SKU: 39136487594

POLARIS RZR S 1000 RACKBOSS 2.0 RACK AND PINION FOR BIG LIFT KITS

$267.28 $296.98
Save 10%
No.2 Bestseller on prudentsource.com >

Pay in installments of $74.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 23 - Jul 28

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

POLARIS RZR S 1000 RACKBOSS 2.0 RACK AND PINION FOR BIG LIFT KITSNOTE: Only for use with SuperATV 710 Lift KitsA Rack and Pinion That Wont Break Your RZR was built to take the road less traveled, but what about your rack and pinion? Most rack and pinions break down after miles of rough riding, but not ours. SuperATVs Polaris RZR S 1000 RackBoss 2. 0 Rack and Pinion is specifically designed to never wear out thanks to our X24 technology. Its a unique dual bushing design that reduces wear and tear by over 50%. When

NOTE: Only for use with SuperATV 7”–10” Lift KitsA Rack and Pinion That Won’t Break


Your RZR was built to take the road less traveled, but what about your rack and pinion? Most rack and pinions break down after miles of rough riding, but not ours. SuperATV’s Polaris RZR S 1000 RackBoss 2.0 Rack and Pinion is specifically designed to never wear out thanks to our X24 technology. It’s a unique dual-bushing design that reduces wear and tear by over 50%. When you wear out that OEM rack and pinion—and you will wear it out—don’t replace it with the same parts. Upgrade to a RackBoss 2.0 that can put up with your giant lift, big tires, and other heavy-duty upgrades without ruining your steering.

Dual-Bushings for Durability
Our X24 technology is built for the way you ride. The durable PTFE bushings on both ends reduce unnecessary movement from internal gears and springs. There’s a built-in grease fitting too, so you can easily flush out the crud if you regularly bury your rig in the slop. Altogether, X24 tech reduces wear by over 50%. That means your rack and pinion will last longer no matter how you abuse your machine.

Solid Steel Bar Z-Bend Tie Rods
We didn’t skip a single detail with RackBoss 2.0—that’s why we include hardcore tie rods. Our Z-bend tie rods are a full 1” in diameter and made from solid steel. The tie rod ends are durable heim joints with 16 mm rack threads on one side and 3/4” rod threads on the other. The Z-bend is enforced with custom gussets for improved strength and performance. Put it all together and you’ve got a virtually indestructible tie rod.

  • Heavy-duty dual PTFE bushings:
    • Designed with X24 tech
    • Prevents wear
    • Reduces slop
    • Improves overall durability
  • Solid steel and billet aluminum tie rods use:
    • 3/4” outer tie rod ends
    • Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
  • 65% larger housing than stock
  • Over 50% less wear than OEM after 15,000 cycles
  • Grease fitting for rack gears
  • Polaris RZR S 1000 : 2016-2020
  • Polaris RZR S4 1000 : 2019-2020

