SKU: 69675463160

Eflite Viper 70mm TrueFire and BlueFire LED Afterburner

Sale price$38.69 Regular price$42.99
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Eflite Viper 70mm TrueFire and BlueFire LED AfterburnerPN 28IN The afterburner is for motor PN EFLM1850. Options Select A Fire TrueFire Random flickering from 30% to 50% throttle to simulate the afterburner lighting turning on. From 50% throttle to 100% throttle the afterburner gets brighter with full brightness at 100% throttle. Select A Fire adds the ability to adjust the throttle position where the main Orange LED turns on. The ability to turn on and off the flickering effect is also provided. Select A

PN 28IN

The afterburner is for motor PN EFLM1850. 

Options

Select-A-Fire TrueFire - Random flickering from 30% to 50% throttle to simulate the afterburner lighting/turning on. From 50% throttle to 100% throttle the afterburner gets brighter with full brightness at 100% throttle. Select-A-Fire adds the ability to adjust the throttle position where the main Orange LED turns on. The ability to turn on and off the flickering effect is also provided.

Select-A-Fire BlueFire - Random blue led ring flickering from 30% throttle to 50% throttle. Center afterburner led is not on during this portion. From 50% throttle to 100% throttle the center afterburner led gets brighter with full brightness at 100% throttle. The blue led ring is on at a lower intensity during this portion. Select-A-Fire adds the ability to adjust the throttle position where the Blue LED starts to flicker. The ability to turn on and off the flickering effect is also provided. 

No additional radio (TX) programming is required to achieve the realistic afterburner effect. This is a plug and play system. 

Includes a 3D printed motor mount, 20" extension wiring from controller to LED, connection to a 6S battery balance port and receiver. We can offer a 4S version if desired. Just let us know. 

An integrated Y cable is provided with the controller to split the throttle signal from the receiver (RX) and provide it to the afterburner controller and the ESC. 

The controller itself weighs 18g.

The dimension listed is for the outside diameter of the motor. The unit can be attached to the motor using a zip tie, Gorilla tape or FoamTac glue. See photos for more information. 

Installation instructions:

1) Remove the motor per the manual instructions. 

2) Attach the afterburner LED unit to the rear of the motor using FoamTac Glue. Tighten zip tie and add Gorilla tape if desired. Leave the FoamTac to set for 24 hours and then you can remove the zip tie if desired.  

3) Route the LED wire to the battery compartment.

4) Connect the LED wire to the TrueFire LED controller.

5) Connect the ESC lead to the Y splitter. One end goes to the receiver throttle port and one to the TrueFire LED controller Throttle connection. 

6) Connect the TrueFire LED controller Battery connector to the balance lead of the battery. 

7) Power on the plane and the transmitter. Make sure your plane is secure prior to adding throttle input. Give it throttle and enjoy the TrueFire! It gets really good around 30% throttle input. 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 69675463160

