SKU: 76442609739

RAM Garmin Cradle - Rino 610, 650 & 655t with EZ Strap Handlebar Base

$69.30 $77.00
Save 10%
No.2 Bestseller on prudentsource.com >

Pay in installments of $19.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 4 - Aug 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

RAM Garmin Cradle - Rino 610, 650 & 655t with EZ Strap Handlebar BaseRAP SB 187 GA47 RAM EZ Strap Rail Mount for Garmin Rino 610, 650 & 655t Series Features: * High strength composite cradle for Garmin Rino 610, 650 & 655t * Full access to all ports * RAM EZ Strap base can be cut to fit tubing, square rails and irregular shapes from 12. 7 to 65. 5mm in diameter * High strength composite construction ensures product longevity * Lifetime warranty Ideal for ATV, bicycle or motorcycle use the RAP SB 187 GA47 consists of

RAP-SB-187-GA47 RAM® EZ-Strap™ Rail Mount for Garmin Rino 610, 650 & 655t Series

Features:

* High strength composite cradle for Garmin Rino 610, 650 & 655t
* Full access to all ports
* RAM EZ-Strap™ base can be cut to fit tubing, square rails and irregular shapes from 12.7 to 65.5mm in diameter
* High strength composite construction ensures product longevity
* Lifetime warranty


Ideal for ATV, bicycle or motorcycle use - the RAP-SB-187-GA47 consists of the RAM EZ-Strap™ base, double ball SHORT arm, diamond adapter base and high strength composite cradle. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the mount to your optimum viewing position. This mount rotates 180 degrees.


The RAM EZ-Strap™ installs in seconds and grips tubing, square rails and irregular shapes like a Python. This gem of a mount is ideally suited for smaller electronic devices like iPods, iPhones, GPS, and other similar devices. Attach devices to your motorcycle, bicycle, ATV, golf cart and more. The RAM EZ-Strap™ is extremely strong and low cost.

The RAM EZ-Strap™ can be cut to fit tubing, square rails and irregular shapes from 12.7 to 65.5mm in diameter. The EZ-Strap™ mount will attach directly to RAM Mount cradles that have a hole pattern that will match the diamond adaptor. This mount rotates 180 degrees.


The high strength composite cradle and hole pattern will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern.


Compatible Devices

Garmin
Rino 610
Rino 650
Rino 655t


Note: this product does not include the Garmin GPS unit itself


Rail Dimensions:
12.7mm to 65.5mm (0.5" to 2.58")

EZ-Strap Material:
High strength composite with rubber lined strap


Weight:
308 grams (.68 lb)


Weight Capacity
226 grams (.5 lb)

Components:
RAP-SB-187U RAM EZ-STRAP SYSTEM WITH DIAMOND Base adaptor
RAM-HOL-GA47U RAM HOLDER FOR RINO 610, 650 & 655t


Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 76442609739

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 22 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
Kevin
Massapequa, US
★★★★★ 5
Awesome lights
Color: 2Pcs 18W LED Flood Light
Very ruggedly built, good quality. Excellent price. Stainless steel hardware. Bright, clear light .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
F
Verified Purchase
Fisherman337
Alexandria, US
★★★★★ 5
Great lights
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
Great product, the lights are crazy bright, I put them on a four wheeler and the lights are cheaply priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
A
Verified Purchase
Amazon Customer
Chelsea, US
★★★★★ 5
Bright lights
Color: 2Pcs 18W LED Flood Light
Installed on my garden tractor , they work much better than the stock headlights, now I can see what's in front of me at night
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 10, 2026
P
Verified Purchase
P. Schmidt
Charlottesville, US
★★★★★ 4
Good quality, bright, good light projection pattern, good choice for snowblowers
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
This review is ONLY for the Nilight model 1260LM (the package of TWO of them). This product has a flexible design, allowing it to be used in a variety of ways when you want to add illumination to a vehicle of some kind. It can be used as add-on fog lamps for trucks and off-road vehicle, it can be used as headlights for golf carts and such, and it is a good choice for adding headlights to snowblowers. The two mounting brackets allow swiveling and angling up and down for best aim and illumination pattern. Each 'lamp' assembly is mostly made of black anodized or black powder-coated aluminum, with a water-resistant design. The front 'lens' is Lexan or some other suitable clear plastic material with good, durable properties. The manufacturer claims that the included mounting hardware (bolts, nuts, washers) are stainless steel, but they seem to weigh too little to be SOLID stainless. Whatever they are made from, they do not attract strong (neodymium) magnets. Because I bought the lamps to use on my snowblower, I decided to replace the included hardware with solid stainless hardware. The large bolts for mounting the brackets are M8 x 1.25 and the smaller bolts for attaching the lamps to the brackets are M6 x 1.0. I also chose to purchase the smaller bolts with 'cap head' bolts, because it make lamp angle adjustment much quicker and easier. Each included bolt comes with a flat washer and a split-ring lockwasher, and the large bolts also come with nuts (the smaller bolts thread directly into pre-tapped holes in the lamp bodies). The included lockwashers make sense for the main mounting bracket bolts, but there is no reasonable place to use the lockwashers of the smaller bolts. I inquired of Nilight tech support, and they clearly had never thought about WHERE those lockwashers should be used, and they concluded that they probably should NOT actually be used. Each lamp has a short (perhaps 6") 'pigtail' cable coming out of one rear edge, and these cables each have a pair of wires inside; a RED one for + and a BLACK one for - . The user can wire these up any way that is desired, but probably they will be wired in parallel in most situations. I wish that the cables were longer; as it is, it is necessary to splice them to other cables in places that will not be hidden from view and/or otherwise protected from the elements. These lamps are designed to operate on 12VDC power, although the exact voltage is not critical. There is no need to use a special LED power supply, since the lamps include their own internal power conditioning circuitry. Powering these from 12VDC, EACH lamp will required 1A of current, to 2A total when wired in parallel. This comes to 12V x 2A = 24 Watts. In my case, I needed to power the lamps from a cordless power tool battery which produces a nominal 20VDC, which can drop as low as about 16V. Accordingly, I used one of the ubiquitous and inexpensive "DC Converters" (aka "DC-DC Converter") with an input having a voltage range that includes the expected 16~20V of the battery, and has a regulated 12V output, and has a Power (Watts) rating of at least twice the expected load, in this case a 60W one from Amazon. Since these converters have nearly a 100% efficiency, the input and output power (Watts) will be the same value, 24W. Doing the math in my case, an assuming an average battery voltage of 18V, the math is 24W / 18V = 1.3A. My battery has an Amp-Hour (Ah) of 4, so 4 / 1.3 = about 3 hours of operating time for the two lamps from a fully charged battery. My only gripes with the product have already been mentioned: - overly short power cords - poorly conceived hardware 'package'; the smaller lockwasher are useless, and the associated bolts should have had cap heads instead of hex heads (I won't complain about the lack of sold stainless steel hardware, since that would have driven the selling price WAY up)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026
M
Verified Purchase
michael jones
San Leandro, US
★★★★★ 5
LOVE these LIGHTS !!!
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
i put 2 on the front of my 24" ariens snowthrower and it actually was to much !!! using one now and PLENTY of light !!! i have lots of dewalt batteries and i bought a adapter that allows me to put a battery in and has switch and fuse , wired to light and used one of my old 2AH batteries and it lasted 2.5 hours no problem , non stop . my newer batteries are 6 and 8 AH and last up to 8 hours before recharge . LOVE these LIGHTS !!! installing one on ladder rack on rear of truck . you know how many times that will be used on a late evening or early start so i can see to load or unload .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 6, 2026

recommand products

Graded 2024 Topps Now Paul Skenes #179 Major League Debut Rookie RC Baseball Card PSA 10 Gem Mint
144.99
ODK Black Chest of Drawers Bedroom, Dresser Cabinet with 2 Sockets, 2 USB Ports and 10 Colored LED Strips, Chest Drawers with Shelf 9 Fabric Drawers for Bedroom Living Room, 130 * 30 * 97cm
123.84
Autographed/Signed Jeremy Swayman Boston Black Hockey Jersey JSA COA
155.95
Autographed/Signed Breece Hall New York White Football Jersey JSA COA
149.99
Karran 34" Drop In/Topmount Quartz Composite Kitchen Sink with Accessories, 50/50 Double Bowl, Brown, QT-720-BR-PK1
187.47