NOTE: Only for use with SuperATV 7”–10” Lift Kits

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 39136487594

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
Bimmer369
Natrona Heights, US
★★★★★ 5
Solid; long lasting
I use this adaptor to hard wire an ethernet internet connection straight into a Samsung Galaxy S10+ with PD (charges phone while connected). I also use an S8+ which works, too. This is a great option for those of us who understand the dangers of being exposed to low-powered microwaves all day and night (AKA Wi-Fi). While hard wired to ethernet, you can enjoy the internet with airplane mode on, which is a big plus! I've used several different branded adaptors (the ones without PD kill your device's battery QUICKLY) for this purpose, and this Anker outshines them all. Most other brands (I've tried Belkin, Ugreen, and some other somewhat obscure brands) work fine for a short time and then begin to get spotty, losing and regaining connection intermittently until crashing and not working at all over a short period of time, usually not longer than 3 to 4 months if you're real lucky. However, I've had this Anker for nearly a year (10 months and change), and it's still going strong. Now, it's not perfect. It does lose connection from time to time and then regain connection just like the others, but nowhere near as frequent, and if you are mindful of the orientation of the cords and take care not to twist or put torque on them once they're connected to a device, it usually keeps connection very nicely. Be sure to put the device in the proper orientation through which you'll be looking at it, and THEN connect the adaptor (don't connect the adaptor and then have to roll the phone over to look at the screen, as this is the fastest way to kill the adaptor and loosen your phone's charging port). When first attaching, I plug the ethernet cable into the adaptor and use a hair-tie rubber band to wrap around the end of the ethernet cable, making sure it's tight with no slack, then I secure it around the BASE of the type-C cable coming out of the opposite end of the adaptor (see attached picture). Then LEAVE IT. If you incessantly disconnect and reconnect this adaptor, I guarantee it will not last as long. As for the features of this adaptor, I can only speak on the ethernet connection, the PD port, and the type-C 5gbps port. The PD port is nice because if you try connecting to the internet and doing pretty much anything without it, your device's battery is going to drain quite rapidly. How fast depends on how good your device's battery is to begin with. S10+ probably won't last half the time without PD as it does with PD. Just realize that your device is not going to gain power while charging through the PD port, but rather the battery will merely die at a slower pace, giving you more time before having to recharge your device. The other factor is how long your charging cable is (the shorter it is, the longer the battery will last). Tip: While using PD port, your device will not warn you of your battery about to die since it is technically charging, so if you're doing something important, you had better keep an eye on your battery percentage, lest it dies unexpectedly. I've not used the hdmi port at all, so nothing to speak on there. The 5gbps type-c port is nice if you want to connect an external hard drive while either A: connected to the internet, B: still being able to charge your phone, or both! I use the Samsung Portable SSD T7, and the Anker is great for saving large videos/files straight from the internet onto the external hard drive. The Anker is also good for freeing up space on your phone by moving existing files to the hard drive while continuing to charge your phone (otherwise, the hard drive connects directly to your phone, so your charging port is being used, and if your battery is low, no charging). Also, if you disconnected the ethernet cable from the Anker while moving files to an external drive, I suspect that the PD port would actually add battery percentage instead of merely slowing down the loss of battery percentage. To summarize: - Don't get Wi-fried: use a hard-wired ethernet connection instead! - Great adaptor that lasts longer than all others I've tried. - PD is a must have feature, but your device will still eventually die. - Great for saving videos/large files straight from internet to external hard drive while being able to charge device simultaneously. This Anker is the one you're looking for! Cheers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 15, 2022
A
Verified Purchase
Amiga95
Boise, US
★★★★★ 5
Excellent quality with just the right amount and type of connection points I needed!
Extremely good quality. I've used many Anker product over the years and this one didn't disappoint! Needed it to run a laptop on my network in isolation mode and to have accessible connections for ethernet as well as a wireless mouse and extra cooling fan as my laptop has only 1 standard size USB 3.0 port. This is the mini version so It won't necessarily supply enough juice to charge your laptop at the same time (there's another 8 in 1 made by Anker for that) but it can supply enough power to maybe get you through a very trying session, very short term. Super-easy to connect and just works. Fits comfortably in my carry bag too. Very light weight, good heat dissipation although I didn't really have any or at least not much. Compatible with all the connectors you see in the picture. In my case at least, it wasn't a luxury it was a necessity and it proved it's value immediately.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026
L
Verified Purchase
Lars Bogard
Dallas, US
★★★★★ 5
USB ports charge.
Relatively cheap, lightweight, and better than most. It gets warm, but not hot. The Video adapter was immediately recognized by my Macbook and works flawlessly at all resolutions made available (much higher than Windows PCs) I used it both as the recipient of my 65W Mac charger, and the Mac received its power from this device; I also had the 65W Mac charger plugged directly into the Mac, and this plugged into the second USB-C plug on the mac. It works (HDMI monitor) both ways. It says that the ports are not for "charging", however be aware that they do charge when devices are connected, for example my iPhone to the extra USB-C port, or the USB-A port. My Logi back-lighted keyboard lights up too. I don't know why they say it is not for charging. Perhaps it is simply saying there are no ports expressly intended to do charging without connecting to your computer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 18, 2026
J
Verified Purchase
J. Stewart
West Palm Beach, US
★★★★★ 5
High quality and all the right connection types
This works great. I've used it for both my MAC and PC. I really love the Ethernet on the end and the HDMI connections (which modern laptops don't include at times). This is a great adaptor and highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
B
Verified Purchase
B. Thompson
New York, US
★★★★★ 4
One complaint
Works very well and solved port issues on my X1 Carbon. My only quibble is that the C interface cable from the unit to the PC is a bit too stiff and tends to lose connection if things move about.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 5, 2025

recommand products

BelleGirl 100% Cotton Drawers Combo With Light Colour, Pack of 3
192.00
ACO Rose Perfumed Body Spray 200ML
175.00
TFZ WOW Pocket Perfume - 300 Sprays
40.00
Bows + Trees Tee
30.00
Arochem Black Jack Attar 6ML
216.00