Pay in installments of $81.90 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 18 - Jul 23
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
TAG | Heavy Duty Towbar | Ford Ranger 4x2 Lowrider Tubbody PX 2011–2022 | T4F588TAG Heavy Duty Towbar Solution for your Ford Ranger PX Series This TAG Heavy Duty Towbar (T4F588) is specifically engineered and manufactured in Australia for the Ford Ranger 4x2 Lowrider with a Tubbody (Styleside), covering models from September 2011 to May 2022. This Class 4 towbar features a 50mm square hitch receiver and is rated for a 2500kg towing capacity, providing a robust and reliable solution tailored strictly for Rear Wheel Drive Lowrider
TAG Heavy Duty Towbar Solution for your Ford Ranger PX Series
This TAG Heavy Duty Towbar (T4F588) is specifically engineered and manufactured in Australia for the Ford Ranger 4x2 Lowrider with a Tubbody (Styleside), covering models from September 2011 to May 2022. This Class 4 towbar features a 50mm square hitch receiver and is rated for a 2500kg towing capacity, providing a robust and reliable solution tailored strictly for Rear-Wheel Drive Lowrider variants.
Key Features:
- Heavy Duty Class 4 Towbar - 50mm Square Hitch Receiver
- Specifically designed for 4x2 Lowrider Tubbody models
- Suits 4x2 (Rear-Wheel Drive) Only
- Durable Enamel Immersion Dipped and Powder Coated Finish
- TAG Limited Lifetime Warranty
- Includes: Tow Ball, Tow Ball Mount, Pin & Clip and D-Shackles
Please Note: A towbar is a safety critical item and not always a straightforward fitment due to vehicle manufacturing variation. We strongly recommend you get your towbar and wiring harness installed by a professional towbar or vehicle accessory fitting workshop.
Specifications:
- Towbar Class: Heavy Duty
- Towbar Capacity [kg]: 2500
- Static Load Capacity (Ball Weight) [kg]: 250
- Hitch Type: 50mm Square Hitch Receiver
- Exposure: Exposed
- Fits Models With Rear Step: Yes
- Bumper Removed During Fitment: Yes
- Bumper Cut Out Required: No
- Towbar Fitting Time [min.]: 60
Important Information
- The image shown may not reflect the actual product
- Shipping times may vary depending on destination and stock availability
Full Vehicle Applications List
| Make | Model | From | To | Body | Series | Engine | Variant | Drivetrain |
|---|---|---|---|---|---|---|---|---|
| FORD | RANGER | 09/2011 | 07/2015 | Ute | PX1 | P4AT | 2.2L | Diesel | XL | Manual RWD |
| FORD | RANGER | 09/2011 | 07/2015 | Ute | PX1 | P4AT | 2.2L | Diesel | XL | Manual RWD |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Great privacy screen
Size: 4 Panel-88"W, Color: Grey
Nice item, easy to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 15, 2026
★★★★★ 5
Great privacy screen
Size: 6 Panel-119"W, Color: Beige
I have a studio apartment and the bathroom is in my bedroom. I bought this to section the area off so guests can use my bathroom without seeing my entire bedroom. This is perfect for that! It looks very nice and offers alot of privacy. The screen is fabric and good quality! I’m a middle aged woman and put it together myself in about 2 hours. Love this!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 27, 2025
★★★★★ 4
Nice divider 6 panel with wheels.
Size: 6 Panel-119"W, Color: Black, Size: 6 Panel-119"W, Color: Black
The wall works great , and I put it together by myself. I only gave it what I did because I have to move one or two of the panels on one end around a bit daily to make an opening to pass through. I find I have to check the screws that hold those legs/feet on frequently and retighten them. Beyond that everything was pretty good quality. (I ended up magnetizing an Allen wrench to one of the feet.) I also put on motion lights to the rollers so you’ll see them and don’t trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
recommand products
Tanzania
16.00
Boss Fight Studio Epic H.A.C.K.S. Outlaw Skeleton Action Figure Highly Articulated Collectible Figurine and Accessories Pistol, Shotgun, Rifle Sling, Rope, Alternate Hands & Head, and Stand 1:12
34.98
Girls Merry Xmas Hoodie
39.99
Masters of the Universe Origins Turtles of Grayskull Mekaneck Reptile Wars Posable Action Figure, Teenage Mutant Ninja & Motu Crossover Hero Toy
23.99
Banpresto - Naruto Shippuden - Uzumaki Naruto Narutop99, Bandai Spirits Figure
25.98