Pay in installments of $295.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
BREMBO Front Brake Disc Lexus IS-F 2UR-GSE (Single) - 09A30011Vehicle Fitment & Part Details Front Brake Disc for Lexus IS F 2UR GSE 2010 2013, cross referenced to OE 435120W060 (Lexus). Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN engine. Key Details SKU 09A30011 Component Front Brake Disc Brand BREMBO Part MPN 09A30011 Primary Fitment Lexus IS F 2UR GSE 2010 2013 Specs Brake Disc Type: perforated vented; Brake Disc Thickness: 30 mm; Number of
Vehicle Fitment & Part Details
Front Brake Disc for Lexus - IS-F 2UR-GSE 2010-2013, cross-referenced to OE 435120W060 (Lexus). Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
Key Details
- SKU
- 09A30011
- Component
- Front Brake Disc
- Brand
- BREMBO
- Part MPN
- 09A30011
- Primary Fitment
- Lexus - IS-F 2UR-GSE 2010-2013
- Specs
- Brake Disc Type: perforated/vented; Brake Disc Thickness: 30 mm; Number of Holes: 5; Height: 65 mm; Centering Diameter: 62 mm; Outer Diameter: 360 mm; Machining: High-carbon; Surface: Coated; Minimum thickness: 28 mm; Tightening Torque: 103 Nm
- OEM References
- 435120W060 (Lexus), 435120W060
Listing Highlights
- Listed for the listed applications applications shown in the fitment section.
- Cross-referenced to supplied OEM reference numbers for compatibility checking.
- Useful for matching by SKU 09A30011 before ordering.
OEM Reference Numbers
- 435120W060 (Lexus)
- 435120W060
Product Specifications
| Specification | Value |
|---|---|
| Brake Disc Type | perforated/vented |
| Brake Disc Thickness | 30 mm |
| Number of Holes | 5 |
| Height | 65 mm |
| Centering Diameter | 62 mm |
| Outer Diameter | 360 mm |
| Machining | High-carbon |
| Surface | Coated |
| Minimum thickness | 28 mm |
| Tightening Torque | 103 Nm |
Vehicle Fitment
Includes 1 supplied applications covering the listed applications.
View Full Vehicle Fitment (1 applications)
| Fitment |
|---|
| Lexus - IS-F 2UR-GSE 2010-2013 |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Verify VIN/engine.
Compatibility Verification Notes
- Match SKU 09A30011 against the original part label, invoice, or supplier reference where available.
- Use the vehicle model, year range and engine details in the fitment section to confirm the application.
- Compare any supplied OEM reference numbers with the original part before ordering.
Common Questions
Will front brake disc fit my Lexus - IS-F 2UR-GSE 2010-2013?
This part (09A30011) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
What OEM part numbers does this cross-reference?
Supplied OEM reference numbers are listed in the OEM Reference Numbers section. Match the reference to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, OE reference numbers, original part details and any listed variant information before ordering. Verify VIN/engine.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 12 reviews
Sort
Product Reviews
★★★★★ 5
Tips and tricks
I watched several videos by professionals who used this. Follow instructions. Make sure the engine is warm before you put it in. Make sure you have everything you need. The biggest tip I got that was repeatedly emphasized by the pros was to buy a “cheap” oil in addition to the new oil. After you run the flush drain the oil and flush. Put the cheap oil in and “rinse” the inside of the engine with the cheap oil. Then drain again. Replace the oil and filter with your good stuff.
I followed these instructions or suggestions and….
I sat in the truck while the flush was running. It’s a 13 year old truck with 150,000 miles. It was running strong but burning oil and kind of loud. Sounded like it was growling. There were some ticking type noises that made me nervous. As I sat in the truck and let the flush cycle through the engine at idle I could literally hear the flush working. Very slowly it was like someone gave the engine a Xanax and you could hear it getting quieter and calming down.
I drained, rinsed with cheap oil only letting the cheap oil run through at idle for another 15 minutes then drained again. The oil flush was clearly important. It didn’t come out as black as the first drain but it looked like old nasty oil.
The truck is no longer burning oil. My gas mileage has increased significantly and it is running so quiet and smooth it’s unbelievable. I used a little less of the liquid Molly flush than it called for regarding the flush to oil ratio. I didn’t want to do something too intense to the inside of the engine. But the results were remarkable. Just as advertised after following the instructions. I also added the liquid Molly oil additive to the final oil change to ‘lube’ the inside of the engine. I plan to do another flush in about 10,000 miles.
All that to say, yes, you won’t be disappointed as long as you follow instructions and a few tips and tricks. My truck is almost running like a brand new truck and again it’s an old and tired truck. I will use this as part of a high mileage maintenance and perform the flush every 50,000 miles or so. I feel confident it will extend the life of my engine based on the results
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2024
★★★★★ 4
Seems to have helped
Bought a used 2020 Jeep Sahara 2 liter turbo charged with 80k miles from a dealership. Dealership had just changed oil the day of purchase. Drove it home 30 miles down interstate and another 20 back roads, it ticked and tapped allot at idle and the dip stick was varnished.
I added the flush, let it idle for 10 minutes and drained it. The new oil from the dealership drained out jet black, no light could pass thru it.
I changed the oil with Walmart oil and a cheap oil filter and let it idle for 5 minutes to clean out all the engine flush, it drained out clean and clear.
I refilled it with Pennzoil Platinum High Mileage oil and a Fram Ultra Synthetic oil filter. It's been a week and the engine is noticeably quieter and smoother since using this product.
If nothing else it cleaned allot of carbon from inside of my engine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 25, 2025
★★★★★ 5
HOLY CRAP!!!!
So my 2005 Durango has a 5.7 and I put on 253,000 miles on it before it blew a head gasket. Since it was summer, iI decided I'd tackle it myself. The upper end was so full of gunk, I can't believe I hadn't had serious issues. Anyway, I apparently dropped some pieces of crud down the oil channels, 'cuz after putting it all back together, I got alarms for low oil pressure. Figuring I'd try anything else before replacing the oil pump, i gave this stuff a try. WOW!!!! Not only did the oil pressure return, the engine runs SO much smoother! I had forgotten how smooth it ran when it was new. The caveat is that apparently the gunk was the only thing keeping some areas from leaking - as it lost oil at a startling rate. 1 bottle of the Liqui Oil Saver though, and within a week the oil leaks completely stopped.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2025
★★★★★ 5
Awesome!!
Had a check engine light come on for cam shaft position. Did some research online about the specific code and found that I could be due to sludge in the engine. Added this and ran for about 30 minutes and then had the oil changed.
The light never came back on and the engine is running smooth and quiet.
Will definitely use again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
★★★★★ 5
Great product
This brand is great. The car is running great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 4, 2026
recommand products
KALEBOL For Huawei Watch GT 3 42mm / GT 3 Pro 43mm Silicone Watch Band 20mm Groove Design Strap
59.03
For Huawei Watch GT 3 42mm Stainless Steel Strap Crown Shape Rhinestone Decor Watch Band
177.18
Framed in White Claude Monet - Etretat beach 70x50
70.99
For Huawei Watch GT 3 42mm Clear Soft TPU Electroplated Full Coverage Anti-drop Watch Protective Case
38.50
She's the Strongest Bride But I'm Stronger in Night Battles A Harem Chronicle of Advancing Through Cunning Tactics Vol. 2
11.99