembly for the Libec Model H38B

$1014.30 $1127.00
Save 10%
No.2 Bestseller on prudentsource.com >

Pay in installments of $281.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 30 - Aug 4

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Libec RT30B-3 Leg Semi Assembly for the Libec Model H38BThe Libec RT30B 3 Leg Semi Assembly is an original factory replacement leg sub assembly engineered directly for Libecs 75mm tripod series. While Libec tripod components are built to handle intense field production and Electronic News Gathering (ENG) routines, accidents on setsuch as a side impact drop, vehicle trunk pinch, or cross threaded locking collarscan damage a single leg segment while leaving the main 75mm head casting and fluid head

The Libec RT30B-3 Leg Semi-Assembly is an original factory replacement leg sub-assembly engineered directly for Libec’s 75mm tripod series. While Libec tripod components are built to handle intense field production and Electronic News Gathering (ENG) routines, accidents on set—such as a side-impact drop, vehicle trunk pinch, or cross-threaded locking collars—can damage a single leg segment while leaving the main 75mm head casting and fluid head completely intact.

Rather than forcing production houses to buy an entirely new tripod system, Libec provides the RT30B-3 as a direct repair component to swap out a compromised leg assembly, returning the kit to factory specifications.

1. Perfect Hardware Synergy: Designed for the H38B Fluid Head Ecosystem

The Libec H38B is a highly popular, classic 75mm claw ball professional fluid head with a fixed counterbalance, rated for mid-capacity setups up to 8kg (17.5 lbs). The legacy system typically paired this head directly with the native RT30B 2-stage aluminum tripod legs.

  • Zero-Tolerance Casting Alignment: The top yoke of the RT30B-3 sub-assembly is machined to perfectly match the spacing of the pivot pins on the 75mm bowl casting of the RT30B legs.

  • Torsional Spec Matching: It features the exact same tube diameters and high-tensile aluminum compound formula as the original legs. This ensures that when the leg is fully extended under a max-capacity H38B camera payload, it bends and flexes identically to the other two legs, preserving the tripod's overall torsional tracking balance.

2. Complete Multi-Stage Leg Architecture

The "Semi-Assembly" designation means this is a comprehensive, multi-stage structure that comes pre-assembled from the factory, rather than an unjointed loose tube. It includes:

  • The Twin-Strut Upper Aluminum Stage: Provides structural width and mounts directly to the tripod's main crown via heavy-duty hinge hardware.

  • The Intermediate & Lower Leg Extensions: High-strength telescoping aluminum sections that provide a versatile vertical height threshold.

  • Integrated Cine-Style Rotary Clamping Locks: Features Libec's robust, oversized rotating locking levers pre-installed on the leg segments. These temperature-independent locks provide high gripping force to eliminate vertical leg slipping, even when working in sub-zero alpine locations or extreme desert heat.

  • Native Foot Ground Interface: The lower leg section terminates in standard dual stainless steel spiked feet, ready to accept the standard Libec floor spreader or rubber foot pads.

3. Re-Establishing Original System Performance

Once installed, the RT30B-3 sub-assembly allows the H38B support system to perfectly regain its factory operational parameters:

  • Payload Support Integrity: Guarantees the system's full 12kg (26.5 lbs) tripod leg load threshold is safely restored, easily handling the 8kg maximum load limit of the H38B head.

  • Seamless Height Transitions: Ensures smooth, clean telescoping motion from an ultra-low profile height up to the system's maximum extension.

  • Mass Optimization: Keeps the overall system highly portable, maintaining the legs' original 2.6kg (5.7 lbs) weight profile for effortless run-and-gun transit.

Technical Summary & Specifications:

  • Component Type: Original Factory Replacement Leg Semi-Assembly

  • Part Reference Code: RT30B-3

  • Native System Compatibility: Libec RT30B Tripod Legs (Optimized for the Libec H38B / H38 / LX7 System Heads)

  • Fitting Interface: 75mm Bowl System Leg Mount Pivots

  • Material Composition: Die-Cast Aluminum Upper Casing / Aircraft-Grade Aluminum Tubes

  • Leg Design Configuration: 2-Stage / 3-Section Twin-Strut Architecture

  • Locking Mechanism: Integrated Rotating Cine-Style Lever Clamps

  • Terminal Base: Hardened Dual Stainless Steel Spikes

Repair Advice for Production Techs:

When replacing a full leg section like the RT30B-3, always perform the teardown on a clean, flat surface. Retain the original hinge pins, washers, and lock nuts from the tripod’s main upper 75mm bowl crown casting, as replacement leg sub-assemblies are designed to drop directly into your existing structural pivot hardware.

