Pay in installments of $48.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 3 - Aug 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
8 - Lug Wheel SpacersPremium 8 lug Wheel Spacers True 6061 forged aluminum. Grade 12. 9 studs. Front hub centric options available. Order quantity of 2 for a pair or 4 for a full vehicle set. These are the preferred and recommended wheel spacers for truck owners who want strength, proper fitment, and hardware they can trust. Built from true 6061 forged aluminum and machined for a precise fit, these spacers are made for daily driven trucks, tow rigs, lifted builds, and off
Premium 8 lug Wheel Spacers
True 6061 forged aluminum. Grade 12.9 studs. Front hub-centric options available.
Order quantity of 2 for a pair or 4 for a full vehicle set.
These are the preferred and recommended wheel spacers for truck owners who want strength, proper fitment, and hardware they can trust. Built from true 6061 forged aluminum and machined for a precise fit, these spacers are made for daily driven trucks, tow rigs, lifted builds, and off-road setups that need more clearance and a better stance.
Each spacer is built with pressed-in Grade 12.9 wheel studs and backed by a lifetime stud warranty with proof of purchase.
Key Specs
- Sold individually per wheel
- Order quantity of 2 for a pair
- Order quantity of 4 for a full vehicle set
- Available hub-centric & Lug Centric options: 1.5", 2", 2.5", and 3"
- True 6061 forged aluminum construction
- Pressed-in Grade 12.9 wheel studs
- Lifetime stud warranty with proof of purchase
- Finish may vary between silver or black
Important Fitment Notes
Ford hub-centric spacers are for front wheel use only. If you need rear axle parts, please call before ordering.
The only hub-centric spacers offered are 8x170 hub-centric options. Hub-centric is available in 2", 2.5", and 3" sizes. If hub-centric fitment is needed, make sure that option is selected or specified before ordering.
Do not order spacers listed as lug-centric if you need hub-centric fitment.
Most aftermarket wheels are lug-centric, so there is usually no need to order hub-centric spacers unless you are running factory flat lug nut wheels.
Ford owners: If your axle shaft flange outer diameter is over 118mm, these hub-centric spacers will not clear.
General Ford stud thread rule:
- 1999–2002 Ford trucks commonly use 14x2 studs
- 2003+ Ford trucks commonly use 14x1.5 studs
Installation
- Confirm the spacer bolt pattern, stud thread, spacer thickness, and hub fitment before installation.
- Park on a level surface, safely lift the truck, and support it with jack stands.
- Remove the wheel and clean the hub mounting surface. Remove rust, dirt, paint buildup, or debris so the spacer sits completely flat.
- Place the spacer onto the factory studs and make sure it seats fully against the hub.
- Install the supplied lug nuts onto the factory studs and tighten them evenly in a star pattern.
- Torque the spacer to the same torque spec used for the wheels being installed.
- Check that the factory studs do not stick out past the face of the spacer. If they do, the wheel must have proper relief pockets or the studs must be addressed before installing the wheel.
- Install the wheel onto the spacer studs and tighten the wheel lug nuts evenly in a star pattern.
- Torque the wheel to the correct wheel torque spec.
- After a short period of driving, re-torque both the spacer and wheel. Spacers can settle after initial installation.
- Continue checking torque as part of normal wheel maintenance.
Install & Safety Video
Shop Notes
Ask us about FFS in-house install.
Finish choice is not guaranteed. Spacers may ship in silver or black depending on current availability.
International customers are responsible for all applicable duty, tax, customs, and import charges. These fees vary by country and may be collected at delivery. If an international order is refused, the customer is still responsible for shipping-related charges incurred.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option.
There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk.
Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine.
The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two).
In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles.
Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need.
The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup.
Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Perfect for Adding Privacy to a Piano Studio
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
I Ordered the 2 Panel version which is way too big for my needs... that's on me. So keep in mind that the picture shows a fabric made for two panels only being used on one and hence it is not pulled tight; it would pull tight and not be so wrinkly if it was set up properly as two panels. The metal pools that make up the panels seem to be well made, stable, and of good quality. They were very easy to put together and they stand up tall with plenty of height. The appearance of it with the fabric on it isn't as elegant as it could be, but it still looks good enough. The material is plenty solid, not allowing light through it, and thereby making a solid barrier. I am using it to block the view out the studio door when a student is sitting at the piano to avoid distractions from the hallway. It will allow a student to enter the studio with our distracting the student who is at the piano.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Room Divider That Gives Instant “This Is a Separate Space Now” Energy
Size: 3 Panel 12FT W
The Siebwin 3 Panel Folding Privacy Screen is surprisingly effective at changing the feel of a room without requiring construction, commitment, or somebody yelling about load bearing walls. The 12 foot width gives a substantial amount of coverage, making it useful for creating privacy, dividing open areas, blocking visual clutter, or setting up temporary sections within larger rooms. This saved us a ton of time and money in our new studio and enabled us to create a kitchen and office in one room.
The wider feet make a huge difference because flimsy room dividers that collapse every time someone exhales too aggressively are deeply annoying. This one feels more stable and grounded once positioned. The folding design makes it easy to move around or adjust depending on the space, and it folds down relatively compactly when not in use. It is basically the introvert curtain wall of dreams.
The material has a clean, neutral look that blends well into different room styles without screaming “temporary office cubicle panic.” It works well for apartments, studios, shared spaces, dressing areas, or simply hiding the mountain of chaos you swear you are going to organize tomorrow. Practical, portable, and refreshingly easy to use without turning setup into a three hour emotional event.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026