,
and
Promo Codes Available:
Simplicity in Integration
The CI 980 offers a choice of DC trigger or signal-sensing auto on with auto shut-off. Our signal sensing circuit employs a sophisticated music sensing circuit to prevent the false triggers common with noisy source components, or other types of interference noise like RF leakage or ground loops. Rack install is made neat and efficient, thanks to inputs and triggers that offer daisy chain outputs.
System Suggestion
Combine the CI 890 with the CI 580 V2 4- zone BluOS rack mount streamer or the Bluesound NODE to create a complete hi- res multi-room package of incredible value and quality. Or match it with the T 758 V3i and T 778, utilizing their additional pre-outs to power additional effect channels or a 2nd zone, the power and performance of the CI 980 is perfectly matched for this use.
Key Features
- 8 Channels x 50 Watts @ 8 Ohms
- Bridgeable to 4 channels X 120 Watts @ 8 Ohms
- Effectively handles long cable runs and difficult speaker loads
- 4 stereo RCA inputs with loop through
- Global Input/Output
- Input gain adjustment for all zones
- Stereo/mono/bridge mode selector for each zone
- 2U Rack height
- Indicator lamps for each zone that show protection status and amplifier clipping
- 5W Standby Mode
- Thermostatic fan cooling with front vents
- Universal voltage Power Supply to accommodate marine installations
- Multiple Power-up options including Auto Sense turn on and 12V trigger
- Rack ears included
SPECIFICATIONS
Key Features
- Eight channels of clean, low distortion power set up in four stereo zone configuration
- 50W x 8 @ 8 Ohms; 60W x 8 @ 4 Ohms; 120W @ 8 Ohms in Bridge Mode
- Universal voltage to accommodate marine or avionics installations
- Compact 2U rack height with rack ears
- Phoenix speaker connection blocks
- Detachable power cable for easy service and upgrades
- Indicator lamps for each zone that show protection status and amplifier clipping
- <0.5W standby consumption
- <0.03% THD; <0.04% IMD (SMPTE, CCIR)
- >86dBA referenced to 1W
Overall Specifications
- Continuous Output Power
- 8 Ohms
- 8 x 50W (ref. rated THD, 20Hz-20Hz, all channels driven)
- 4 Ohms
- 8 x 60W
- 8 Ohms Bridge Mode
- 120W
- Rated THD (250mW to rated power, CCIF IMD, DIM 100)
- <0.03% (ref. 20Hz-20kHz)
- Clipping Power
- >155W (ref. 1kHz, 8 Ohms, 0.1% THD)
- Damping Factor
- >150 (ref. 8 Ohms, 50Hz and 1kHz)
- Input Sensitivity
- 1.1V (ref. rated power)
- Voltage Gain
- 33dB
- Frequency Response
- 20Hz-20kHz ±1dB
- Signal/Noise Ratio, A-Weighted
- >80dB (ref. 1W/8 Ohms)
>100dB (ref. 50W) - Miniumu Input Signal to Trigger (auto sense mode)
- >20mV
- Time to Automatic Standby (without signal at input sense mode)
- 10 minutes
- Rated Power
- 600W (120V 60Hz, 230V 50Hz)
- Idle Power
- <26W
- Standby Power
- <0.5W
Weight & Dimensions
- Gross Dimensions* (W x H x D)
- 483 x 105 x 323mm (19 1/16 x 4 3/16 x 12 3/4”)**
- Net Weight
- 5.72kg (12.6lb)
- Shipping Weight
- 7.1kg (15.65lb)