Pay in installments of $29.91 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Timing Belt Tensioner Pulley for VW Golf Citi, Polo Classic & Jetta - TBT8301BVehicle Fitment & Part Details This timing belt tensioner pulley is listed for the VW Golf Citi 1. 4i with a 72 mm outer diameter, 21 mm width, and 10 mm stud mounting hole. Covers a wide range of VW and Audi applications spanning the 1. 12. 0 petrol and early diesel engine families. Confirm compatibility by matching the listed fitment details and VIN engine chassis information where variants exist. Key Details SKU TBT8301B Component Timing Belt
Vehicle Fitment & Part Details
This timing belt tensioner pulley is listed for the VW Golf Citi 1.4i with a 72 mm outer diameter, 21 mm width, and 10 mm stud mounting hole. Covers a wide range of VW and Audi applications spanning the 1.1–2.0 petrol and early diesel engine families. Confirm compatibility by matching the listed fitment details and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- TBT8301B
- Component
- Timing Belt Tensioner Pulley
- Primary Fitment
- VW Golf Citi 1.4i AGY 76.5 kW (1999–2004)
- Specs
- 72 mm outer diameter, 21 mm width, 10 mm stud hole
Key Benefits
- Specified at 72 mm outer diameter, 21 mm width, and 10 mm stud mounting hole — match these measurements to your removed unit before ordering.
- Covers the full VW/Audi 1.1–2.0 petrol and early diesel timing belt tensioner range across Golf, Golf Citi, Jetta, Passat, Polo Classic, Polo Playa, Fox, and Audi 80.
Product Specifications
| Specification | Value |
|---|---|
| Outer Diameter | 72 mm |
| Width | 21 mm |
| Mounting | 10 mm stud hole |
Vehicle Fitment
Includes 72 supplied applications.
View Full Vehicle Fitment (72 applications)
| Make | Model | Engine Code | Power | Years |
|---|---|---|---|---|
| Audi | 80GL 1500 | ZB, ZC | 76.5 kW | 1974–1975 |
| Audi | 80GL GLS 1600 | YP, YN, WY | 79.5 kW | 1976–1981 |
| Audi | 400 1.8 | JW | 81 kW | 1987–1991 |
| VW | Fox 1300 | GY | 75 kW | 1987–1993 |
| VW | Fox 1600 & Tripper | HM | 81 kW | 1987–1995 |
| VW | Fox 1800 Sport | HV | 81 kW | 1990–1995 |
| VW | Golf 1100 L, LS | FA, GG | 69.5 kW | 1978–1981 |
| VW | Golf 1300 GL | GF | 75 kW | 1979–1981 |
| VW | Golf 1300 L, LS | ET | 75 kW | 1981–1983 |
| VW | Golf 1300 | ET | 75 kW | 1982–1985 |
| VW | Golf 1500 Diesel | CK | 76.5 kW | 1977–1981 |
| VW | Golf 1500 GLS | JB | 79.5 kW | 1978–1984 |
| VW | Golf 1600 | FR / EM | 79.5 kW | 1978–1984 |
| VW | Golf 1800 GTi | DX, EV | 81 kW | 1983–1984 |
| VW | Golf 2 1300 CL | GY | 75 kW | 1984–1987 |
| VW | Golf 2 1600 CSL | HM | 81 kW | 1984–1992 |
| VW | Golf 2 1800 CSX, GTX | HV | 81 kW | 1984–1992 |
| VW | Golf 2 1800 GTi | EV, DX | 81 kW | 1984–1992 |
| VW | Golf 3 1600 GS | ACG | 81 kW | 1993–1996 |
| VW | Golf 3 1800 GSX, GTS | ACH | 81 kW | 1993–1996 |
| VW | Golf Citi 1.3 | GY | 75 kW | 1986–1992 |
| VW | Golf Citi 1.3 Chico | GY | 75 kW | 1995–2002 |
| VW | Golf Citi 1.3 Shuttle | GY | 75 kW | 1992–1997 |
| VW | Golf Citi 1.3 Sonic | GY | 75 kW | 1998–1999 |
| VW | Golf Citi 1.4 (Carb) | BBV | 76.5 kW | 2002–2005 |
| VW | Golf Citi 1.4 (Carb) | BSC | 76.5 kW | 2005–2009 |
