Gedore 2133 T 10 Nut driver with 2C-T-handle 10 mm

Gedore 2133 T 10 Nut driver with 2C-T-handle 10 mmGedore 2133 T 10 Nut driver with 2C T handle 10 mm Asymmetrical 2 component wing handle for high torque level when loosening or tightening. The lengthened wing provides an optimum contact surface for the palm of one's hand. It thus easily transfers considerable forces in a relaxed hand's position. With T shaped cross section: broad at the top and slender below. In this way one's hand takes on a firm grip leading to vigorous working over an extended

Gedore 2133 T 10 Nut driver with 2C-T-handle 10 mm

Asymmetrical 2-component wing handle for high torque level when loosening or tightening. The lengthened wing provides an optimum contact surface for the palm of one's hand. It thus easily transfers considerable forces in a relaxed hand's position.
With T-shaped cross-section: broad at the top and slender below. In this way one's hand takes on a firm grip leading to vigorous working over an extended period without any fatigue.

Soft zones where sensitive hand zones grip e.g. finger tips. Hard zones where robust hand zones grip.
Hard component made of fiberglass reinforced plastic with special purpose glass fibers. The benefits of short glass fibers (rigidity and firmness) are combined with that of long glass fibers (impact strength).
Soft component made of thermoplastic elastomer
The concave form ensures exact hand centering and stops any blade tilting.
With hanging hole
Head depth 25 mm
GEDORE vanadium steel 31CrV3, matt chrome-plated