Pay in installments of $30.24 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 1 - Aug 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Kidde Slick 4x 2SFWR Optical Smoke & 1x 3SFWR Heat Alarm Kit Mains Powered with Sealed-In Rechargeable Battery Back-UpKidde Slick 4x 2SFWR Optical Smoke & 1x 3SFWR Heat Alarm Kit Mains Powered with Sealed In Rechargeable Battery Back Up FULLY COMPLY WITH THE NEW 2022 SCOTTISH & WELSH REGULATIONS 4x Mains Powered Optical Smoke Alarm (2SFWR): Mains Optical Smoke Alarm Features: Mains powered Optical smoke alarm from the Slick range of fast fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms. Optional wireless capability using Wireless
Kidde Slick 4x 2SFWR Optical Smoke & 1x 3SFWR Heat Alarm Kit Mains Powered with Sealed-In Rechargeable Battery Back-Up
FULLY COMPLY WITH THE NEW 2022 SCOTTISH & WELSH REGULATIONS
4x Mains Powered Optical Smoke Alarm (2SFWR):
Mains Optical Smoke Alarm Features:
Mains-powered Optical smoke alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
Optional wireless capability using Wireless Alarm Base (RF-SFTP) for wire-free interconnection.
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).
- Unique fast-fit system with separate base plate, for ease of fitting and maintenance
- Integral, double-decker screwless terminal block for fast, push-fit connection
- Auto reset after activation
- Separate Test and Hush buttons to test and temporarily silence nuisance alarms
- Sealed-in rechargeable Lithium cell for 6 months continuous operation in event of mains failure
- Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarms using ‘Smart Interconnect’ technology
- Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
- Wireless capability – use with optional Wireless Alarm Base (RF-SFTP) for RF interlink function
- Deep Base – allows easier wiring
- Tamper-proof batteries – sealed-in to prevent removal
Mains Optical Smoke Alarm Specification:
- Model 2SFWR
- Power Supply 230V mains powered with rechargeable sealed-in Lithium cells
- Temperature Range 0ºC to +40ºC
- Humidity Range Up to 93% Relative Humidity (RH) non-condensing
- Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
- Alarm Dimensions 135 x 135 x 60mm (including ‘Slick’ mounting base)
- Alarm Weight 247g
- Warranty 10 years (including batteries)
- Approvals BSI certified to BS EN14604:2005
- CE tested and certified
- Associated Standard BS 5839 Part 6 Grade D
- Sensor Optical chamber with insect-resistant width slot entry inlet portals
- Chamber Size 41mm outside diameter x 16mm approximate depth (external)
- Sensitivity Complies with BS EN14604:2005
- Detection Band infrared light wavelength
- Button Test Simulates the effect of smoke within the sensing chamber, checks electronics and sounder
- Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
- Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
- Power Consumption Maximum 80mA
- Battery Back-up Non user-replaceable 4 x 3V rechargeable Lithium cells (ML 2430)
- Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
- Low Battery Warning 30-day low battery indicator
- Power-on Indicator Continuous green LED
- Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
- Sound Output 85dB (A) minimum at 3 metres
- Alarm Frequency 3.2 kHz typical
- Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
- Red LED flashes once every 10 seconds = unit in hush condition, auto reset after 7 minutes
- Red LED flashes once every 35 seconds = normal quiescent operation
- Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
- Up to 15 units can be wireless interconnected using appropriate Wireless Base RF-SFTP
- Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
- Fixing ‘Slick’ mounting deep base as supplied
- Base Cable Connect. Screwless Terminal Block with slot release feature for conductors
1x Mains Powered Heat Alarm (3SFWR):
Mains Heat Alarm Features:
Mains powered heat alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
Optional wireless capability using Wireless Alarm Base (RF-SFTP) for wire-free interconnection.
Ionisation alarms are for use in areas where there is danger from fast-flaming fires.
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).
- Unique fast-fit system with separate base plate, for ease of fitting and maintenance
- Integral, double-decker screwless terminal block for fast, push-fit connection
- Auto reset after activation with latching LED allowing the initiating alarm to be identified
- Separate Test and Hush buttons to test and temporarily silence nuisance alarms
- Sealed-in rechargeable Lithium cell for 6 months continuous operation in event of mains failure
- Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarms using ‘Smart Interconnect’ technology
- Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
- Wireless capability – use with optional Wireless Alarm Base (RF-SFTP) for RF interlink function
- Deep Base – allows easier wiring
- Tamper-proof batteries – sealed-in to prevent removal
Mains Heat Alarm Specification:
- Model 3SFWR
- Power Supply 230V mains powered with rechargeable sealed-in Lithium cell
- Temperature Range 0ºC to +40ºC
- Humidity Range Up to 93% Relative Humidity (RH) non-condensing
- Storage and Transport -20oC to +60oC and 5 – 95% relative humidity (RH) non-condensing
- Alarm Dimensions 135 x 135 x 60mm (including ‘Slick’ mounting base)
- Alarm Weight 240g
- Warranty 10 years (including battery
- Approvals BSI certified to BS5446 Part 2:2003
- CE tested and certified
- Associated Standard BS 5839 Part 6 Grade D
- Sensor Thermistor (Thermal resistor) within detection unit
- Sensitivity Complies with BS 5446 Part2:2003, as a Class A2 device, alarms between 54ºC and 70ºC
- Button Test Simulates the effect of heat at the sensor, checks electronics and sounder
- Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
- Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
- Power Consumption Maximum 80mA
- Battery Back-up Non user-replaceable Lithium Polymer Cell
- Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
- Low Battery Warning 30-day low battery indicator
- Power-on Indicator Continuous green LED
- Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
- Sound Output 85dB (A) minimum at 3 metres
- Alarm Frequency 3.2 kHz typical
- Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
- Red LED double flashes every 30 seconds = unit is triggering unit (press test button to unlatch)
- Red LED flashes once every ten seconds = in hush condition (auto-reset after 7 minutes)
- Red LED flashes once every 35 seconds = normal quiescent operation
- Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
- Up to 15 units can be wireless interconnected using appropriate Wireless Base RF-SFTP
- Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
- Fixing ‘Slick’ mounting deep base as supplied
- Base Cable Connect. Screwless Terminal Block with slot release feature for conductor
Please note: Alarms are sold individually.