| VW | Golf Citi 1.4i | AGY | 76.5 kW | 1999–2004 |
| VW | Golf Citi 1.4i | CDP | 76.5 kW | 2004–2010 |
| VW | Golf Citi 1.4i Chico | AGY | 76.5 kW | 2004–2010 |
| VW | Golf Citi 1.4i Rhythm | AGY | 76.5 kW | 2004–2010 |
| VW | Golf Citi 1.4i Xcite | AGY | 76.5 kW | 2009–2010 |
| VW | Golf Citi 1.4i Billabong | AGY | 76.5 kW | 2009–2010 |
| VW | Golf Citi 1.4i Rox | AGY | 76.5 kW | 2004–2010 |
| VW | Golf Citi 1.4i Sport | AGY | 76.5 kW | 1999–2007 |
| VW | Golf Citi 1.4i Storm | AGY | 76.5 kW | 2008–2010 |
| VW | Golf Citi 1.4i Wolf | AGY | 76.5 kW | 2008–2010 |
| VW | Golf Citi 1.4i GTS | AGY | 76.5 kW | 2009–2010 |
| VW | Golf Citi 1.4i Tenacity | AGY | 76.5 kW | 2007–2010 |
| VW | Golf Citi 1.6 | HM | 81 kW | 1985–1999 |
| VW | Golf Citi 1.6i | AFX | 81 kW | 2000–2010 |
| VW | Golf Citi 1.6 Blues | HM | 81 kW | 1996–1998 |
| VW | Golf Citi 1.6 Deco | HM | 81 kW | 1985–2001 |
| VW | Golf Citi 1.6i Life | AFX | 81 kW | 1999–2007 |
| VW | Golf Citi 1.6 Lux | HM | 81 kW | 1996–2001 |
| VW | Golf Citi 1.6i Rox | AFX | 81 kW | 2004–2010 |
| VW | Golf Citi 1.6 Shuttle | HM | 81 kW | 1992–1997 |
| VW | Golf Citi 1.6 Sonic | HM | 81 kW | 1998–2000 |
| VW | Golf Citi 1.6i Sport | AFX | 81 kW | 1999–2007 |
| VW | Golf Citi 1800 | HV | 81 kW | 1988–1995 |
| VW | Golf Citi 1800 CTi | DX | 81 kW | 1991–1995 |
| VW | Jetta 1300 GL | GF | 75 kW | 1980–1982 |
| VW | Jetta 1300 GL, LS | ET | 75 kW | 1982–1984 |
| VW | Jetta 1500 GLS | JB | 79.5 kW | 1980–1985 |
| VW | Jetta 1600 GL, GLS, GLX | EM | 79.5 kW | 1983–1985 |
| VW | Jetta 2 1600 CSL | HM | 81 kW | 1985–1992 |
| VW | Jetta 2 1800 CSX, CLX | HV | 81 kW | 1985–1992 |
| VW | Jetta 2 1800 CLi | EV | 81 kW | 1985–1992 |
| VW | Jetta 3 1600 CSL | ACG | 81 kW | 1993–1999 |
| VW | Jetta 3 1800 CSX, CLX | ACH | 81 kW | 1993–1995 |
| VW | Jetta 3 1800 CSX, CLX F.I. | AFV | 81 kW | 1996–1999 |
| VW | Jetta 3 2000 CLi | 2E | 82.5 kW | 1993–1999 |
| VW | Passat 1300 L, LS | ZF | 75 kW | 1974–1981 |
| VW | Passat 1500 LS | ZB, ZC | 76.5 kW | 1974–1976 |
| VW | Passat 1600 LS | YN | 79.5 kW | 1976–1979 |
| VW | Passat 1600 GL | YP | 79.5 kW | 1981–1985 |
| VW | Passat 1800 CL | JV | 81 kW | 1984–1987 |
| VW | Polo Classic 1.4i | AGY | 76.5 kW | 1996–2003 |
| VW | Polo Classic 1.6i | AFX | 81 kW | 1996–2002 |
| VW | Polo Classic 1.8i | AFV | 81 kW | 1996–2002 |
| VW | Polo Playa 1.4i | AGY | 76.5 kW | 1998–2002 |
| VW | Polo Playa 1.6i | AFX | 81 kW | 1998–2002 |
| VW | Polo Playa 1.8i | AFV | 81 kW | 1999–2003 |
| VW | Golf 1600 LDV Petrol | FR | 79.5 kW | 1981–1986 |
| VW | Golf 1600 Caddy LDV | HM | 81 kW | 1986–2006 |
| VW | Golf 1800 Caddy LDV | HV | 81 kW | 1989–1995 |
Fitment Notes
- Always match vehicle details and engine code before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
Installation / Use / Maintenance Tips
- Compare the new tensioner pulley to the removed unit before installation — confirm outer diameter (72 mm), width (21 mm), and stud hole size (10 mm) match.
- Always replace the timing belt, tensioner pulley, and related idler pulleys as a complete set — mixing old and new components compromises the timing drive and voids warranty.
