SKU: 85639662040

Campagnolo Super Record (1049/A) Strada Vintage 170 mm Road Chainset

Sale price$93.57 Regular price$103.97
Save 10%

Pay in installments of $25.99 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 3 - Aug 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Campagnolo Super Record (1049/A) Strada Vintage 170 mm Road ChainsetOriginal part in production from the 1970s to the 1980s Suitable for historic cycling events such as L'Eroica Professionally checked & cleaned Worldwide shipping Campagnolo Super Record chainset (or crankset, if you prefer), hailing from Italy and in production from the 1970s to the 1980s. Made from aluminium and weighing in at 615 grams pretty lightweight for a chainset at that time. A fine choice for keeping your vintage bike authentic, but also

✓ Original part - in production from the 1970s to the 1980s
✓ Suitable for historic cycling events such as L'Eroica
✓ Professionally checked & cleaned
✓ Worldwide shipping

Campagnolo Super Record chainset (or crankset, if you prefer), hailing from Italy and in production from the 1970s to the 1980s. Made from aluminium and weighing in at 615 grams - pretty lightweight for a chainset at that time. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

If you're taking part in L'Eroica or a similar vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong chainset!

The chainset's been carefully cleaned, thoroughly checked by one of our mechanics and graded as good condition, but do take a good look at the detailed photos so you can see the cosmetic condition before you buy.

OVERVIEW


Body Condition - Good
Chainring Condition - Good
Model ID - 1049/A
Production Era - 1970s & 1980s
Country - Italian
Material - Aluminium
Weight - 615 g
Stock Code - U-G3-CS143V

TECHNICAL INFO


Chainring Count - Double
Tooth Count - 52 / 44
Bottom Bracket Type - Square Taper
BCD - 144 BCD
Crank Arm Length - 170 mm
Chain Width - 3/32" (Standard)
Pedal Threads - Standard (9/16" x 20 TPI)
Intended Speed* - 5 Speed, 6 Speed, 7 Speed
Bike Type* - Road
Matching Bottom Bracket(s)* - Campagnolo (Pre-CPSC) - Nuovo Record (1046/A) / Super Record (4031) - 112 mm (113 mm ITA)

*See help section.

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

SAFETY & COMPLIANCE
This product complies with the EU General Product Safety Regulation (GPSR). Professional installation and regular inspections are recommended. Due to the product's age, extra care should be taken during use.

Product Manufacturer - CAMPAGNOLO Srl, Via della Chimica 4, 36100, Vicenza, Italy

EU Authorised Representative - Global Trade Department NI Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast BT9 6AG, Northern Ireland

HELP SECTION

Chainring Count - the number of chainrings on the chainset. Fixed gear track bikes, single-speeds and some geared bikes use a single chainring, road bikes commonly use a double (two rings) and most touring bikes and mountain bikes will use a triple chainset (three rings).

Tooth Count - the number of teeth on the chainring(s), the higher the number the harder the gear.

Bottom Bracket Type - ‘square taper’, as the name suggests have a square shaped axle that slots into the chainset and ‘cottered’ axles are round and secured by pins - pretty much every bike up until the 1990s would use one of these, cottered being the much earlier system. Since then, different manufacturers have introduced their own systems that are not interchangeable so you must use a chainset that matches.

BCD - stands for Bolt Circle Diameter (sometimes referred to as PCD - Pitch Circle Diameter) and is only really needed when changing chainrings. To calculate the BCD, measure the distance in millimeters from the centre of any chainring bolt to the centre of an adjacent one and multiply it by 1.709 (you’ll likely need to round the resulting number up or down a little to get your BCD measurement).

Crank Arm Length - this is measured from the absolute centre of the bottom bracket hole to the centre of the hole for the pedal.

Chain Width - this is mostly only relevant for chainsets with a single chainring - if this is ⅛” then you must use a ⅛” chain. Almost all double and triple (and some single) ring chainsets will use a standard 3/32” chain, the only exception being old chainsets designed for 3 or 4 speed freewheels.

