SKU: 47201148686

Enhanced Protection- 5-Year Warranty

$18.00 $20.00
Save 10%
No.2 Bestseller on prudentsource.com >

Pay in installments of $5.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 6 - Aug 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Enhanced Protection- 5-Year WarrantyFor just $20, you can extend your warranty to 5 years on your purchase, originally valued at $159. With your regular order, you'll automatically receive a 2 year warranty and a 30 day return exchange policy. Warranty Details: Product warranty: If there is any product failure during the warranty period, please contact us at the first time support@hermanlamps. com. Send us the product problems you encounter in the form of pictures or videos. Our

For just $20, you can extend your warranty to 5 years on your purchase, originally valued at $159. 

With your regular order, you'll automatically receive a 2-year warranty and a 30-day return/exchange policy.

Warranty Details:

Product warranty: If there is any product failure during the warranty period, please contact us at the first time [email protected]. Send us the product problems you encounter in the form of pictures or videos. Our customer service representative will reply within 12 hours. We will communicate specific issues with you. If it is a part problem, we will mail (express transportation) new parts for replacement free of charge (we will provide 5-6 additional spare parts in the packaging of all products). In case of poor product contact due to improper early installation, our technical experts will also solve your problem within 12 hours (We strongly recommend that you choose professional lighting personnel for installation).
 
Note:Replacements do not entail sending an entirely new product. If the other parts of the fixture (e.g., crystals, screws, bulbs, etc.) are intact, we will only resend the defective components. Kindly ensure proper care and storage of the fixture while waiting for the replacement parts. Please understand that product problems caused by man-made damage or natural disasters do not comply with our warranty policy. We are very happy to solve customers' problems because we attach great importance to customers' product experience.

If you encounter any issues during the warranty period, please contact us for assistance. Don’t miss this opportunity to secure your purchase with extended peace of mind!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 47201148686

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Rick
San Leandro, US
★★★★★ 5
Easy to use
Works great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
S
Verified Purchase
Steve M.
Natrona Heights, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Birmingham, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Natrona Heights, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
G
Verified Purchase
Greg
Waukegan, US
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024

recommand products

60 Percent Over LML Duramax Fuel Injector Each 2011-2016 Core Charge Applies Of 150 Each S&S Diesel
254.15
150 Percent Over LBZ Duramax Fuel Injector Each 2001-2004 New Core Charge Applies Of 150 Each S&S Diesel
343.20
100 Percent Over LBZ Duramax Fuel Injector Each 2001-2004 Reman Core Charge Applies Of 150 Each S&S Diesel
291.46
NEW - OEM Genuine Front Right Interior Door Handle For 2007-2012 Mazda CX-7
35.95
60 Percent Over Early 5.9 Fuel Injector Reman Set Of 6 Core Charge Applies Of 900 S&S Diesel
1365.00