Ships within 48 hours · Estimated delivery Aug 2 - Aug 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Girodisc Rear 2-Piece Floating Rotor Set - F8x M2, M3, M4 W/ Silver/Red/Gold CalipersGirodisc is a Braking Technology Company dedicated to developing the best quality high performance braking components and solutions. The company has been in business since 2003 and is guided under the direction of company Principal Martin Meade, who spent five years as an Engineer with Porsche Engineering Services, where he played a role in developing current Porsche technology. PRODUCT INFORMATION The Girodisc system is a direct replacement for the
Girodisc is a Braking Technology Company dedicated to developing the best quality high performance braking components and solutions. The company has been in business since 2003 and is guided under the direction of company Principal Martin Meade, who spent five years as an Engineer with Porsche Engineering Services, where he played a role in developing current Porsche technology.
PRODUCT INFORMATION
The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.
The central hat section of the Girodisc rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to their own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.
Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Sold/priced per pair.
Fitment Information
This application is only for F87 M2 & M2 Competition Coupe, F80 M3 Sedan, F82 M4 Coupe and F83 M4 Convertible models, including Competition, CS and GTS, equipped with optionalS2NK M Carbon Ceramic brake package (gold calipers)orS2NH M-Sport brake package (red or silver calipers).
The Girodisc iron rotors replace the factory carbon ceramic rotors with no modifications necessary. We strongly recommend changing pad material to one suitable for iron rotors.
The primary purpose of the Girodisc system is to reduce unsprung and overall vehicle weight. The secondary purpose is to increase the ventilation and cooling capacity of the brake disc while retaining it's original dimensions. This is accomplished by using two-piece disc construction. The central “hat” section of the disc is made from 6061-T6 aircraft specification aluminum.
The disc is made from cast iron, to the same specification and material as used by professional racing organizations. It is a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The rotor and hat have a floating mount system, which utilizes high strength alloy steel drive pins, manufactured by Girodisc to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring clips on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.
Important Questions Answered
What is required to install the Girodisc system?
The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers and pads perfectly. Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Some discs are larger in diameter and come with caliper spacers. If longer bolts are required, they are also supplied.
How does reducing weight of the braking system benefit the vehicle?
The Girodisc will generally weigh between 4 – 8 lbs less than the oe disc it will replace. This is due to the heavy cast iron hat section being replaced with lightweight, high strength aluminum. The mass of any vehicle requires energy to accelerate or decelerate. Reducing the vehicle mass improves acceleration, and requires less energy to be dissipated during deceleration. Rotating mass requires additional energy in order to increase or decrease its speed of rotation. Decreasing the mass of the disc has a great benefit due to reduction in rotational inertia. This will allow more of the braking force to be available to decelerate the vehicle, not the disc.
Additionally, the mass of the brake system is also unsprung mass. Reducing the unsprung mass has the additional benefit of improved suspension performance, resulting in enhanced ride and handling. Rotating masses require additional energy to vary the plane on which they turn. The lighter the disc, the quicker the response of the vehicle steering due to the reduction in gyroscopic effect/rotational inertia of the disc. As an example, compare the weight of the Ferrari 360 OE disc at 18.2 lbs, and the Girodisc at 14 lbs. The Girodisc is 4.2 lbs lighter per disc. Replacing all four discs will save 16.8 lbs of rotating, unsprung mass.
Why slotted discs?
The edges of the slots continuously clean and refresh the pad surface. This will allow the pads to have a maximized friction surface always available. Additionally, they prevent containments from collecting between the pad and disc interface. The disc is lightened, decreasing its rotational inertia. Slots prevent the formation of a water film on the disc in wet weather, maintaining the best brake response.
A note on drilled discs
Girodisc doesnotrecommend drilled discsfor high performance applications. The rapid heating and cooling cycles will cause cracking on the friction surface of a drilled disc. The use of high friction or racing pads will exaggerate this condition. Most pad manufacturers specifically recommend that their race pads not be used on a drilled disc for this reason. Girodisc can drill discs for an additional fee, if the customer is aware of the potential hazards of drilling the discs.
Note as example the cracking in this OE Ferrari 550 drilled disc after one track day. Also note this custom front disc of a Porsche 993 Turbo after hard use (see photos).
Please see photos attached
Should new discs and pads be bedded in and if so, how?
The answer is yes, for optimum performance, any time different friction materials or discs are introduced, a bedding procedure should be carried out.
Which direction should the discs rotate?
For maximum airflow and superior cooling, the Girodisc system uses curved vanes. For a curved vane internally vented disc, the geometry of the vanes dictates the direction of rotation. A curved vane disc must be installed with the vanes running back from the inside to outside diameters in the direction of rotation. Your discs will come with labels indicating their correct placement on the vehicle. Orienting the disc in this manner creates a centrifugal pump. The rotation of the disc causes air to be pumped from the center of the disc, through the vanes, and out through the outside diameter of the disc. This greatly enhances the disc’s ability to dissipate heat. Discs installed backwards have very limited cooling.
