Pay in installments of $101.14 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
XForce | 3" Turbo Back Exhaust No Cat 3-Bolt Flange | Mitsubishi Triton MN 2.5L 2009–2015 | E4-MT07-TBSXForce 3" Performance 4x4 Turbo Back Exhaust System Mitsubishi Triton MN E4 MT07 TBS Transform the performance of your 2. 5L Turbo Diesel Mitsubishi Triton MN with the XForce 3" Turbo Back Exhaust System. Engineered for maximum exhaust flow, this system replaces the restrictive factory pipework with a high flow 3" mandrel bent design. Crafted from rugged 409 stainless steel and finished with standard heat proof paint, it is built to withstand the
XForce 3" Performance 4x4 Turbo-Back Exhaust System - Mitsubishi Triton MN - E4-MT07-TBS
Transform the performance of your 2.5L Turbo Diesel Mitsubishi Triton MN with the XForce 3" Turbo-Back Exhaust System. Engineered for maximum exhaust flow, this system replaces the restrictive factory pipework with a high-flow 3" mandrel-bent design. Crafted from rugged 409 stainless steel and finished with standard heat-proof paint, it is built to withstand the demanding conditions of off-roading and heavy towing. This system provides improved throttle response, increased torque, and a deep, crisp engine note.
Note: This system is designed specifically to suit vehicles with a 3-bolt turbo outlet flange. It is a "No Cat" system intended for off-road or performance use.
What's in the Box?
- 1x 3" Turbo Dump Pipe (3-Bolt Plate)
- 1x 3" Connecting Pipe with Flex Bellows
- 1x 3" Raw 409 Stainless Steel Pipework
- 1x Centre Straight-Through Performance Muffler
- All Required Gaskets and Bolt Kit
Features:
This product offers the following high-performance features:
- 3" Mandrel-Bent Tubing: Ensures a constant diameter through every bend to minimize backpressure and optimize the 4D56T engine's output.
- 409 Stainless Steel: Provides high-strength durability and heat resistance, coated in heat-proof paint for added protection.
- Turbo-Back Design (No Cat): Maximizes flow directly from the turbocharger by eliminating the catalytic converter for peak performance.
- Heavy-Duty Flex Bellows: Integrated into the connecting pipe to absorb engine vibrations and prevent stress on the turbo manifold.
- Straight-Through Muffler: Designed to provide a deep performance tone while maintaining high-flow characteristics.
Specifications:
- Make: Mitsubishi
- Model: Triton
- Series: MN
- Year Range: 2009–2015
- Material: 409 Stainless Steel
- Pipe Size: 3 Inch (76mm)
- System Layout: Turbo Back (No Cat)
- Turbo Flange: 3 Bolt
Important Information
- The image shown may not reflect the actual product
- Shipping times may vary depending on destination and stock availability
Vehicle Applications:
Vehicle Applications for XForce E4-MT07-TBS
| Make | Model | From | To | Body | Series | Engine | Variant | Drivetrain |
|---|---|---|---|---|---|---|---|---|
| MITSUBISHI | ||||||||
| MITSUBISHI | TRITON | 09/2009 | 04/2015 | Ute | MN | 4D56T | 2.5L | Diesel | GLX | Manual 4WD |
| MITSUBISHI | TRITON | 09/2009 | 04/2015 | Ute | MN | 4D56T | 2.5L | Diesel | GL-R | GLX-R | ACTIV | Manual 4WD |
| MITSUBISHI | TRITON | 10/2009 | 04/2015 | Ute | MN | 4D56T | 2.5L | Diesel | GLS | GLX-R | Automatic 4WD |
| MITSUBISHI | TRITON | 10/2009 | 04/2015 | Ute | MN | 4D56T | 2.5L | Diesel | GL-R | ACTIV | Automatic 4WD |
| MITSUBISHI | TRITON | 10/2010 | 04/2015 | Ute | MN | 4D56T | 2.5L | Diesel | GLX | Manual 4WD |
| MITSUBISHI | TRITON | 01/2011 | 04/2015 | Ute | MN | 4D56T | 2.5L | Diesel | Manual | RWD |
Warranty Information
| Product Type | Warranty Period |
|---|---|
| 304 & 201 Stainless Steel Exhaust Systems | 60 Months |
| Accessories | 12 Months |
| Catalytic Converters | 12 Months |
| Electronic Products (Including SmartBox) | 12 Months |
| Mild Steel & 409 Stainless Steel Exhaust Systems | 24 Months |
| Mild Steel Headers | 12 Months |
| Stainless Steel Headers | 24 Months |
| Universal 304 Stainless Steel Mufflers | 24 Months |
| Universal Mild Steel & 409 Stainless Steel Mufflers | 12 Months |
Payment & Security:
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 17 reviews
Sort
Product Reviews
★★★★★ 5
Great chair!
Color: Black
Had some issues with Delivery! But got the chair. Beautiful and comfortable. Had one once before as a gaming chair, same kind but bought it from walmart. I used to fall asleep in it all the time. Now i have it for work! One of the best chairs for the cheapest price you can get! If you want a more comfortable chair then this..... your looking at about 300 bucks. Which is next on my list!