Data Sheet:
Data Sheet for 2SFWRData Sheet for 3SFWR
Instruction Manual:
Instruction Manual for 2SFWRInstruction Manual for 3SFWR
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 30 reviews
Sort
Product Reviews
★★★★★ 4
Great, soft, high-quality pillows, but too thick for me
Size: Standard (Pack of 2), Style: Soft, Configuration: Pillow
This will be a brief review of my pillow journey. I tried a few of the most popular pillows, like MyPillow, Amazon Basics, bamboo/shredded foam, memory pillows, but my most common complaint about them were that they were all just too high and firm for me. I am a restless sleeper and alternate between back, side, and stomach sleeping, and I strongly preferred the stomach sleeper/flat pillows with a polyester fiber/down alternative filling.
Here's a ranking of my 4 top pillows:
Eversnug Adjustable Layer Pillows - (#1)
These were THE pillow for me. I had never heard of these pillows or the company, but I really like being able to adjust my pillow. These pillows came with 2 small, 2 medium, and 2 large pillows and 2 twin zippable pillow pouches. All of them were polyester fiber filled and somewhat flat and soft, but not lumpy. The pillows may not come the exact same sizes, but they are close enough for me. These are the pillows I ultimately decided to stick with, despite being slightly more expensive than the others at $50 for a set of 2 pillows.
Nappler Bamboo Shredded Memory Foam Pillow - (#2)
Before I found the Eversnug pillows, I was trying the adjustable bamboo shredded memory foam ones. These were my go-to whenever I was testing pillows I didn't like very much. The only downside to these pillows is that if you don't add enough filling, you could feel the edges of the shredded foam. Also, the "bamboo" cover was way too warm and the inner zipper would get too easily caught.
Amazon Basics Down Alternative Pillow - (#3)
I don't think I've ever been disappointed by an Amazon Basics product yet. These pillows were soft, amazing pillows, but they were 1-2 inches too thick/firm for me.
MyPillow - (#4)
Despite all the hype around these, they were too lumpy and 1 inch too thick for me.
Like I said previously, I ended up going with the Eversnug Adjustable pillows, which I absolutely adore. A tiny bonus is that you can take the pillows you don't use and rest them on your sides or between your knees for some extra cushioning.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 12, 2023
★★★★★ 5
Good price and pretty comfortable
Size: Standard (Pack of 2), Style: Soft, Configuration: Pillow
These down alternative pillows are incredibly soft and comfortable, especially for stomach and back sleepers. The soft density gives just the right amount of support without feeling too firm or too flat. I’ve been sleeping much better since switching to these pillows, and they stay fluffy throughout the night.
I also love that they’re hypoallergenic, so there’s no irritation or overheating while sleeping. The standard size fits perfectly in my pillowcases, and the white color looks clean and fresh. Getting a 2-pack at this quality is a great value. Highly recommend for anyone looking for cozy, hotel-style pillows at an affordable price!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
★★★★★ 5
Comfortable Pillows
Size: Standard (Pack of 2), Style: Soft, Configuration: Pillow
These pillows have a nice soft feel and are so comfortable. They’re supportive without being too firm, so my neck feels comfortable throughout the night. They’re lightweight, fluffy, and easy to adjust for different sleeping positions. The material feels smooth and well-made, and the pillows hold their shape better than I expected for the price. They use some alternative fill instead of real feathers which is good for people with allergies.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
★★★★★ 3
Mid range quality
Size: Standard (Pack of 2), Style: Soft, Configuration: Pillow
They work for kids who aren’t picky. Size fit twin bedding well. Look nice and clean. Quality is mediocre. It wasn’t filled very much even after giving time for it to breathe and fluff. Kind of lumpy and lopsided.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 28, 2026
★★★★★ 5
Great pillows!
Size: Standard (Pack of 2), Style: Soft, Configuration: Pillow
I bought these to exchange some old pillows on my son's bed and let me tell you.. they are so soft he fell asleep almost instantly! They keep him nice and cool during the night, they have kept their shape so far and they support your neck perfectly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026