- Clean the mounting surface and inspect the stud, bracket, and surrounding area for damage or wear before fitting.
- Follow the manufacturer's tightening torque specification and timing belt tensioning procedure during installation.
- After installation, rotate the engine by hand through two full cycles and re-check tension before starting.
Common Questions
Will this tensioner pulley fit my VW Golf Citi?
This timing belt tensioner pulley (TBT8301B) is listed for the fitments shown on this page. Confirm by matching your engine code against the list above and checking the 72 mm OD, 21 mm width, and 10 mm stud hole against your removed unit.
Should I replace the timing belt at the same time?
Yes. Timing belt tensioners should always be replaced together with the timing belt as a complete service — mixing old and new components is not recommended and may compromise the timing drive.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and compare the 72 mm outer diameter, 21 mm width, and 10 mm stud hole to your removed unit. If unsure, request fitment assistance before ordering.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 14 reviews
Sort
Product Reviews
★★★★★ 5
Must for subwoofers. True 2mm spec. High quality.
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
Let me start of by saying WOW! This made a huge difference in the SQ of my L7S pushing 930w rms. Before I had major rattles in my 2020 Honda Civic SI. Taking the time to do this to my trunk and Lid made me realize just how loud my subwoofer actually is. It literally eliminated the rattles throughout my whole car. I still plan on doing this to my doors and rear deck but once I upgrade the speakers. I still have half of the box just doing the trunk and lid so 1 box of 36sf will be enough for most of the areas that need to get done. You may need a little more overall. This is true 2mm spec. Very sticky and easy to apply. It just take time to finish the work correctly and roll it down. It is not as heavy as I thought it was going to be. The size of the sheets are perfect for what you need to do. The value is on point for the quality. It does not rip very easily but you can cut it to size without any problems. Again, This is a must buy for anyone who is pushing 1000w rms or more.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
★★★★★ 5
Good stuff !
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great.
This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over.
It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement.
It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way.
Get it. Use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
★★★★★ 4
Good product
Model: 36 SqFt(3.4 SqM)
Easy to roll out. Works great
Why did you pick this product vs others?:
Fair price for the amount of coverage, good quality
Works well:
Easy to install, rolls out great. Forms to contours well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 13, 2025
★★★★★ 5
Great product
Model: 36 SqFt(3.4 SqM)
I used this on the doors of a Toyota Tacoma, worked as it described. Reduced the road noise significantly.. Need to buy another box for the floor and roof of the truck..
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026