6" Camlock Female Hose Coupling & Clamp (Aluminum)

6" Camlock Female Hose Coupling & Clamp (Aluminum)6" Female Camlock With "Hose Shank" & Clamps Our aluminum quick connect camlock barb allow you to attach any 6" diameter hose. Then you can simply use your hose as a "camlock hose". These are the easiest and most convenient hose couplings you can find. With these "hose shanks" you can simply slide your hoses on, and band the hose down with our simple screw style clamps. You don't need any special tools to operate camlock adapters. Just flip the

6" Female Camlock With "Hose Shank" & Clamps

Our aluminum quick connect camlock barb allow you to attach any 6" diameter hose.  Then you can simply use your hose as a "camlock hose".  These are the easiest and most convenient hose couplings you can find.  With these "hose shanks" you can simply slide your hoses on, and band the hose down with our simple screw style clamps.

You don't need any special tools to operate camlock adapters.  Just flip the handles up, insert the male end, and lock them down.

Specifications:

• Body Material: Aluminum
• Camlock Female Diameter: 6"
• Hose Shank Inside Diameter: 6"
• Maximum Operating Pressure: 150 PSI
• Maximum Operating Pressure Using Screw Style Clamps: 50 psi
• Type: Quick Disconnect
• Straight Body With Two Openings
• Aluminum Is Corrosion & Tarnishing Resistant
• Seal: Buna-N

Hooking It Up

It takes about a minute to hook your hose up with these connectors.

1. Slide your hose straight into the barb end.
2. Band it together with (2) screw operated hose clamps.
3. That's it, you're finished!

The standard screw style hose clamps are good for up to 50 psi which is good for residential and light industrial use.  If you have higher water pressures you'll need to get it banded with stronger clamps and a clamping tool.  Give us a call and we can help you with this +1 (510) 237-5000

The aluminum cam and groove fitting has a straight body with two openings for connecting two hoses or pipes with cam and groove fittings The body is made of aluminum for lightweight operation, and it has cam lock levers for locking the fitting's male groove adapter into female cam couplers. Equipped with a nitrile rubber seal so it's rated for fuel service transfer, or use in commercial or industrial flow systems, such as water transport and treatment, waste management, and in petroleum systems, among others, but it should not be used in compressed air or steam applications.