SKU: 68276650849

aFe Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media (54-13036D)

$170.58 $189.53
Save 10%
No.2 Bestseller on prudentsource.com >

Pay in installments of $47.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 23 - Jul 28

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

aFe Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media (54-13036D)Magnum Force Stage 2 Plastic Black Cold Air Intake System with Pro Dry S Filter (54 13036D) by aFe. The aFe Stage 2 Cold Air Intake System replaces your entire factory air intake system with a large high flow aFe air filter, open element airbox heat shield and a smoothly contoured, less restrictive intake tube. This system enables your engine to take in huge quantities of dense, cool, oxygen laden air. The result is better combustion, increased

Magnum Force Stage 2 Plastic Black Cold Air Intake System with Pro Dry S Filter (54-13036D) by aFe. The aFe Stage 2 Cold Air Intake System replaces your entire factory air intake system with a large high-flow aFe air filter, open element airbox/heat shield and a smoothly contoured, less restrictive intake tube. This system enables your engine to take in huge quantities of dense, cool, oxygen laden air. The result is better combustion, increased horsepower and torque, and a noticeable gain in performance.

The Stage 2 Cold Air Intake System will give you the greatest possible performance gain and the most bang for the buck. It replaces your factory, restrictive air intake system with the massive aFe performance air filter of your choice, a one-piece open element airbox/heat shield that seals against the hood, isolating the filter from engine heat, and a rotomolded plastic intake tube with smooth bends for increased airflow volume. The increased flow of cooler air to your engine will result in noticeable gains in power and performance. Cooler, denser air contains more oxygen, and more oxygen in your engine's air intake charge means better combustion, resulting in greater engine output.

The aFe Pro 5R air filter was designed to provide the maximum airflow possible, to enable your engine to make the most horsepower and torque. But aFe didn't achieve this by ignoring engine protection. The Pro 5R outperforms most other cotton gauze air filters with a 98.6% efficiency rating. The increased airflow and high filtration capability are the result of the Pro 5R's construction. It's made of 5 layers of progressively finer medical-grade cotton gauze.

The Pro GUARD 7 air filter delivers increased airflow while providing the highest level of filtration efficiency available 99.7%. The patented 7-layer progressive cotton/synthetic media in the Pro GUARD 7 consists of 5 layers of progressively finer medical grade cotton gauze, combined with 2 layers of non-woven synthetic polyester fabric with random porosity.

Competitors use constant size mesh gauze in their filters, which creates voids/openings that can allow dirt to pass through. As the progressively finer layers of gauze are stacked in the Pro 5R and Pro GUARD 7, the randomness of the openings increase, minimizing spaces with no filter media. Dust accumulates on multiple layers, increasing overall dust holding capacity and filtration efficiency.

The Pro DRY S filter combines high airflow and filtration efficiency with the convenience of oil-free maintenance. It contains 3 layers of randomly porous synthetic fabric, which allows approximately twice the airflow when compared to a typical stock air filter. The increased airflow results in more horsepower and torque, better throttle response and more miles per gallon. But this improved airflow and performance hasn't been gained at the expense of engine protection. The Pro DRY S has an excellent 99.2% filtration efficiency rating.

The pleats in all 3 filters are evenly spaced for greater dust holding capacity and the tips are rounded for better airflow. They're also 30% deeper than comparable aftermarket air filters for longer service intervals and greater dust holding capacity. The sealing surface and supporting structures are made from 100% polyurethane, to withstand extreme engine temperatures.

Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.

A specially developed 3-angle velocity stack smoothes the airflow transition from the air filter to the rotomolded intake tube. The precision design and smooth contours of the intake tube maximize airflow volume and speed for optimum power gains.

