SKU: 85345102275

Sender XTRM

Sale price$269.98 Regular price$299.98
Save 10%

Pay in installments of $75.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 30 - Aug 4

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Sender XTRMDe YES Sender XTRM Mens Snowboard is een freestyle board voor rijders die hun park serieus nemen. Dit is geen speels instapmodel, maar een stijve, precieze twin voor snowboarders met techniek, kracht en een duidelijke rijstijl. De Sender XTRM is gebouwd voor snelheid, pop en controle bij grote sprongen, technische rails en agressieve landingen. Binnen de YES collectie staat dit board aan de performance kant van freestyle: minder vergevingsgezind, maar

De YES Sender XTRM Men’s Snowboard is een freestyle board voor rijders die hun park-  serieus nemen. Dit is geen speels instapmodel, maar een stijve, precieze twin voor snowboarders met techniek, kracht en een duidelijke rijstijl. De Sender XTRM is gebouwd voor snelheid, pop en controle bij grote sprongen, technische rails en agressieve landingen. Binnen de YES-collectie staat dit board aan de performance-kant van freestyle: minder vergevingsgezind, maar perfect als je weet wat je doet. Rij je hard, druk je tricks af en wil je een board dat direct reageert zonder twijfel, dan past de YES Sender XTRM perfect in jouw quiver.

Waarom de YES Sender XTRM eruit springt

  • Stijve twin flex → maximale pop en stabiliteit → vertrouwen bij hoge snelheid en grote features
  • True Twin shape → identiek gevoel switch en regular → geen verschil in afzet of landing
  • Carbon-versterkte constructie → directe energieoverdracht → scherp en explosief onder je voeten
  • Sintered base → hoge topsnelheid en goede waxopname → blijft snel, ook bij droge sneeuw
  • Multiradius sidecut → voorspelbare grip → stabiel op aanloop en gecontroleerd uit bochten

Voor wie is de YES Sender XTRM – en voor wie niet

De YES Sender XTRM is ideaal voor gevorderde tot expert freestyle riders die hun tijd vooral in het park, op kickers en op technische lijnen doorbrengen. Rijd je krachtig, met snelheid en controle, en zoek je een board dat meewerkt bij agressieve input, dan zit je hier goed.

Minder geschikt is dit board voor beginners, relaxte cruisers of rijders die vooral speels en foutvergevingsgezind willen snowboarden. Ook als je voornamelijk all-mountain of poeder rijdt, zijn er betere, veelzijdigere opties.

Prestaties in de praktijk

Op sneeuw voelt de Sender XTRM strak en precies. Bij aanlopen blijft het board rustig, zelfs op hogere snelheid. De pop is direct en krachtig, waardoor je minder hoeft te werken bij afzet. Landingen voelen stabiel en gecontroleerd, mits je technisch rijdt. Op rails en boxes vraagt het board om actieve input: beloning komt in de vorm van controle en voorspelbaarheid, niet in speels gemak. Buiten het park rijdt hij prima mee, maar je merkt duidelijk dat dit board is gebouwd voor freestyle prestaties, niet voor relaxed rondcruisen.

Technologie & constructie (uitleg, geen jargon)

  • Sintered base
    Een harde, dichte base die wax goed opneemt en snelheid vasthoudt. Je merkt dit vooral op lange aanlopen en bij wisselende sneeuwcondities.
  • Poplar/Paulownia/Bamboo core
    Een combinatie van houtsoorten die het board licht houdt, maar wel stevig en responsief. Dit zorgt voor pop zonder dat het board dood aanvoelt.
  • Triax glasvezel
    Glasvezel in meerdere richtingen voor extra torsiestijfheid. Hierdoor blijft het board stabiel als je hard rijdt of zwaar landt.
  • Carbon verstevigingen
    Toegevoegd voor extra snap en directe respons. Elke beweging wordt meteen vertaald naar het board.

Veelgestelde vragen over de YES Sender XTRM Men’s Snowboard

  • Is de YES Sender XTRM geschikt voor beginners?
    Nee, dit board is duidelijk gericht op gevorderde en expert riders met een actieve rijstijl.
  • Rijdt dit snowboard ook goed buiten het park?
    Ja, maar het voelt het best aan bij snelheid en technische input. Voor all-mountain gebruik zijn er vergevingsgezindere alternatieven.
  • Hoe stijf voelt de flex in de praktijk?
    Zeer stijf en direct. Dit geeft veel stabiliteit, maar vraagt om goede techniek.
  • Is dit board geschikt voor switch rijden?
    Ja, dankzij de true twin shape voelt switch identiek aan regular.
  • Voor welk type freestyle is dit board bedoeld?
    Voor grote kickers, technische park lines en riders die controle en precisie boven speelsheid verkiezen.

Waarom kopen bij GearFreak

Bij GearFreak krijg je geen standaard verkooppraatje, maar advies van riders die dit type snowboard begrijpen en zelf rijden. In onze winkels en online helpen we je eerlijk bepalen of de YES Sender XTRM bij jouw rijstijl past. Die expertise en nuchtere benadering geven net dat

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 85345102275

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 6 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Ed Train
Draper, US
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast. I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers. (I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.) I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers. These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug. I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin. My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs. I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
V
Verified Purchase
V88
Houston, US
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
G
Verified Purchase
Gummy Roach
San Leandro, US
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals. These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together. The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug. I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
K
KBar
Draper, US
★★★★★ 5
Heavy-Duty 4 AWG Cable With Flexible Insulation
Size: 10ft, Color: 4awg
I am satisfied with this 4 AWG cable. The insulation coating is soft, and the cable itself is very pliable, making it easy to bend and route into the configuration needed for installation. Despite the flexibility, it still feels like a heavy-duty cable designed to handle demanding applications. I am using this cable to provide the necessary amperage to start the generator on my trailer, and it performs as expected. I also like that the wire gauge and cable properties are clearly printed along the side of the insulation, making identification easy during installation or future maintenance. The cable arrived in good condition with no obvious odor from the insulation or packaging. Overall, this appears to be a quality heavy-duty cable that is flexible, easy to work with, and suitable for high-current applications.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
H
hazard2k
West Palm Beach, US
★★★★★ 5
True copper battery cables that are high quality
Size: 10ft, Color: 4awg
I love having heavy duty cable on hand for my cars. It's so nice to be able to make your own starter and alternator cables when restoring cars. These cables are 100% copper, not CCA (copper clad aluminum) like many others are. Copper is far superior for conductivity and handling higher loads. The rubber on the cable is thick and yet very flexible..it's clearly marked and seems very durable. I like to use a hydraulic crimping tool and then add marine grade heat shrink tubing with the adhesive inside of it to keep it as weatherproof as possible.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026

recommand products