SKU: 12261381814

SPL Parts 2013+ Subaru BRZ/Toyota 86 Solid Subframe Bushings

$146.70 $163.00
Save 10%
No.2 Bestseller on prudentsource.com >

Pay in installments of $40.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 4 - Aug 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

SPL Parts 2013+ Subaru BRZ/Toyota 86 Solid Subframe BushingsFRS BRZ solid aluminum subframe bushings replace the stock mushy rubber bushings on your Scion FR S and Subaru BRZ to eliminate free play of the subframe relative to the chassis. This prevents the subframe from "bouncing around" under drivetrain torque or suspension load, maintaining optimum suspension geometry and reducing wheel hop. Our slide in shim system allows you to quickly raise or lower the subframe to fine tune the roll center anti squat

FRS/BRZ solid aluminum subframe bushings replace the stock mushy rubber bushings on your Scion FR-S and Subaru BRZ to eliminate free play of the subframe relative to the chassis. This prevents the subframe from "bouncing around" under drivetrain torque or suspension load, maintaining optimum suspension geometry and reducing wheel hop. Our slide-in shim system allows you to quickly raise or lower the subframe to fine-tune the roll center/anti-squat behavior to your preference. Raising the subframe will compensate roll center for a lowered car at the expense of increasing anti-squat. Lowering the subframe will decrease anti-squat at the expense of roll center. Now Formula Drift Regulation Compliant! With the recent regulation change in Formula D, we changed our kits to comply. You can maintain OEM height and be perfectly legal. Our SPL SOLID series bushings are precision CNC machined from billet 6061 aluminum for an accurate fit. This kit also includes optional rubber isolation washers to reduce noise transfer from the subframe to the chassis. Sold as a complete kit for one car. Made in the USA. Application: 2013+ Scion FR-S/Subaru BRZ/Toyota GT86 Installation Instructions: SPL Solid Subframe Bushings FRS/BRZ/FT86

  • Proudly made, engineered, and assembled in the USA.

This Part Fits:

Year Make Model Submodel
2013-2016 Scion FR-S Base
2013-2020,2025 Subaru BRZ Limited
2013-2019,2025 Subaru BRZ Premium
2015 Subaru BRZ Series.Blue
2019 Subaru BRZ Series.Gray
2016 Subaru BRZ Series.HyperBlue
2017 Subaru BRZ Series.Yellow
2018,2020,2025 Subaru BRZ TS
2017-2020 Toyota 86 Base
2018-2020 Toyota 86 GT
2020 Toyota 86 Hakone Edition
2017 Toyota 86 Special Edition
2019 Toyota 86 TRD Special Edition
2023 Toyota GR86 10th Anniversary Special Edition
2022-2026 Toyota GR86 Base
2025 Toyota GR86 Hakone Edition
2022-2026 Toyota GR86 Premium
2024 Toyota GR86 TRUENO Edition
2026 Toyota GR86 Yuzu Edition
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 12261381814

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Levi Payne
San Leandro, US
★★★★★ 5
Too big for a tiger, but works well on the fiddy
Color: 4*2.5in Cube LED Pod
Not as bright as the graph says they are, or maybe I'm not in a dark enough area at night. But they definitely are blinding. Were too big for my adv bike unfortunately, but they work good on my truck as ditch lights. Not too bulky looking like the cubes are and no wind noise that I can hear. Definitely lights up the wma trails and the side shooters are very helpful. I will note though that as soon as your hood gets dusty it becomes blinding from the inside side shooters though. so I painted the yellow lens cover on the inside sides and it helps a lot with the hood glare.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026
S
Verified Purchase
Scott Liske
Natrona Heights, US
★★★★★ 5
Bright
Color: 7*5in Cube LED Pod
Very bright, good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
R
Verified Purchase
Riik
Alexandria, US
★★★★★ 5
Easy to install
Color: 4*2.5in Cube LED Pod
Definitely more than I expected. .. dang good product and easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2026
R
Verified Purchase
rkruz
San Leandro, US
★★★★★ 4
Easy Install Onto Jeep JKU, No Switch Backlight or Mounting Holes, Great Customer Service
Color: 5in Cube LED Pod, Color: 5in Cube LED Pod
I installed the Auxbeam 5" 168W LED Cube Pods onto my Jeep JKU Anniversary Steel Bumper. It was an easy install with some YouTube videos to help me snake the cables into the cab. The unused holes in the steel bumper were the perfect size to fit the mounting bolts on the pod lights, and there was plenty of room to reach under the top edge of the bumper to install the nuts with some Loctite. To snake the provided cable through the firewall, I had to remove the installed socket. This was easy to do by simply recessing the retainer clip on each pin, taking a picture of the wired connector before releasing the wires so I knew how to reassemble, snaking the connectorless cable through the firewall into the cab where the pins were then reinserted and locked into the connector. I dressed the cable by zip tie to the existing wire harness at the top of the engine bay. In the cab, I pulled the side panel from the dash (driver's side) and made a small hole for the cable in the panel. After cleaning the dash with alcohol, the adhesive-backed switch seems to hold nicely in place. The lights were very bright and did a great job of illuminating the front and sides of the trail ahead of me. No backlight on the switch, which is a necessity, and I dont understand why that feature is not present. Also, there is no through hole to mount as the adhesive back won't stay attached, so the lack of a mounting hole is a big negative as well. 5 Month UPDATE: One of the lights got water inside. I noticed two screws that hold the glass cover were loose on the bottom of both sides. The other light also had the same loose screws but no water under the glass. I contacted Auxbeam, and they replaced the entire set in 2 days. Very awesome customer service.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 25, 2023
K
Verified Purchase
Kevin Sanguansukdikosol
Houston, US
★★★★★ 5
Brightness and quality
Color: 4*2.5in Cube LED Pod
Got this for my 2024 Crosstrek. Got this one specifically due to its functionality that I wanted, quality for the price and it looks great especially DRL. I leave the Amber cover on most of the time. If you want the DRL to be on while the car is on, you can do that but it has to be rewired which I did. Love the brightness. I’ve been having this on my Crosstrek for a few months now and have no issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026

recommand products

Fire in My Eyes
61.50
The Complete Nonsense and Other Verse
52.30
Amenti Oracle Feather Heart Deck and Guide Book
66.70
The Paris Secret
40.60
Yukon Gear U/Joint Strap Bolt For 14T / 7.5in / and 8.5in GM
32.99