It comes with its own screws and washers. The manual is self explanatory however you do kinda gotta play the guessing game. It's pretty simple! match the screws up with the ones in diagram. It comes with an Alan wrench. Your hand might be a bit tired tho. I advise to tighten them with super lock tight or gorilla glue so they never come unloose. And gorilla glue the bolt covers on.
Keep in mind if you use gorilla glue..... they will never come off. Lol. But as far as tighting it.... do not over tighten it. Tighten enough to where you have to put some pressure on it to turn it half way and stop.
Another tip, it's a bit of a pain to set it up with one person. If you got an extra set of hands... use em. If not.... you might be their for a bit.
Start with setting up base.
Then put arms on seat.
(Keep bolts loose but screwed in. You'll see why later when you tighten them down)
Then attach back to arms and seat.
(Now make sure bolts are in holes and tighten them down. But not at once! Do about 4 turns, move to another one. Then the other side. It's like tightening lug nuts on the wheel of a car. If you tighten one all the way down it will throw all the other bolts off and make it much more difficult to ease the bolts into the holes they go in)
Then attach seat to base.
Believe me. It's way easier if you do it like that instead of how the installation instructions say.
After that, put the caps on the holes to cover the bolts. If you don't glue them, they will pop off ..... their not..... super good. But!!!! 1 or 2 drops of gorilla glue and you never have to worry about them popping off. (They seem like they go on their tight, but they don't stay on!)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 31, 2024
★★★★★ 4
Nice chair but definitely not breathable.
Color: Black
Once I figured out the arms had a left and right...the chair was easy to put together. The faux leather is nice. The seat is (or will be once I break it in) very comfortable. I have 2 minor complaints. It is extremely straight up and down. I haven't had much chance to play with it to see if I can get it to recline even an inch. That would help. And number two, it's HOT. I'm going to have to get some sort of seat pad because the pleather is not breathable and every time I get up my bum is sweaty. I know, TMI. But all in all I think it will serve my purposes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
Highly recommend
Color: Black
Beautiful chair, comfortable and rolls well, the directions were not very clear, we had the seat on backward at first, but finally figured it out and the chair is perfect, I've had it over a year and it works perfectly
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
★★★★★ 5
Good quality, fairly easy assembly
Color: White
Comfortable chair as advertised. Assembly time about 20 minutes with one screwdriver needed.
(Note: don't follow the instructions included. Lay the left arm assembly down on the floor and THEN affix the seat, followed by turning that over on its side and adding the right arm assembly. Trying to affix the two arms in an upright position is too difficult as directed.)
The only thing I don't like about it is the fluted upholstery on the seat and back, where a bit more padding would have helped greatly. Otherwise, it's comfortable and functional and reasonably priced. Delivery was on time.
ADDITIONAL COMMENTS AFTER 18 MONTHS OF USE: I've used the chair for 6-8 hours a day. The leather on the arms is cracking in multiple places. This is a big disappointment. And speaking of the arms, there's a major problem with the sewing of the leather on the outside edge of both left and right arms: the stitching is on the top at the outer edge, which means that it forms a jagged edge that your arms scrape on when resting on the leather. That jagged edge scraping my skin has caused a great deal of chafing, is most irritating, and could have been avoided entirely if they had just applied the stitching one inch further down on the side rather than along the top flat edge. This is a major design flaw. I will not buy this chair again because of the one flaw and the too-thin, cracking leather on the flat top of the arms, which is too bad, because it's fine in all other ways.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2020
★★★★★ 3
Good, but not great
Color: White
I work from home, so having a really comfortable chair that supports my back and provides me a nice place to sit for 8 hours is really important to me. I ordered this chair in March 2023 and was really happy with it at first. Sleek, easy to put together, and comfortable. I then had an issue with it because after I sat on it while wearing leggings, the entire seat and armrests turned black from the fabric. No other furniture I own turns black from my leggings. I reached out to the seller and they were kind enough to provide me a replacement for the seat and the two armrests at no charge. I went through the whole summer and didn't wear leggings. However, I am now in Oct 2023 and wearing leggings again. The chair seat and armrests are black again, but there is also a lot of wear to the chair in general. I understand I sit in it a lot, but the seat lost its comfort factor. Additionally, I lean on the left armrest a lot and it shows - there is a large indent on it. The fake leather material is just not for me and the chair no longer looks attractive. I wish it lasted longer considering how much I paid for it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 9, 2023
recommand products
WILWOOD Flexline Kit Frt Mustang II F S/L Caliper 220-9481
116.95
HYPERCO Rear Spring 5in ID 20in Tall 18SNT-100
129.95
AFE POWER Magnum FORCE Torque Boos ter Tube 54-10419
119.95
TAYLOR/VERTEX Race-Fit Spiro-Pro Plug Wire Blue SBC HEI 76630
121.95
MAHLE ORIGINAL/CLEVITE Valve Cover Gasket 1pk Ford 7.3L Diesel VS50329
118.95