700C 28 29 Inch 2000W Rear Ebike Electric Bicycle Conversion Kit 52v 35AH Bagged Battery

700C 28 29 Inch 2000W Rear Ebike Electric Bicycle Conversion Kit 52v 35AH Bagged BatteryBattery Certification Battery Safety Standard: IEC 62133 2 NSW Approval Number: NSW29773 For 700C wheel with a width between 700*35C to 700*55C, 28 Inch wheel with a width between 1. 75 to 2. 25 Inch, 29 Inch wheel with a width between 1. 75 to 2. 25 Inch Torque: 80. 8 N. M Wiring Method: Waterproof Wire Connection System Maximum Speed: 65 69 km h Display: Intelligent Colorful LCD Panel Display Controller: Intelligent Motor Controller, the Current is

• For 700C wheel with a width between 700*35C to 700*55C, 28 Inch wheel with a width between 1.75 to 2.25 Inch, 29 Inch wheel with a width between 1.75 to 2.25 Inch
• Torque: 80.8 N.M
• Wiring Method: Waterproof Wire Connection System
• Maximum Speed: 65 - 69 km/h
• Display: Intelligent Colorful LCD Panel Display
• Controller: Intelligent Motor Controller, the Current is 40A
• Riding mode: Twist Throttle Electric Assist Mode, Pedal Assist Mode
• Rear Fork Width Requirement:135 - 142mm
• Suitable for Disk Brake (6 Holes to Mount the Disc Rotor) and V-brake System - Hydraulic brakes require a hydraulic brake sensor, sold separately.
  
• Brake levers: Aluminum Alloy Wuxing E-brake Lever
• Rim & Spokes: Alloy Double Wall Rim, Steel Spokes
• PAS Sensor: 12 Magnets Pedal Assist Sensor
• Freewheel: Shimano TZ500 7 Speed Thread-on Freewheel
• 12 Months Replacement Warranty on the Motor & Battery
• 52V 35AH Triangle Battery with bag
• Riding Range: Up to 120km range with Pedal Assist Mode

Package Include :

• 1x 52V 2000W Rear Rim Motor
  
• 1x Intelligent Motor Controller
  
• 1x Controller Box
  
• 1x Pedal Assist Crank Sensor
  
• 1x Pair of E-Brake Levers
  
• 1x Twist Throttle
  
• 1x LCD Display
  
• 1x Cable Ties Set
  
• 1x Manual
  
• 1x 7 Speed Freewheel
  
• 1 x 52V 35AH Battery & Charger Set
  

Important Notes

• A pair of torque arms is highly recommended but is not included with this product.
• Please check your wheel size before purchasing and you can find your wheel size from the printed on the tire wall (side).
• Please check your rear fork width (135 - 142mm) to make the motor hub can be fitted into it.
• Professional installation skills are needed. Please notice that basic tools will be required when installing this DIY Kit. Otherwise, please seek a local mechanic for installation.
• The AU regulations dictate that a kit must not exceed the rated power of 250W to be road-legal. 2000W Motor is not path legal, this product is recommended for off-road or private property use only.
• Please noted that the rear motor hub will only suit thread-on freewheel which is up to 7 Speeds, the freewheel is included.
• Speed limit and riding ranges depend on the rider's weight, road, and weather conditions.