Class 60(Original) Loksound Decoder

Class 60(Original) Loksound DecoderLokSound V5 DCC Sound Chip Designed specifically for the accurascale Class 60 locomotive, this decoder works seamlessly with the onboard lighting, PowerPack stay alive system and dual speaker configuration to reproduce the characteristic sound and function of an BR Class 60 at work. Recommended for the following locomotives from Run 1 of our Class 60 Locomotives: 60001, 60007, 60015, 60031, 60033, 60065, 60075, 60092 Common Features: The LokSound 5

Designed specifically for the accurascale Class 60 locomotive, this decoder works seamlessly with the onboard lighting, PowerPack stay-alive system and dual speaker configuration to reproduce the characteristic sound and function of an BR Class 60 at work.

Recommended for the following locomotives from Run 1 of our Class 60 Locomotives:

60001, 60007, 60015, 60031, 60033, 60065, 60075, 60092

Common Features:

• The LokSound 5 decoder works for analogue DC and AC (!) layouts.

  Sound

  The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.

  The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.

  Functions

  We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.

  Motor control

  Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.