SkyRC S65 AC Balance Charger/Discharger

SkyRC S65 AC Balance Charger/DischargerThis is the S65 AC Balancer Charger Discharger from SkyRC. This is a great overall battery charger that will not cost you the earth. It supports 2 4S batteries and can charge almost all battery types on the market currently, including the new LiPo batteries with an end voltage of 4. 35V. You can also connect this charger to your PC for PC control and firmware updates. The S65 is packed with added features such as a Lithium Battery Meter, a Battery

This is the S65 AC Balancer Charger/Discharger from SkyRC. This is a great overall battery charger that will not cost you the earth. It supports 2-4S batteries and can charge almost all battery types on the market currently, including the new LiPo batteries with an end voltage of 4.35V. You can also connect this charger to your PC for PC control and firmware updates. The S65 is packed with added features such as a Lithium Battery Meter, a Battery Internal Resistance Meter on top of added features that make this charger safer to use.

Key Features:

• Suitable for 2-4S batteries
• It can charge over 7 types of batteries (LiPo, LiHV, LiFe, LiIon, NiMH, NiCd, PB)
• Compatible with expansion sensors like a battery temperature sensor, Wifi Module and PC link for extra functionality and safety
• Compact design
• Changes from the SkyRC S60:
  • 65W charging power
  • Higher accuracy battery voltage display
  • New modes for charging different PB batteries
  • Built in XT60 connector

Specifications:

• Input Voltage: AC 100-240V
• Charge Wattage: 65W
• Discharge Wattage: 10W
• BatteryTypes/Cells:
  • LiPo/LiFe/LiIon/LiHV: 2-4 cells
  • NiMH/NiCd: 6-8 cells
  • Pb: 3-6 cells

• Battery Capacity Range:
  • NiMH/NiCd:100-50000mAh
  • LiPo/LiIon/LiFe/LiHV:100-50000mAh
  • Pb: 100-50000mAh
• Charge Voltage: NiMH/NiCd: Delta peak detection
  • LiPo: 4.18-4.25V/cell
  • LiFe: 3.58-3.7V/cell LiIon: 4.08-4.2V/cell
  • LiHV: 4.25-4.35V/cell
• Discharge Cut-off Voltage:NiMH/NiCd:0.1-1.1V/cell
  • LiPo:3.0-3.3V/cell
  • LiFe:2.6-2.9V/cell LiIon: 2.9-3.2V/cell
  • LiHV: 3.1-3.4V/cell
• Charge Current: 0.1A-6.0A
• Discharge Current: 0.1A-2.0A
• Balance Cells: 2-4 cells
• Balance Current: 1000mA/cell Max
• Safety Timer: 1-720minutes off
• Charge Method: CC/CV for lithium types and lead(Pb) batteries Delta-peak Sensitivity for NiMH/NiCd.

Please Note – Power Cable

Depending on stock availability, this charger may be supplied with either a UK plug or an EU plug cable, as we are unable to always guarantee which plug type our manufacturer ships with.

If you require a UK plug cable, you can order one separately below:

• 13A IEC 60320 C7 (Figure-8 / Shotgun) Connector – UK Plug
• 13A Cloverleaf Connector Plug – UK Plug

Optional Extras:

• A temperature sensor cable is available that measures the temperature and terminates the procedure when the temperature limit is reached.
• A WiFi module is also available that allows the user to control and monitor the charger via smart phone.