Restore your trusted ENG support setup to full factory precision—integrate the original Libec RT30B-3 leg sub-assembly into your repair workflow!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 32509311817

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
V
Verified Purchase
VickieCyber
Natrona Heights, US
★★★★★ 5
Not Squeakable for Mini/Toy Aussies
Size: Medium (VALUE 2-Pack), Style: Chicken
Very durable and good squeaker. However, too large and hard for my Mini Aussies to squeak. My Aussies love their squeaky toys, unfortunately not this one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
G
Verified Purchase
GB
Port Orchard, US
★★★★★ 4
Not indestructable, but very sturdy
Size: Medium, Style: Beef
I have recently been blessed (and cursed) with my first Super Chewer dog, a year old Australian Shepherd. She will chew herself out of boredom, so it's imperative we always have sturdy toys readily available for her, preferably in every room. Playology and Kong by and large have been the best toys we can find for her. Kong has a very good rubber ball, bone, and ring that have held up spectacularly (no noticeable damage after months of use, except maybe some pin-prick teeth marks). Dogs need a wide range of textures though for enrichment, so we've been dabbling with the Playology line (the tire, plush bone, dry-tech rope), including this ball. The scent factor is definitely interesting. Most people know Playology for the peanut butter scents, so I was very excited to find a multitude of flavors available on Amazon, especially with the different scents clearly labeled. I choose the red or beef flavored since the only two in the medium size in stock at the time were beef and sweet potato. The scent is indeed noticeable to humans, but it's not too strong or overwhelming on its own (walking down the Playology aisle in Petsmart can be overwhelming though since they have dozens of dozens of scented toys, much like going down a candle aisle). I can't speak for the dog on how she feels about the scent, but she took to the ball immediately, same as the normal peanut butter ones we get. The medium size is pretty much perfect for her (she's just under 50lbs). It's got decent bounce for playing fetch in the house, but not so bouncy that we're afraid to use it in the house. It's got a decent density to it as well that adds to the sturdiness. The biggest issue is the squeaker. It's not an obnoxious squeaker by any means, and the dog enjoys it very much. However, when you put a squeaker in any toy, it reduces the density and creates a weak spot dogs can exploit. She did good with the ball at first and was able to sit and chew on it for minutes as a time without doing any real damage (her teeth leave lots of pin-prick teeth marks, but they don't do any real damage to the ball, just superficial marks). Aussies are considered incredibly smart though, and it didn't take her long to learn she could rip out the bottom of the ball where the squeaker is sealed inside to tear the squeaker out, thus ripping the squeaker apart and compromising the structural integrity of the ball. We're debating if we want to toss the ball in the trash or attempt letting her play with it in a supervised session without the squeaker to see if it is safe. So, overall, this is a very tough ball. It does accumulate teeth marks that are essentially harmless, but there is a weak spot in the seam where the squeaker is inserted, which means this is not indestructible. It is by and large a great ball for fetch and likely won't ever be destroyed unless a dog is left with it long enough to chew a hole through that squeaker seam. Playology balls are pretty costly though, so the risk of it becoming unusable once the squeaker is ripped out is a bit off-putting. The bright side is that if you monitor your dog, you can likely get several weeks or months of use out of the ball; just no unsupervised play sessions. 7/10, durable, bouncy, and the scent keeps the dog interested, but the ball is not good unsupervised as it can be destroyed if the squeaker is ripped out. We will continue to buy Playology toys, but we will likely not buy too many of these balls until a more durable one (maybe without a squeaker) is released.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2022
L
Verified Purchase
Loving life!
Pawtucket, US
★★★★★ 1
No. Just no. My own dog shamed me…
Size: Medium, Style: Beef, Size: Medium, Style: Beef