Pedal Threads - this must match the thread of your pedals and is usually stamped on the pedals themselves, most bikes use a standard thread of 9/16” x 20 tpi. The exceptions being older French bikes, bikes with cheaper one-piece type chainsets and Shimano’s Dyna Drive system (easily identifiable as the pedal holes are about an inch wide!).

*Intended Speed - the number of cogs at the back the chainset was designed to be used with. We refer to it as ‘intended’ speed as most double and triple chainsets will actually work with different speeds than originally intended, but the further away you get from the intended speed the more likely you are to experience minor setup issues. The exception being some chainsets intended for 10 speed use or higher, with these it’s better to stick to the intended speed.

*Bike Type - this is just a guide, any chainset can technically be used on any bike as long as everything's compatible.

*Matching Bottom Bracket(s) - if known, based on standard rear spacing of the period. For square tapers, ISO and JIS standards were introduced in the early 1990s; earlier cranks were designed to fit the proprietary taper. Alternatives can achieve the same chainline and clearance if the axle has the same taper and dimensions, and sticking to the same manufacturer and era will help. Mixing tapers is not recommended, as it can damage the cranks.

NB: “ITA” refers to Italian-threaded frames (70 mm BB shell).


Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 85639662040

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
MW
Whiting, US
★★★★★ 1
Squeaker inside toy breaks after 2 days
Size: Mini, Color: Gator (Pink)
Bought for my 8 lb chihuahua for Christmas. I have 3 little girls. The youngest loves her toys and of course she took this one over immediately. She just loved everything about it. The material on the gator is amazingly durable and I believe would hold up for a good while. The squeaker inside the toy however, broke after 2 days of my girl playing with it. It's now a noiseless toy that she does not like too much as it does not squeak because it only had the one squeaker in it. I would recommend that 2 squeakers be inserted into this gator. I would not purchase again due to the longevity of the squeaker...only lasted 2 days.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 5, 2026
C
Verified Purchase
Celeste A
Fort Morgan, US
★★★★★ 5
Go dog toys are the best!
Size: Large, Color: Dinos Frills (Pink)
These are the only stuffed toys I buy for my Pittie because they are so well made. Even when she unstuffs them, she plays with them forever!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
A
Verified Purchase
a customer
Whiting, US
★★★★★ 5
My dog loves these toys.
Size: Mini, Color: Gator (Pink)
Not a huge toy, nor is my dog. But we have lots of goDog toys. Practically indestructible and my dog likes to carry these in his mouth and bring them onto the foot of our bed. Brilliant colors and good squeaker but my dog is afraid of the squeak. Fair value for cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 10, 2026
U
Verified Purchase
University Doc
Grantham, US
★★★★★ 5
Our XL dogs love them. Highly recommend it!
Size: Mini, Color: Gator (Pink)
Our XL dogs love this! Highly recommend them! Highly recommend. Not for aggressive chewers but our big dogs don't destroy their toys. They cherish them. Great for play and cuddling. Not to loud either. Very cute.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
V
Verified Purchase
Valhalla49
Omaha, US
★★★★★ 5
When they said strong...
...they weren't kidding. Our pup would chew through everything she could get her sharks teeth into. Like my arms. Nothing lasted as long as a week or maybe two. But she has had Dino for months now. She loves him. He is the go to toy for when she wants to play tug. The material used to make this toy is every bit as strong as the seller claims. I will definitely buy from them again. And I will not wait for this one to rip. I may be waiting a long time. If your pup likes to tear stuff apart, feel safe in buying this toy, UPDATE: 2/9/2023 Dino finally succumbed to the torture. His back ripped open and despite trying to repair him with ordinary thread he couldn't withstand the pressure, His stuffing was removed and spread all over the living room. Completely emptied he is still a good toy. Strong enough to withstand the forceful play of tug-o-war. Only thing I would suggest is to use something stronger when closing his back. The rest of him is great. I will be replacing him soon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 30, 2023

recommand products