The aFe Stage 2 Air Intake System comes complete with everything necessary for installation, including comprehensive instructions. It's backed by aFe's limited 2-year warranty and made in the USA.

aFe (Advanced Flow Engineering, Inc.) manufactures performance products for late model cars, light trucks and SUVs. The company was founded in 1999 with an initial concentration on high performance air filters. Since then, the company product line has broadened to include cold air intakes, fluid filters, exhaust systems, intake manifolds, intercoolers, programmers, differential covers, transmission pans and throttle body spacers. The team of engineers, machinists, production and sales people at aFe have many years of experience in their respective positions, and together work to ensure they produce the best automotive products on the market.

Features:

  • Dyno-Proven Gains up to +8 HP & +14 Lbs. x Ft. TQ
  • Outflows Factory Intake by 36%
  • Measured Flow: 685 CFM @ 7" H2O
  • Washable and Reusable Pro 5R Air Filter for Maximum Performance
  • Open-Element Design
  • Incorporates the Factory Air Inlet Scoop
  • Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 68276650849

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 5 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
breezy
Los Angeles, US
★★★★★ 5
Good Fit
Bought for a wedding for my husband he looked good an felt comfortable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2025
G
Verified Purchase
Gary Darling
Boise, US
★★★★★ 3
Didn’t last as long as I had hoped
Pants were okay for a returned item, but certainly not the best. They lasted a few months before defects got worse. Probably will convince me to just buy new all the time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2025
R
Verified Purchase
Ryan
Boise, US
★★★★★ 5
Best Pants I've Ever Owned!!
Size: 44W x 34L Big Tall, Color: Navy Blazer
There is not a bad thing to say about these pants. They look great (I get compliments all the time, as well as people asking for information on them), feel great, are super comfortable, and are actually quite durable. I own these in blue and gray and they are by far my favorite pants to where to work. They work for both business-casual, as well as business-formal dress-codes. Buy these pants!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 27, 2023
L
Verified Purchase
lebowitzit
Pawtucket, US
★★★★★ 5
Fits Fine, Looks Great, Sizing Makes No Sense
Size: 16.5" Neck 32"-33" Sleeve, Color: White, Size: 16.5" Neck 32"-33" Sleeve, Color: White
I hate shopping for dress shirts. For me, at least, it is a thoroughly frustrating experience, mostly because there's no consistency at all to the sizing. Actually, that's not quite true: dress shirts consistently DON'T FIT ME PROPERLY, which means I have to look at a lot of shirts and scrutinize size charts - which are usually incomplete, when they're provided at all - before finally finding The One. And sometimes, like this time, I don't manage to find The One. But this shirt comes close, as I will explain. The problem stems from my physique, which I never thought of as unique, but here it is: I'm short (just under 5'4", with a 40-41" chest, a little extra weight (so my middle is about the same), a 36" waist, 33" arms when measured the traditional way (more on that later) and a 16" neck. That last measurement is the single biggest problem: most shirt manufacturers apparently think that if you have a 16' neck, you are shaped like Omar the Tentmaker. Van Heusen is no exception. Note that this shirt is listed as "fitted". Now, that's a completely amorphous descriptor, which, I suppose, is true for most shirt fit descriptors these days. But if you look at Van Heusen's "regular" fit shirts, you'll find that they think if you have a 16" neck, you must have a nearly 50" chest and your waist is over 45". That's not regular, that's freakin' portly! I was afraid to even look at any of their Big & Tall men's dress shirts -- if their idea of regular fit was this skewed, then I didn't want to know what they think Big & Tall is. Thankfully, this is a "fitted" shirt, so Van Heusen thoughtfully provides the 16" neck version with a 42-44" chest and 36-38" waist. That's the size I bought, and it actually fits me pretty well. Still a little loose for a "fitted" shirt, but it doesn't look baggy, and that's what I was after. But a little more realism in the size descriptions would be greatly appreciated. Regarding the sleeve length, I really don't know what's up. I've seen charts that tell you how to measure it, but no matter how I measure it, I never manage to come up with any of the sleeve lengths provided on size charts. I have noticed that there appear to be two ways of measuring it, though. One way, which I call the traditional way because it seems to have been around longer, starts