SKU: 34522284979

Minn Kota PowerDrive™ 70 Trolling Motor w/Foot Pedal - Dual Spectrum CHIRP - 24V - 70LB - 60"

$571.50 $635.00
Save 10%
No.2 Bestseller on prudentsource.com >

Pay in installments of $158.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 24 - Jul 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Minn Kota PowerDrive™ 70 Trolling Motor w/Foot Pedal - Dual Spectrum CHIRP - 24V - 70LB - 60"PowerDrive 70 Trolling Motor with Foot Pedal Dual Spectrum CHIRP 24V 70LB 60" Reliable. Capable. And fully able to handle anything a day of fishing brings. PowerDrive shows up at the launch ramp every day with big time technology, trusted power, and easy operation. Also, comes with a mount that's tough, sleek, and built to take a beating, it's going to keep showing up day after day. Deploy Assist Lever Get in and out of the water easily. Just depress

PowerDrive™ 70 Trolling Motor with Foot Pedal - Dual Spectrum CHIRP - 24V - 70LB - 60"

Reliable. Capable. And fully able to handle anything a day of fishing brings. PowerDrive™ shows up at the launch ramp every day with big-time technology, trusted power, and easy operation. Also, comes with a mount that's tough, sleek, and built to take a beating, it's going to keep showing up day after day.

Deploy-Assist Lever

Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.

Built-In Dual Spectrum Chirp Sonar

Keeps your transducer and wiring completely concealed and protected running everything through the trolling motor's shaft. By covering a wide range of frequencies, Humminbird®'s CHIRP produces more accurate, more detailed returns of fish, structure, and the bottom than traditional sonar.

Side-To-Side/Electric Foot Pedal

Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Note: the foot pedal is not included with GPS-enabled models.

Push-to-Test Battery Meter

Press a button to get an instant "stage of charge" reading.

Digital Maximizer™

Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.

Power Prop

Delivers extra power to push through any fishing scenario and excels in open water.

Indestructible Composite Shaft — Guaranteed for Life

At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.

Cool, Quiet Power

Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.

What's Included

PowerDrive 70 lb. 60" motor with Built-In Dual Spectrum Chirp, Corded Foot Pedal, MKP-37 Prop, and Mounting Hardware

Specifications:

  • For Use In: Freshwater
  • Shaft Length (inch): 60"
  • Max Thrust (pounds): 24 lbs.
  • Voltage: 24
  • One-Boat Network Compatible: No
  • QUEST Series: No
  • Spot-Lock: No
  • Built-In Sonar: Dual Spectrum CHIRP
  • Foot Pedal Style: Side-to-Side / Electric
  • Control: Foot Pedal
  • Auto/Stow Deploy: No
  • Power Trim: No
  • Power Steering: Yes
  • Lift-Assist: No
  • Bowguard: No
  • Wireless Remote: No
  • i-Pilot Link (GPS): No
  • i-Pilot (GPS): No
  • AutoPilot: Yes
  • CoPilot: No
  • Speeds: Variable
  • Digital Maximizer: Yes
  • Battery Meter: Yes
  • Max Amp Draw: 42
  • Mount Style: Bolt-on
  • Mounting Location: Bow-mount 
  • Motor Style: Electric-steer
  • Prop: Power Prop (MKP-37)
  • Warranty: Two-Year Warranty

Manufacturer : Minn Kota
Manufacturer Part No : 1358470
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 34522284979