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 90 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Louis Creed
Los Angeles, US
★★★★★ 5
Smooth as a Kazakh Goat's Milk! Very Nice!
Style: Sport
Wa wa wee wa! I recently use the Cleanlogic Soap Saver Exfoliator, and let me tell you, it is very nice! My wife, she say my skin now feel like a silky milk of a Kazakhstani goat, yes? The exfoliator, it rubs away the dirt like it owes money to my brother Bilo! The soap saver is genius—no more dropping soap like slippery American politician drop the truth! You put the soap in, scrub-a-dub, and poof! Clean like a baby after his first bath in the glorious Aral Sea (before it disappear, very sad). Also, it make shower time much longer—good for avoiding wife! High five! Perfect for the hardworking man who want to feel smooth like a freshly peeled potato. I give this five thumbs up! Jagshemash!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 3, 2024
E
Verified Purchase
Emily Rose
Natrona Heights, US
★★★★★ 3
Very nice
Style: Sport
My husband and I both enjoy these soap savers. We don't find them to be too abrasive and I have sensitive skin. It dries between uses and works as expected. Unfortunately, we met a quality issue when the thinner side of his soap bag ripped within a month. Disappointing. I've deducted 2 stars for this reason.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 21, 2025
R
Verified Purchase
RedBear
Pawtucket, US
★★★★★ 5
Looked for this for quite a while
Style: Bath And Body, Size: 3 Count (Pack of 1)
There are a lot of "Japanese style" exfoliating scrubber "cloth" kind of products around Amazon, and at local grocery and drug stores. Most of them are pretty cheap in construction. One layer, thin, and before long they tend to start coming apart at the edges, leaving long plastic threads everywhere. Strangely, even though they are very thin once you unfold them, they have the ability to retain water droplets in the gaps in the material and stay kind of damp for longer than you might expect. Part of the problem, I think, is that the material is so light that it's difficult to "snap" it well enough to shake the water droplets out of the material. Surface tension holds the tiny droplets between the threads. Anyway, one day I found an exfoliating cloth at the local grocery store, and it was unusually thick and luxurious, and double layered, and nicely sewn at the edges/ends. Although I did not realize at the time that its construction was so unusual. It creates a very thick scrubber full of lather when you scrunch it up, but you can also unfold it and stretch it into a back scrubber. Just like the cheaper versions you can find everywhere, but with a better ability to hold onto lathered soap or body wash, even when it's unfolded. I kept looking for something similar to take with me on trips, because I really liked using it at home. But the cheapo exfoliating cloths I found were all pretty thin and flimsy by comparison. I found a set of cloths that looked kind of similar, but they were very small, and still pretty thin. I looked at the cloth and it had a Cleanlogic tag on it, so I looked for something similar. At the store they had an even bigger/thicker version of Cleanlogic product, with a loop of rope on either end. It's nice for home use, and even easier to use as a huge back scrubber. But I wanted something similar to this moderately thick, stretchy exfoliating cloth that I had found at the store much earlier. Thicker than most of the exfoliating cloths on the market, but still compact enough to pack up in a toiletry kit without taking up too much room. Turns out, it was this. Except it wasn't a three-pack. Haven't found a single-pack. So this may seem a bit steeply priced compared to competing products, but you do get three very substantial cloths that should last a long time. The thing about this exact product is that its thickness and weight allows it to be swung around when it's wet (fold it in half lengthwise first) and you can get most of the moisture out. First, hold it by the ends folded in half, then hold it by the middle and swing it around again for a few seconds, as fast as you can. You'll find it quickly gets much lighter, as the water gets pulled out by centrifugal force. Do a few snaps while holding the middle, and a few snaps while holding the ends together. It will be mostly dry already, and will end up drying just about as quickly as the cheapo plastic cloths do. You may think with the extra thickness that it might be difficult to rinse the soap out when you're done with it. But I haven't found that to be the case. It's about as easy to rinse out as the cheapo variety of exfoliating cloths. Hold it up in front of the shower head, let the water push out the soap and gunk, pull it through your mostly closed hand to wring out the water, and repeat a couple of times. It will be perfectly clean, ready for swinging and snapping the remaining water out. Because of the sewn edges, this won't easily come unraveled or shed, and it's frankly more exfoliating and effective at cleaning anything and everything than the cheapo packs of exfoliating cloths you'll find everywhere. Really glad it had a tag on it with the brand so I could find a new one to travel with. I haven't seen any other brand make them quite this way, after scouring every similar product on Amazon. And yes, the tag is still there even after the cloth has been used extensively. They seem to be pretty durable. The "cloth" form factor is nice because it can scrunch up and be like a sponge, like those poofy body scrubber balls you see everywhere, or fold up or wrap around a hand like an exfoliating glove, or stretch into a back scrubber. But also because unlike thick exfoliating "sponge" form factors that can't change, the cloths have a much better ability to dry out quickly and avoid promoting the growth of bacteria. Very important for something you may need to pack away in luggage for an extended period, shortly after showering.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2023
L
Verified Purchase
Lauren Livengood
Houston, US
★★★★★ 5
Smooth skin & travel
Style: Bath And Body, Size: 3 Count (Pack of 1)
I love these things— great for exfoliation. I like them for travelling as well because they’re much easier to fully wrong out than a typical washcloth or loofa.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 20, 2025
D
Verified Purchase
desiree
Boise, US
★★★★★ 4
Best washcloths for acne prone skin
Style: Bath And Body, Size: 3 Count (Pack of 1)
I’ve been using these wash cloths for many years. I am someone who suffers from occasional body acne and I feel like these do a good job of removing dead skin and oils from off my body to reduce future skin breakouts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 27, 2025

recommand products