Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 14 - Jul 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Pacemaker | 1¾" Competition Tuned Headers | VY Series II & WK Series II 5.7L LS1 | PH5361 L/R VY Series 2Pacemaker Competition Tuned Performance Headers VY Series II WK Series II 5. 7L LS1 Gen III V8 PH5361 L R VY Series 2 Maximize the performance of your Gen III V8 with the Pacemaker PH 5361 Competition Tuned Headers. Specifically engineered for the Holden VY Series II Commodore and WK Series II Statesman Caprice, these headers are designed for the high output 5. 7 Litre LS1 engine. This "Competition Tuned" design features 1" (44mm) primary pipes and a
Pacemaker Competition Tuned Performance Headers - VY Series II / WK Series II 5.7L LS1 Gen III V8 - PH5361 L/R VY Series 2
Maximize the performance of your Gen III V8 with the Pacemaker PH 5361 Competition Tuned Headers. Specifically engineered for the Holden VY Series II Commodore and WK Series II Statesman/Caprice, these headers are designed for the high-output 5.7 Litre LS1 engine. This "Competition Tuned" design features 1¾" (44mm) primary pipes and a 3" (76mm) outlet, providing excellent exhaust flow for modified engines and supercharged applications. This kit includes the necessary Oxygen Sensor Wiring Loom Extensions required for the Series II electrical setup. Proudly Australian-made and mandrel-bent, these headers ensure optimum exhaust pulse tuning and scavenging for both manual and automatic transmissions while maintaining clearance for power steering and air conditioning.
Features:
This product offers the following performance features:
- High Performance Flow: 1¾" (44mm) primary pipes and a 3" (76mm) outlet for increased power gains.
- LS1 V8 Optimization: Optimized for the 5.7 Litre Gen III engine across sedan, ute, and coupe bodies.
- Wiring Extensions Included: Features Oxygen Sensor extensions required specifically for VY Series II and WK Series II models.
- Tuned Design: Precision pulse-tuned lengths to enhance exhaust scavenging and engine efficiency.
- Forced Induction Ready: Specifically designed to suit modified engines and supercharged applications.
- Accessories Compatible: Engineered to maintain full clearance for Power Steering and Air Conditioning.
Product Specifications for PH 5361
| Feature | Value | Feature | Value |
|---|---|---|---|
| Part # | PH 5361 | Gasket | DSF 138 |
| Primary Pipe | 1¾" (44mm) | Oxy Sensor | Yes |
| Outlet | 3" (76mm) | Fitting Time | 3 Hrs |
| P/Steering | Yes | Air Con | Yes |
Important Notes:
- Specific Application: This kit is specifically for VY Series II and WK Series II. For Series I or VZ/WL models, alternative part numbers are required.
- Wiring Included: Oxygen Sensor Wiring Loom Extensions are supplied in this kit for a seamless installation.
- AWD Exclusion: This product will not fit All Wheel Drive (AWD) models (Adventra/Cross 8). Refer to PH 5366 for AWD headers.
- Matching Systems: Full performance exhaust systems are available to suit these headers for maximum gains.
Important Information
- The image shown may not reflect the actual product
- Shipping times may vary depending on destination and stock availability
Vehicle Applications:
| Make | Model | From | To | Body | Series | Engine | Variant | Drivetrain |
|---|---|---|---|---|---|---|---|---|
| Holden | Commodore / Crewman / Monaro | 2003 | 2004 | Sedan / Ute / Coupe | VY Series II / V2 | 5.7L LS1 V8 | Manual & Automatic | RWD |
| Holden | Statesman / Caprice | 2003 | 2004 | Sedan | WK Series II | 5.7L LS1 V8 | Manual & Automatic | RWD |
Payment & Security:
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 2206 reviews
Sort
Product Reviews
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo.
Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side).
I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure.
The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried.
I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable.
The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's.
Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020
★★★★★ 5
Stable and easy to assemble
I used these to support a heavy piece of countertop would to create a side table. Looks great and holds steady.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2023