My German Shepherd likes squeaky balls. She has lots of them. Most are similar to a tennis ball. By the way, don’t give your dog an actual tennis ball. The outer material is made for grip for tennis. It’s abrasive and is not good for your dog’s teeth enamel at all. Anyway, for $14.99, I thought I’d give this one a try. The pictured packaging alone was an eye grabber. The picture you see on Amazon is a cardboard with item specific info on the card: flavor, size, what it is (squeaky ball). The pictured product also has a hole in the card to secure and present the item the card describes. Even two color coded red zip ties securing the ball in the card hole. Awesome presentation and frankly that’s what made me give this a shot. So, as far as the presented product/packaging on Amazon, great job! I even sent a link to a buddy and he bought one too. Well, I cannot speak for everyone, but what I received was what’s pictured with my review. A red ball in a clear bag, along with a card that describes the product line. Nothing specific to what I actually bought (like the slick item-specific packaging on Amazon. To find that, I had to read the condensed description on the Amazon specific bar code that is right on top of a different barcode. This kind of thing displeases me. I want what grabbed my attention on amazon. No, this was not a return. This is how they come. I figured with item specific info on the packaging, the company is putting some money into packaging that makes you feel like you bought something specific. Pictured one says all natural beef. The chicken one says chicken. Pictured one says the size. Heck, I’d of been happy to at least have the ball attached to a card that at least says it’s a squeaky ball. Nope. Cost cutting is not ok when you are selling a beef flavored, medium size squeaky ball for $14.99. What arrives is an advertisement for the whole line, nothing that says what it is, the flavor, the size (unless you try to make out the Amazon bar code desc). Just a ball in a bag with an advertisement to buy other stuff they make. Maybe you received what’s pictured. I texted my buddy and asked him what he received. The exact same thing I did. In my opinion, when one cuts corners on packaging, I have no doubt corners could have been cut with the product itself. The squeak isn’t as easy as kong ball squeaker. Takes effort. So if your dog likes to play by walking/running around while constantly biting and getting that pleasing squeak each time, that didn’t happen here. Yes, I know the tennis ball type squeakers are different. But this says it’s a squeaker ball. Not just a squeaker ball, but a flavored squeaker ball. Mine smelled like rubber. Where’s the beef? I threw it a few times. My dog chased it a bit, did her usual “what’s this” evaluation, bit into it a few times with her very strong jaws, only to have no squeak. God as my witness, she dropped it, looked at me with what I insist is a look of disappointment, and walked away. She then went to the big bin of a huge variety of squeaky balls and grabbed one. She then went upstairs, with a squeak every second or so as she went up. I went and picked this one up with slobber and all. To get this to squeak requires opposing thumbs. So I suppose it could be marketed as a hand strengthener that squeaks. Friends lab had zero interest as well. So, I’m gong to actually return a dog toy. This was a disappointment. If it had come carded the way it shows on Amazon, I would not be as frustrated. I won’t take a chance when corners are cut when it comes to my dog. Update the picture to what I received is my advice to the company. I have a feeling what I got wouldn’t sell as easily. Topping it off, I noticed something odd. It doesn’t squeak when squeezing it, only when it is released to go back to its regular shape. So it’s a reverse reward. Weird. All the squeaker balls we have make a noise both when squeezing and releasing. Sorry Olina (my pooch).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 25, 2023
D
Verified Purchase
Dana H
Massapequa, US
★★★★★ 5
Best Toy EVER!
Size: Jumbo, Style: Peanut Butter
I was a bit skeptical. We have had NO joy in finding toys for "aggressive" chewers that actually last more than a day for our 1 year old Staffordshire/Pittie mix. He has jaws of iron! (or so it seems) Nothing holds up. He is literally eating them, and subsequently gets them taken away, within 24 to 48 h ours. IF that long. He finds it a challenge to get to the center of whatever toy he has, whether it is supposed to have a center or not! We bought this in April of last year!! Yes, the squeaker is no longer squeaking (a blessing in disguise) but the ball itself is still intact, with no nicks, dings, pieces missing, etc. It still bounces well, and he still loves it. 1 year later, still going strong! I didn't realize it had been that long, until today. So I had to write a review, and buy a couple more Playology Jumbo toys. I hope they hold up 1 tenth as well!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 20, 2025
E
Verified Purchase
E. Masters
Bozeman, US
★★★★★ 3
Hit or miss
Size: Medium, Style: Beef, Size: Medium, Style: Beef
I’ve purchased this item multiple times. Twice now, I got duds. Within minutes of opening the package, the ball was destroyed. The other times, it lasted months! I don’t know how to explain it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026

recommand products

Leg Avenue Sheer Thigh Highs With Lace Tops White UK 8 to 14
11.99
Philips Keyboard & Mouse (C214)
25.00
Ford F250-F350 Genuine Oil Reservoir Gasket New Part
35.90
QFM Front Brake Pad Set Suits Peugeot 305 New Part
39.05
Ford Mondeo Mk2/Mk3 Genuine Timing Chain Lower Tensioner Guide New Part
20.00