Pay in installments of $17.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 26 - Jul 31
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
iFlight BLITZ F7 V1.2 Flight Controller F722 ICM42688 - 30x30mmThe next generation of Flight controllers and ESC's from iFlight have arrived. Currently being used in their BNF quads such as the Chimera7 Pro BNF. These new flight controllers are equipped with a plug and play connectors making connecting your video transmitter, radio receiver, and other periphery sensors a breeze. They also make diagnosing issues in the field much easier with status indicator LED's that let you know in seconds if you are having a
The next generation of Flight controllers and ESC's from iFlight have arrived. Currently being used in their BNF quads such as the Chimera7 Pro BNF. These new flight controllers are equipped with a plug and play connectors making connecting your video transmitter, radio receiver, and other periphery sensors a breeze. They also make diagnosing issues in the field much easier with status indicator LED's that let you know in seconds if you are having a problem with the 3.3V, 5V, or VBat.
Check out all our 30x30mm Flight Controllers and the rest of our iFlight Products!
Features:
- Improved circuit design, better components and lower electrical noise!
- DJI HD VTX connector (plug-and-play / no soldering required)
- FC indicator LEDs for visual debugging
- LC Filter
F7 FC Specifications:
- MCU: STM32 F722
- Gyro: ICM42688
- Barometer: DPS310
- OSD Chip: AT7456E
- Flash: 32MB (Blackbox flash)
- UARTS: 6
- Motor outputs: 4x (SH1.0 connector)
- I2C serial: SDA / SLA pads
- Smartaudio / IRC Tramp VTX protocol supported
- LED controller: Yes
- Beeper pad: Yes
- Firmware target: IFRC-IFLIGHT_BLITZ_F722
- Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
- Dimensions: 36.5*35 mm
- Weight: 7.8g
- BEC: 5V 2.5A / 9V 2A
Wiring Suggestion:
- UART 1 FOR VTX HD / ANALOG
- UART 2 FOR A RECEIVER
- UART 3/4 /5 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT
- UART 6 FOR ESC TELEMETRY
TIPS:
- F722 MCU HAS INVERSION CAPABLE ON ALL UARTS.
- SBUS, CRSF, ELRS, IBUS, DSM ETC... CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2
- FRSKY SMARTPORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1
- F.PORT CAN BE CONNECTED TO ANY UART, WE SUGGEST UART_TX2.
Package Includes:
- 1 x BLITZ F7 V1.2 Flight Controller
- 1 x FC connectors (as above)
- 1 x silicon grommets
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 10 reviews
Sort
Product Reviews
★★★★★ 4
Makes a difference but maybe only to caffeine addled coffee snobs
Color: Black
I won't say that everyone urgently needs one of these. This is helped me up my game. Perhaps not absolutely necessary, but it noticeably reduces canalization and improves extraction. And it appears to have improved not only my espresso, but my pour-overs and my Mokapot (especially the Mokapot!). It's a little fiddley to assemble - there's sets of springs and needles - but once you get it all locked down, its very tight. There's a set of spares - I can't imagine needing them. The tool kinda sits in the weighted base, but it appears to stay put in my cabinet.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
Excellent espresso tool
Color: Black
Very nicely made and works as intended. Also comes with extra needles. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
★★★★★ 5
WDT Tool: The Needle in My Espresso Haystack
Color: Black, Color: Black
I kind of went down a deep dive researching these WDT (Weiss Distribution Technique) tools, and I have to say, this one hits the sweet spot! The needle size is just right, and the shape is spot on for what I need. Plus, it’s a nice perk that you can remove and replace the needles. I’ve tried using needles and bobby pins in the past, but they were too thick and just ended up creating their own channels—talk about a brewing disaster!
Now, here’s the twist: even though it comes with seven needles installed (and more replacements), I find it a bit overkill. With all those needles, it just traps the grinds in the center, pushing stuff around like it’s playing a game of “don’t let the coffee escape.” So, I stick with just three needles in a triangle formation for optimal distribution. Pro tip: don’t forget to adjust the depth as you use it to ensure you’re getting the best coverage of your coffee grounds!
The build quality is actually pretty impressive. It feels like well-constructed metal components that could survive a small espresso war. Plus, it's more affordable than some of those fancy options out there—because who needs a second mortgage for great coffee?
It looks quite nice on my counter, and the little stand is a handy extra touch.
Overall, if you’re looking to up your espresso game and avoid the chaos of uneven distribution, this WDT tool is worth considering. Just remember: less is sometimes more when it comes to needles!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 20, 2024
★★★★★ 5
Love this thing!!!
Color: Black, Color: Black
Hey, coffee lovers! ☕️ I recently got my hands on the WDT Espresso Distribution Tool Espresso Stirrer Tools for Barista, and let me tell you, it's a game-changer! 🙌 I'm absolutely thrilled with this amazing tool and can't recommend it enough to fellow coffee enthusiasts and professional baristas alike.
First things first, the build quality of this espresso stirrer is top-notch! 💪 The aluminum alloy handle not only adds durability but also gives it a sleek and professional look, especially in the matte black finish. Holding this tool feels great, and the ergonomic design ensures a comfortable grip even during those long brewing sessions.
The 0.35mm 7 needles are perfectly spaced, allowing for precise and consistent distribution of coffee grounds in the portafilter. This means a more even extraction and an enhanced flavor profile in every sip. And guess what? You get 7 extra replaceable needles as a bonus! 🎉 This ensures the longevity of the tool and easy replacement when needed.
But wait, there's more! The included stand is a fantastic addition to this package. 🎁 It not only serves as a convenient storage solution but also adds a touch of elegance to my coffee setup. No more rolling around and cluttered workspace. Everything stays in place, thanks to the stand!
Using the WDT Espresso Distribution Tool is a breeze! ⚡️ The precisely engineered needles and ergonomic design make it effortless to distribute the coffee grounds evenly. Whether you're a pro barista or a home brewing enthusiast, this tool will take your espresso game to new heights. Trust me on this one!
In conclusion, the WDT Espresso Distribution Tool Espresso Stirrer is an absolute must-have for any coffee lover out there. 💯 Its top-notch build quality, precision, and thoughtful design will bring joy to your coffee routine. So, don't wait any longer! Treat yourself and elevate your espresso-making experience with this amazing tool. Cheers! 🥳☕️
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 12, 2023
★★★★★ 5
Easy to use and affordable - great value for money!
Color: Black
I recently purchased the Nessus WDT Espresso distribution tool and I am thoroughly impressed with its performance. Assembling it was a breeze, and it came with extra needles which is always a plus. The tool is easy to clean, which is important to me because I like to keep my equipment in top condition. The price was very fair compared to other similar products on the market, making it an even better value for money.
One thing that really stood out to me was the brush that collects the coffee grounds. It's incredibly easy to clean, which makes maintenance a breeze. I've had my share of espresso machines in the past, and I can tell you that this one is a keeper. I would definitely recommend it to anyone looking for a high-quality distribution tool at an affordable price
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2025