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 17 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
CV S.
Alexandria, US
★★★★★ 5
Wow this stuff works!!
Wow. What an amazing product. I own a 1976 Bertram 42 aft cabin motor yacht. The previous owner had not waxed it in a good long time. I spent a weekend with four friends sweating and laboring using the traditional wet sanding, buffing, and waxing it's heavily oxidized finish. One of the friends helping was a former professional boat detailer. The results were ok. The wax job lasted about six months before it looked like crap. There's a lot of controversy over Poli Glow. A number of the old fellows who sit around drinking coffee in the marina clubhouse swear that nothing should go on a boat except the most expensive and laborious traditional wax, preferably applied by a crew of of professionals. They universally ranted about the failings of Poli Glow despite having no practical experience. They also talk more than they actually boat, so I didn't listen to them. I was cautious, and started with my heavily oxidized flybridge. I wanted to work my way top to bottom and I figured if I hated the look, I could stop and it wouldn't really noticeable. It was easy to use. I bought the complete kit. Mixed the prep. Sprayed and scrubbed. Wow that stuff gets things clean and even. I wiped the Poli Glow on with the provided mitt. Tip: really, you needs to let each coat dry before applying the next. It was noticeable alright. From the dock you can now see an actual reflection of my antennae in the now shiny Fiberglas. It's amazing. I did find that the more oxidized portions were thirsty as heck and took a lot of coats. The results are worth it. Application is way less laborious than buffing and waxing. If you can wipe clean a countertop in your kitchen or galley you can Poli Glow like a pro. It's that stupidly easy. Where the gel coat was reasonably smooth the product built a mirror finish. I didn't even put her on the hard. I applied it while it was docked. I couldn't have five that with a buffer. My pro detailer friend was totally surprised at the result. Bottom line: if you have an older sad looking boat this stuff can make it shiny and happy with minimal labor. Good stuff well worth the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 29, 2017
P
Verified Purchase
pdb
New York, US
★★★★★ 4
Overall great product, especially on solid colours.
I bought a 33 year old boat that is mostly white gelcoat. Some of the white had yellowed in areas and there were bright spots where I removed stickers and hull numbers. The boat also has red and blue metal flake that was quite faded and gritty. The flake is large particles of metal or paint or whatever, not fine little glitter bits like they do now. I called Poli Glow Canada and the guy told me to use 600 grit wet sandpaper to smooth out the metal flake and then wash with the Poli Prep. The white came up pretty clean, but I had to use the sandpaper on some areas to take off the yellow. The Poli Glow went on really easily and quickly. When you are doing it, keep an eye on the the edges of the applicator. If the liquid starts to harden, wash the edges in warm water to get them soft again. I didn't do this and have some small bumps kind of like fuzz off a paint roller, which I guess is bits of dried liquid that came off the applicator. You will also get streaks if the edges are dry, but the next coat fixes that right away. Check after each coat to ensure it is smooth. I'm pretty sure a quick pass with the sandpaper would have removed the bumps, but by the time I was finished, I didn't want to mess with it. In the end, the white turned out looking great. The flake is definitely better than when I bought it, but it only shines at about 50% of original (compared to the flake on the transom which was in really good condition) and I was expecting better based on the before and after shots on their site. There are also some streaks in the flake from certain angles where I guess my sanding pressure wasn't consistent.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2013
T
Verified Purchase
The skinny...
Natrona Heights, US
★★★★★ 5
I am hard to please...especially expensive products...
K...So I have this 26 ft. sailboat. I have all the professional equipment you can use to restore fiberglass shine. However, a 15 year old sailboat's topside will usually have pitting that you COULD sand down and shine.. but this is a risky step as you think the gelcoat and if you go through, now you have an eyesore of an entirely different nature... My only problem with trying this was the idea that it would fade out shortly and possibly yellow. However, a bigger concern is continued breakdown of the glass surface. An over-riding concern. Wax on a surface that is pitted is usually short lasting and does shine well..good for 3 months, maybe. I bit the bullet and bought this after looking at it's competitors. BUY THE KIT, NOT JUST THE POLIGLOW. The cleaner worked better than any other I have bought. I don't know why. It just did. The scrubbing sponge is perfect for the job. I used a smaller dishwashing scrubber in tight spaces..it seriously was inadequate. This kit was made right, I'm thinking. Following the directions to apply per the bottle. I was skeptical about using a damp mit. I have done the entire cockpit area of the boat at this point with 6 coats and used maybe a half an inch of the product. And the boat looks absolutely AMAZING. Will this yellow? Will it last a year? IDK, but other reviews suggest positive experiences on both counts. Best of all, this will HALT the ongoing beating the topsides takes. (On another note, don't use this on nonskid. It's slick..just my opinion, maybe no more slick than new nonskid. But there is a really great product if you search "nonskid fiberglass surface restorer." Expensive but works.) Best description I can give you on how this will turn out is .. you know how good a surface that is aged looks when you wet it? That..but it stays. Yes, you will need 4-6 coats. But it dries very quickly and still doesn't use much product. At this performance level, the price was worth it. And I am frugal beyond belief. I would recommend that you do professionally buff any fiberglass surface with a good medium one step cutting compound and a professional buffer before you apply this to get best results. DO NOT USE THIS ON SURFACES THAT ALREADY ARE SHINY. It says so right on the kit. I also agree your smoothest outcome will come at room temp vs applying int the sun or significant heat. It dries quickly and doesn't even out as well before drying. Still, it will look great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2016
J
Verified Purchase
Jake D.
Battle Creek, US
★★★★★ 5
YOU WILL LOVE IT!!!
This is the best product I’ve ever used on our boat! We have a 26-year-old Tige wakeboard boat that had heavy oxidation and water spots. In addition to a heavily faded gel coat. I spent a few hours working on it and it completely restored our boat! I got the recommendation from my father in law after he used it on his RV. The results speak for themselves. I highly recommend this product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 21, 2026
J
Verified Purchase
JD S.
Houston, US
★★★★★ 5
Great Product!
Does what it says. It made my 20-year-old RV look like new!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026

recommand products

Cusco Strut Bar AS Rear AW11 MR2 NON S/C ONLY **MUST MODIFY Trunk LID** - 135 511 A
162.00
Dewalt D180080 5" (127 MM) STANDARD HOLE SAW
91.54
Dewalt DAJHXKMD01 7 X 5/8-11IN MEDIUM TURBO BACKING PAD
63.19
Dewalt D24001 STAND FOR D24000
188.13
Dewalt DAH180056 3-1/2 (89MM) BI-METAL HOLESAW
32.40