the measurement somewhere between the edge of the shoulder and the neck. At least, I think that's where it starts -- approximately. As I said before, I never manage to come up with the same number. But by this measurement, my correct sleeve length is 32-33", and the average guy's is probably 34-35". In the last year or so, when I shopped for shirts, I found some size charts using a different method, because the numbers were a lot lower, anywhere from 22" to 28". I have no idea where they came up with that measurement, nor do I know what mine is by this method, because the shirts I ended up buying so far have all used what I referred to as the traditional method. Anyway, the shirt looked quite nice on me, right out of the package, and continues to look quite nice on me after a couple of washings. The photo I attached is what the shirt looked like after being washed twice. I wash my shirts on my machine's Delicate cycle and hang them to dry. When cared for this way, the shirt does a pretty good job of living up to the listing's claim of wrinkle resistance. It doesn't come out perfectly smooth and crisp, but it looks good enough that I don't feel inclined to iron it. I decided on a poplin shirt because I was shopping for a summer-weight shirt that would breathe well. But poplin shirts proved nonexistent in my local stores, and not all that plentiful online. Poplin shirts listed online with full size charts so I could tell whether or not they might fit me were nearly as hard to find as igloos in the Mojave Desert, and poplin shirts whose size charts indicated that they were available with dimensions that would actually fit me were somewhere between that and hen's teeth. Needless to say, I was thrilled when I found this one. But the composition of poplin appears to be open to some interpretation. I own a few poplin business shirts (which I wear without suits and ties), and upon receiving my new Van Heusen shirts, it seemed to me that my poplin business shirts were lighter and breathed better. But then it occurred to me that shirt manufacturers often treat their material with coatings that improve the luster and crispness of their shirts for display purposes, and such coatings might be why my new shirts felt stiff, heavy and not particularly airy. Not wanting to give up and send the new shirts back, I decided to take a risk and launder them to see if that improved the feel. Thankfully, it did. After two washings, my new shirts are less shiny than delivered (which I'm fine with), a lot less stiff and breathe reasonably well. So... these shirts fit well, look good and feel good. Check, check and check. That means I'm fully satisfied with them, right? Wrong -- I am NOT fully satisfied with them. It's summertime. Summertime where I live is hot and often quite humid. I wanted shirts appropriate for that weather. To me, that has always meant lightweight broadcloth short-sleeve shirts. But it seems that today's Fashion Police have decreed that there is no longer such a thing as a short-sleeve dress shirt. They have decreed that today's well-dressed men must wear heavy cotton, long-sleeve shirts year-round. Well, excuse me for living, but some of us perspire when dressed that way in summer heat. Poplin shirts were presented to me as the compromise between acceptable modern fashion and comfort. Linen shirts were also recommended, but I couldn't find a single linen shirt what didn't have a crinkly, casual finish, much less one that was intended to be worn with a tie. With extreme effort, I found a poplin shirt that fits well, and I bought two of them, but while they are more comfortable in the sticky summer heat than heavy cotton, they are NOT as comfortable as my old short-sleeve dress shirts. I want new short-sleeve dress shirts, dagnab it! But until I successfully identify and locate all those insane Fashion Police, blow up their air conditioners and confine them to a Chicago Summer Simulator (otherwise known as a sauna) for three days in their heavy cotton shirts so that they will once again bless the manufacture of short-sleeve dress shirts, I guess these Van Heusen fitted long-sleeve poplin shirts will have to do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 30, 2024
T
Verified Purchase
Tom McCartney
Massapequa, US
★★★★★ 5
Great quality and true to size labeled.
Size: 16.5" Neck 32"-33" Sleeve, Color: White
Top quality shirt at a great price. Sleeve and neck size true to as labeled. Material lightweight, which is perfect. I could not be happier with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026

recommand products

Little Floral Print Tassel Scarf In Brown
34.00
Dot Print Button Down High Low Strappy Dress In Light Blue
45.00
Leopard Print Frill Trim Sleeve Frill Neck Blouse Top In Brown
52.00
V Neck Lace Mini Dress In Red
70.00
50FT RE-COIL AIR HOSE
14.99