SKU: 58567544303

Star Trek Enterprise 1701 Refit Navigation/Strobe Board

$64.79 $71.99
Save 10%
No.2 Bestseller on prudentsource.com >

Pay in installments of $18.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 27 - Aug 1

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Star Trek Enterprise 1701 Refit Navigation/Strobe BoardTenaControls 1001 BB Star Trek Enterprise 1701 Refit Navigation Strobe Board. Provides NAV and Strobe Lights for the Enterprise NCC 1701 A. This board simulates the Navigation and Strobe lights on the Star Trek Enterprise 1701 and 1701 A Refit. You will receive all the Navigation LEDs which are white, green and red as well as the white Strobe LEDs. This board fits nicely inside the saucer section for easy wiring to all the saucer sections, Navigation

TenaControls 1001-BB Star Trek Enterprise 1701 Refit Navigation/Strobe Board. Provides NAV and Strobe Lights for the Enterprise NCC-1701/A. This board simulates the Navigation and Strobe lights on the Star Trek Enterprise 1701 and 1701-A Refit. You will receive all the Navigation LED’s which are white, green and red as well as the white Strobe LED’s. This board fits nicely inside the saucer section for easy wiring to all the saucer sections, Navigation and Strobe LED’s. Hot glue is recommended for securing the board in place. This board can also be used in any model or application where LED’s need to be controlled at a certain interval. Navigation – 1 second On/Off. Strobes On – twice per second. The board size is extremely small (0.70 inch x 0.875 inch). Also included: Fully assembled – just connect switch, battery clip and LED’s, One (1) Battery clip for 9 volt battery, One (1) on/off switch – commercial grade, One (1) Micro JST Connector with wires, Wiring and shrink tubing, Red, Green and White LED’s, Best warranty in the business – 5 Year Warranty -volt battery holder and micro On/Off slide switch, which turns the car light board on or off, to the board for your convenience. You just need to plug the eight-wire JST connector into the mating connector on the board and connect the LED to its corresponding wire coming from the eight-wire JST connector. The magnetic reed switch allows you to toggle through all the light modes, just by using the enclosed supplied magnet. This feature allows for the car to stay intact, with no holes for a momentary switch (on plastic model cars). What’s included: One (1) fully assembled board – just connect the LED. One (1) battery clip for 12 12-volt battery and a 12-volt battery., One (1) on/off switch wired to the board., One (1) magnetic reed switch. One (1) magnet. Shrink tubing. Red, Orange and White LEDS. Miniature eight-wire JST connector. Best warranty in the business – 5 Year Warranty (for warranty claims, the buyer should contact TenaControls directly)., Made in the USA. Important: No interior or window lighting is supplied with this kit. This board will also work on 12 volt DC supply. This board can also be used in any model or application where LED’s need to be controlled at a certain interval. Model kit not included

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 58567544303

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 12 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ralversity
Massapequa, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Boise, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
J
Verified Purchase
Jennifer
New York, US
★★★★★ 5
Easy peasy
Size: 1 Panel, Color: Black
Bought this single-panel room divider for my son so he has a little privacy when he has to keep his camera on for online classes. It’s lightweight, easy to set up, and does the job—he can focus without me photobombing in the background. He can feel like he has his own tiny corner office, even if it’s just the basement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
A
Verified Purchase
Anonymous
Port Orchard, US
★★★★★ 5
It serves it's purpose!!
Size: 1 Panel, Color: Black
Product really works well & serves it's purpose! Great height & width. It's flimsy, but it will stand still when put in place.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2025
A
Verified Purchase
Amazon Customer
Houston, US
★★★★★ 1
Zero stars
Size: 1 Panel, Color: Black
The bars are impossible to screw in all the way so it’s not sturdy at all, trash and waste of time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026

recommand products

The Bradford Exchange The Bells from Game Of Thrones Epic Moments Sculpture Collection Issue #1 Light-Up 5-inches
136.00
The Bradford Exchange His Holiness Pope Francis Limited-Edition Music Box Classically-Style Porcelain Box with Metal Rosary Plays "Amazing Grace" 4-inches
69.95
The Bradford Exchange Butterflies Bereavement Bell Wind Chime Issue #2 Hand-crafted Heirloom Porcelain Hand-Glazed in Ivory with 22k Gold Accent with Heart-Shaped Metal Charms with Wooden Clangers 4" H x 3.50" D
60.98
The Bradford Exchange Devilish Donald from Disney Halloween Tractor Wagon Sculpture Collection Issue #4 Characters in Costume Handcrafted Hand-painted 5-1/2-inches
72.00
The Bradford Exchange Elvis™ How Great Thou Art The Gospel Truth Sculpture Collection Issue #1 Illuminated & Musical with Iconic Gospel Songs Inspirational Tribute to Elvis's Love for Gospel 7-inches
104.98