Models
2 Series / F87 M2 (2016-2021) / M2 Competition
2 Series / F87 M2 (2016-2021) / M2
2 Series / F87 M2 (2016-2021) / M2 CS
3 Series / F80 M3 (2014-2019) / M3
3 Series / F80 M3 (2014-2019) / M3 Competition
3 Series / F80 M3 (2014-2019) / M3 CS
4 Series / F82 / F83 (2014-2019) / M4
4 Series / F82 / F83 (2014-2019) / M4 Competition
4 Series / F82 / F83 (2014-2019) / M4 CS
4 Series / F82 / F83 (2014-2019) / M4 GTS
Shipping Notes
Free Standard Shipping on $100+ Orders to the USA.
Except Preorder products are shipped in 48 hours.
Delivery to the USA:
Standard Shipping : 3-10 business days
If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Love this sink caddy. It organized all of my odds and ends that were spread out on my sink counter. I love the way it looks.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026
R
Verified Purchase
Ryan Bennie
Charlottesville, US
★★★★★ 5
Best bang for buck
Color: Black
Best sink caddy Ive had, it dries really fast and even fits in my small kitchen, assembly was a breeze and Ive gotten complements on how great it looks. Its a great size to organize my brushes and soaps in my kitchen and bathroom. Easy to clean and maintain.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 3, 2026
M
Verified Purchase
MBechtold
Alexandria, US
★★★★★ 5
Holds a lot, doesn't soak my countertop
Color: Grey, Color: Grey
Where has this wonderful organizer been all my life? I've always struggled with keeping those little suction-cup organizers reliably attached to the walls of stainless steel sinks -- after a while the cups always fail. But this organizer is just large enough and has room for every scrubbing item I want to grab in a hurry. And there's never water pooling under the organizer and soaking the granite countertop because there are little foam feet on the underside. It even looks classy. I just love it! Only time will tell if this organizer is durable. So far I haven't had to clean it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 14, 2026
J
Verified Purchase
Jennybgood777
Bozeman, US
★★★★★ 4
Almost perfect sink caddy
Color: Black, Color: Black
My old reliable sink caddy had rusted through and I ordered 3 different replacements that I ended up returning. You would think a sink caddy would be very straightforward and simple - however I had certain things I needed out of it.
What I like-
-the large size. I don’t love having a million soaps but my husband recently got diagnosed with psoriasis on his hands. We tried Castile soap and water in a pump, and several free and clear types. He’s always working in the yard or cooking and we need them ALL out and accessible. Plus needed room for our actual dish washing soaps and brushes. Even if you have a normal amount of soaps - you could easily display a spray or other cleaner to fill this caddy up.
-the tray. This one was important. I returned several others bc their plastic tray or absorbing stone bottoms were too small. The caddy would overhang and your soaps would trip out over past them. This stone tray has a little lip that goes all the way around like a border for your caddy. Most of the drips of water stay confined to the tray. (Unless you have splashy kids washing hands & dripping everywhere). But it’s mostly contained.
-absorbing tray. This tray does not require you to empty the water out each day so it doesn’t over fill. It absorbs the water. I don’t know how. Maybe magic. But it doesn’t over fill and it doesn’t leak on the counter. If you have dirty splashes or a dirty scrub brush dripping down - it can leave some brownish marks. I take my soap out once a week and wash the caddy down and scrub the tray and it’s good as new. They included a small sand paper to use if the tray ever loses its absorbing power- you can lightly sand the stone and it’s supposed to open up the pores and be more absorbent again. I’ve only had mine a month and it’s not been an issue yet.
The tall, removable brush caddy - while I do wish it was a teensy bit taller - it’s still taller than any others I tried. Your brush will have to lean a bit unless you have multiple brushes helping to hold it up. We basically use one brush and a straw cleaner and I have doubles of each. I keep 1 set out and 1 set in my dishwasher and I switch them every day. But there is room so if you need bottle brushes or scrubbers you could fill it up. You can also remove that little basket entirely if you want. And it has a hook on the back of it so if you prefer - you can hang it off the front of the caddy instead and have it overhanging over your sink instead.
My sink is very rounded and it’s tough to display a caddy so that the soap is all accessible but it’s also not overhanging too much. The weight of the under stone tray doesn’t allow it to tip over into the sink or move. They also included sticky protective pads for the bottom of your stone which protects your counter tops and also makes it non slip.
Over all I love and am very happy. I hope it doesn’t rust over time. But I would purchase it again. And if they made attachments for it or taller brush basket add ons I would purchase those too. Thanks for reading my ridiculously long review for a simple sink caddy. But if you’re very particular about things like me, I hope it helps!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
L
Verified Purchase
Lola
Lexington, US
★★★★★ 5
No clutter!
Color: Black
I bought this because we had a clutter of soaps, sponges around the sink... My husband was happy I made this purchase! One place for all the items!
,
and
Promo Codes Available: