Pay in installments of $53.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 27 - Aug 1
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Milwaukee M18 FUEL GEN 2 SUPER HAWG 18V Brushless 1/2 in. Right Angle Drill Kit (XC6.0 Batteries)M18 FUEL SUPER HAWG 1 2 in. Right Angle Drill Kit This Milwaukee M18 FUEL GEN 2 SUPER HAWG right angle drill delivers corded level power and speed in a cordless form. Its POWERSTATE brushless motor and REDLINK PLUS electronics pair with REDLITHIUM HIGH OUTPUT XC6. 0 batteries to bore large holes fast through studs and joists, with up to 100 2 9 16 in. holes per charge. Key Features: Corded Power in Cordless Form: POWERSTATE brushless motor and REDLINK
M18 FUEL SUPER HAWG 1/2 in. Right Angle Drill Kit
This Milwaukee M18 FUEL GEN 2 SUPER HAWG right angle drill delivers corded-level power and speed in a cordless form. Its POWERSTATE brushless motor and REDLINK PLUS electronics pair with REDLITHIUM HIGH OUTPUT XC6.0 batteries to bore large holes fast through studs and joists, with up to 100 2-9/16 in. holes per charge.
Key Features:
- Corded Power in Cordless Form: POWERSTATE brushless motor and REDLINK PLUS optimize torque and speed for heavy auger and hole saw drilling.
- High-Output Runtime: Includes two M18 REDLITHIUM HIGH OUTPUT XC6.0 batteries for up to 100 2-9/16 in. holes per charge.
- Durable, Controlled Drilling: All-metal 1/2 in. keyed chuck, mechanical clutch in low speed, and all-metal side handle.
- Enhanced Visibility & Comfort: Integrated LED work light and ergonomic right-angle design for tight spaces.
- Kit Complete: Comes with (2) batteries, M18/M12 Rapid Charger, side handle, chuck key, and contractor bag.
Specifications Table:
| Specification | Details |
|---|---|
| Battery System | M18 |
| Voltage | 18V |
| Motor Type | Brushless (POWERSTATE) |
| Chuck Size | 1/2 in. |
| Chuck Type | Keyed |
| Cordless/Corded | Cordless |
| Drill/Driver Type | Right Angle Drill |
| Maximum Speed | 1550 RPM |
| Power Tool Features | Bag Included, Brushless, LED Light, Second Handle Included, Variable Speed |
| Battery Power Type | Lithium-Ion |
| Batteries Included | 2 (M18 REDLITHIUM HIGH OUTPUT XC6.0) |
| Charger Included | M18 & M12 Rapid Charger |
| Included Accessories | Side handle, chuck key, contractor bag |
| Mechanical Clutch | In low speed |
| LED Light | Yes |
| Product Dimensions (WxHxD) | 3.8 in x 7.3 in x 20.5 in |
| Product Weight | 14.9 lb |
| Color | Red |
| Certifications | UL Listed |
| Manufacturer Warranty | 5 Year Tool & 3 Year Battery |
| Performance Claim | Up to 100 2-9/16 in. holes per charge; powers through up to 6-1/4 in. holes |
| Compatibility | Compatible with all M18 batteries |
Frequently Asked Questions (FAQ):
Q: What size holes can it handle?
A: With the brushless motor and mechanical clutch, it can power through up to 6-1/4 in. holes and routinely bore 2-9/16 in. stud holes.
Q: How many holes per charge can I expect?
A: Up to 100 2-9/16 in. holes through 6 in. beams per charge using the included HIGH OUTPUT XC6.0 battery.
Q: Is the chuck keyed or keyless?
A: It uses an all‑metal 1/2 in. keyed chuck and includes the chuck key.
Q: Are other M18 batteries compatible?
A: Yes. The tool is compatible with all Milwaukee M18 batteries.
Q: What warranty is included?
A: 5-Year tool warranty and 3-Year battery warranty.
Muscle for Tight Spaces, Engineered to Perform
A bold, industrial silhouette with Milwaukee’s iconic red brings purposeful energy to the jobsite. The compact right‑angle head slides between studs while the robust metal chuck grounds the design in durability. Style it with a rugged contractor bag and crisp black accessories for a cohesive kit that means business. It’s the refined workhorse that elevates every rough‑in to a luxury of power and precision.
Power through rough-ins faster—add the M18 FUEL SUPER HAWG kit to your cart today.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 14 reviews
Sort
Product Reviews
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast.
I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers.
(I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.)
I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers.
These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug.
I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin.
My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs.
I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals.
These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together.
The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug.
I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
★★★★★ 5
Great wire, great price
Size: 100-Foot, Style: 14-Gauge
There is something about this wire that makes me buy it again and again, and makes me feel like it’s a great value! it’s pure copper strands and it feels, looks solid and as good as anything I ever bought for the sound transmission
The cover is thick, but the wire is still flexible. Looks professional and the white looks better than the old school copper look. Getting the protective sleeve off is a bit of challenge but for me it’s worth it. Have a utility knife, wire strippers and if you have weaker hands, a pair of pliers or something to grip it with to remove from covering wires. It’s worth the effort to me as the results feel solid
I use this with my higher end vintage M&K, Sansui, Pioneer, Timeframe, and other amps, speakers and to my ears, it delivers simple, clean sound at a great price. Don’t buy the hype, buy good wire and call it a day. This 14 gauge even works well with clip posts like on my Sansui 9090DB. 👌
Only thing I would do different, buy the 200ft if you are hooking up Atmos or have multiple equipment. This is my third 100ft in as many months, Lol
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 18, 2023
★★★★★ 5
Perfect and easy to splice buy durable.
Size: 100-Foot, Style: 14-Gauge
Used for home audio setup. Klipsch speakers to Denon receiver. Could've wired directly but chose to add the plug ins for connecting. Sound quality is amazing. Perfect gauge and high quality strands. Easy to work with amd splice when needed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
recommand products
"Review Of Revues & Other Matters" 1930 COCHRAN C.B. [edited by]
108.50
Sonor Vintage Series 3 Piece Shell Pack Vintage Silver Glitter 13 16 22 w/ Mount
2769.97
"L'Etranger" 1942 CAMUS, Albert
1081.00
"Now We Are Six" 1927 MILNE, A.A. (SOLD)
175.00
"Childe Hassam An Island Garden Revisited" 1990 CURRY, David Park
125.00